Processing

Search By Category

Search By Manufacturer

Search By Country

Building Filters

856

Used extruder control panels

  • Trusted Seller
    GEA/Niro/Aeromatic E140 Radical Basket Extruder

    GEA/Niro/Aeromatic E140 Radical Basket Extruder

    • Manufacturer: Niro

    GEA/Niro/Aeromatic E140 Radical Basket Extruder - Stainless steel contact parts - NICA system control panel - Nominally rated 0.5-2 kg/minute capacity - 0.37 kw, 20-160 rpm feeder motor - 0.75 kw 20-140 rpm impel...

    Ohio, USA
  • Trusted Seller
    0.375" Randcastle Microtruder Extruder, Model

    0.375" Randcastle Microtruder Extruder, Model RCP-0375

    • Manufacturer: Randcastle

    0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed .375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electr...

    Cleveland, OH
  • Trusted Seller
    0.375" Randcastle Microtruder Extruder, Model

    0.375" Randcastle Microtruder Extruder, Model RCP-0375

    • Manufacturer: Randcastle

    0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used 0.375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed se...

    Cleveland, OH
  • Trusted Seller
    2.5" Davis Standard Extruder, 24:1,

    2.5" Davis Standard Extruder, 24:1, 50 HP

    • Manufacturer: Davis-Standard

    2.5" Davis Standard Extruder, 24:1, 50 HP Used 2.5" Davis Standard extruder, model 25IN25H, 24:1 L/D, electrically heated, air cooled, jacketed feed section, top vented and plugged barrel, 17.2:1 gearbox ratio, 1...

    Cleveland, OH
  • Trusted Seller
    4.5" NRM Extruder, 20:1 L/D,

    4.5" NRM Extruder, 20:1 L/D, 150 HP

    • Manufacturer: NRM

    4.5" NRM Extruder, 20:1 L/D, 150 HP Used 4.5" NRM Pacemaker extruder, 20:1 L/D, electrically heated, air cooled, 150 HP DC motor with SCR, control panel with 4 barrel, 1 die zone with temperature controllers.

    Cleveland, OH
  • Trusted Seller
    0.75" Brabender Extruder, 25:1 L/D,

    0.75" Brabender Extruder, 25:1 L/D, Model 2503

    • Manufacturer: Brabender
    • Model: 2503

    0.75" Brabender Extruder, 25:1 L/D, Model 2503 Used 0.75" Brabender extruder, model 2503, 25:1 l/d, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 volt, serial# 1313.

    Cleveland, OH
  • Trusted Seller
    3.5" Davis Standard Cold Feed

    3.5" Davis Standard Cold Feed Rubber Extruder

    • Manufacturer: Davis-Standard

    3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...

    Cleveland, OH
  • Trusted Seller
    1.25" Killion Extruder, 24:1 L/D,

    1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath

    • Manufacturer: Killion

    1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath Used 1.25" Killion single screw extruder, 24:1 L/D, electrically heated, air cooled barrel, jacketed feed section, driven by 5 hp DC motor drive, on stand with co...

    Cleveland, OH
  • Trusted Seller
    4.5" Davis Standard Extruder, 30:1

    4.5" Davis Standard Extruder, 30:1 L/D, 150 HP

    • Manufacturer: Davis-Standard

    4.5" Davis Standard Extruder, 30:1 L/D, 150 HP Used 4.5" Davis Standard Thermatic extruder, model 45IN45HT, 30:1 L/D, air cooled barrel, jacketed feed section, vented barrel, gearbox rated 365 hp, 17.4:1 gearbox ...

    Cleveland, OH
  • Trusted Seller
    6" Davis Standard Egan Extruder,

    6" Davis Standard Egan Extruder, 44:1 L/D, 400 HP

    • Manufacturer: Davis-Standard

    6" Davis Standard Egan Extruder, 44:1 L/D, 400 HP Used 6" Davis Standard Egan extruder, model 6026-D.R.H, 44:1 l/d, electrically heated, water cooled barrel, jacketed feed section, vented barrel with vacuum pump,...

    Cleveland, OH
  • Trusted Seller
    45MM Theysohn Twin Screw Extruder,

    45MM Theysohn Twin Screw Extruder, 60 HP, 36:1 L/D

    • Manufacturer: Theysohn Extrusion

    45MM Theysohn Twin Screw Extruder, 60 HP, 36:1 L/D Used 45mm Theysohn Twin Screw Extruder, model TSK-N-045, co rotating screw, 36:1 L/D ratio, electrically heated, water cooled barrel, (1) feed, (2) top and side ...

    Cleveland, OH
  • Trusted Seller
    19 mm Baker Perkins Twin

    19 mm Baker Perkins Twin Screw Extruder, Model MP-19-TC

    • Manufacturer: Baker Perkins

    19 mm Baker Perkins Twin Screw Extruder, Model MP-19-TC Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 40:1 l/d, electrically heated, water cooled barrel, spl...

    Cleveland, OH
  • Trusted Seller
    53 mm W & P

    53 mm W & P Twin Screw Extruder, 40:1 L/D

    • Manufacturer: WP

    53 mm W & P Twin Screw Extruder, 40:1 L/D Used Werner & Pfleiderer twin screw extruder, model ZSK53, 53mm twin screws, co-rotating, 40:1 L/D, electrically heated, water cooled barrel with (7) barrel sections, 60 ...

    Cleveland, OH
  • Trusted Seller
    19 MM APV Baker Perkins

    19 MM APV Baker Perkins Twin Screw Extruder, Model MP-19-TC

    • Manufacturer: APV

    19 MM APV Baker Perkins Twin Screw Extruder, Model MP-19-TC Used 19 MM APV Baker Perkins twin screw co rotating extruder, model MP-19-TC, 19 mm diameter screws, 25:1 l/d, electrically heated, water cooled barrel,...

    Cleveland, OH
  • Trusted Seller
    18 MM Leistritz Twin Screw

    18 MM Leistritz Twin Screw Extruder, Model MIC18PH/GL-35D

    • Manufacturer: Leistritz

    18 MM Leistritz Twin Screw Extruder, Model MIC18PH/GL-35D Used Leistritz twin screw extruder, model MIC18PH/GL-35D, 18 mm screws, co-rotating screws, 35:1 l/d, 500 rpm screw speed, electrically heated, water cool...

    Cleveland, OH
12345

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.