Used Materials Testing in Shandong, China

HB-3000B Brinell Hardness Tester

Use HB-3000B Brinell hardness tester is a bench-top hardness tester, suitable for the Brinell hardness of annealed and normalized workpieces, casting parts, non-ferrous metals and softer parts or unhardened steel...

Miniature Axial Extensometers – Model 3442

• Manufacturer: Epsilon

Weighing as little as 8 grams, these miniature extensometers are designed to have very low operating force with minimal specimen influence. All use an improved version of Epsilon’s dual flexure design which makes...

Rugged, Long Gauge Length Extensometers – Model 3543

• Manufacturer: Epsilon

With over 15 years of proven reliability in the world’s most demanding testing environments, the Model 3543 extensometer is designed to survive in those applications where standard axial extensometers would not. ...

HVS-ZA Vickers Hardness Measuring System

• Manufacturer: Vickers

HVS-ZA Vickers Hardness Measuring System 1. This system can match a variety of Vickers hardness tester to upgrade stand-alone hardness tester or computer measuring system. 2. This measuring system can be integrat...

HVS-120TZG Advanced automatic turret digital display Vickers hardness tester

• Manufacturer: Vickers

Production Introduction Advanced automatic turret digital display Vickers hardness tester It adopts electronic electric loading, high-precision sensor, and has a unique closed-loop control system, and each gear f...

570HAD Digital Multi-functional Hardness Tester

Testing force（n）: Initial Testing Force | Total testing force: 588.4（60kg） | Indenter: Diamond Vickers Indenter | Scales: HBW1/30 | Max height of samples: 175mm | Hardness scale: Value of Hardness Block | Hra: ...

HPS-20 automatic plaster hardness tester with software c

Item: Quantity | Host: 1 | Test anvil: 1 | Instrument case: 1 | Data software: 1

HBRV-187.5 Motorized Brinell Rockwell & Vickers Hardness

• Manufacturer: Vickers

Hardness scale: Displayed Value of Hardness Test Block | Hra: 20～≤75HRA | >75～≤88hra: ±1.5HRA | Hrb: 20～≤45HRB | >45～≤80hrb: ±3HRB | >80～≤100hrb: ±2HRB | Hrc: 20～≤70HRC | Hardness value of standard testing blo...

TLS-W1000N Computer Control Spring Tensile and Compression Tester

Main Parameter 1. Max. test force: 1000N 2. Test force dividing class：×1, ×2, ×5, ×10 all four classes 3. Test force measuring range: full range of 100N- 1000N 4. Displacement resolution: 0.01 mm 5. Displacement ...

Averaging Axial Extensometers for Large Compression Samples – Model 3542RA

Designed primarily for compressive strength tests on rock, concrete and other large compression samples, this model measures axial strain on opposite sides of the test specimen, and the output is an average of th...

HBV-30A BRINELL & VICKERS HARDNESS TESTER

• Manufacturer: Vickers

DX-400 Gauging Length Instrument of Tensile Specimen

• Manufacturer: JINAN LIANGONG TESTING TECHNOLOGY

1. Overview DX-400 Manual Tensile Specimen Gauge Length Meter is the specialized equipment which is designed and made according to national standard GB/T228-2010. Gauge length is correct, high-efficient and easy ...

Knife Edges for Extensometers

• Manufacturer: jinan testing equipment ie

Patent technology of TE: Auto calibration for load & extensometer

• Manufacturer: TE

TE electronic calibration module provides an easy way to calibrate load cell or extensometer and signal conditioning electronics without using a mechanical calibrator. It enables performing on-site electrical cal...

Patent technology of TE: Auto calibration for load & extensometer

• Manufacturer: jinan testing equipment ie

TE electronic calibration module provides an easy way to calibrate load cell or extensometer and signal conditioning electronics without using a mechanical calibrator. It enables performing on-site electrical cal...