Used Mineral Processing

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP

• Manufacturer: FLSmidth

- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...

21 x 11 ft Hardinge SAG mill with 2,875 HP

• Manufacturer: Hardinge

21 x 11 ft Hardinge SAG mill with 2,875 HP - Mill is currently removed and in storage - Without liners or bolt package - Nuttall gear reducer - McLellan liner handler available separately - Spare motor available...

22 x 7 ft (6.7 x 2.1 m) Hardinge SAG Mills

• Manufacturer: Hardinge

22 ft x 7 ft (7 x 2 m) Hardinge SAG Mills - Motor Quoted separately - Previously ran on two 800 HP motors - Dual Flender gearboxes - Shell reconditioned

32 x 12 ft (9.8 x 3.6 m) Hardinge Koppers ( Metso) SAG Mill 6800 HP

• Manufacturer: Hardinge

32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW) Two GE wound rotor induction motors: - 3400 HP - 710 RPM - 4000 V - Includes motor starter. - Includes lube system and temperature sensors. - F...

36 x 17 ft (11x5m) Unused FLS SAG Mill with 18,350 HP (13,5009 kW)

- Unused surplus FLS Fuller-Traylor SAG mill - ABB brand 13,500 kW (18,350 HP) drive - Wrap around style drive motor - Braking system - Complete liner package - Feed chute - Hydraulic jacking system - Specialty t...

New Galigher-Style Vertical Pump, Series 5000

• Manufacturer: Galigher

- Galigher style vertical sump pump - Interchangeable with original Galigher pumps - 5,000 series heavy duty pumps - Natural rubber wear parts - Heavy duty bearing assembly and mechanical components - Belt guard ...

New Galigher Style Series 1000 Vertical Pumps

- Galigher Style pumps interchangeable with Series 1000 - Totally sealed bearings - Bottom box and top plate coated in vulcanized rubber - Semi-open impeller coated with abrasion-resistant polyurethane - 4140 ste...

Krebs Cyclone model D6B-12-838

3 units available SPARE PARTS (Additional Cost): - 4 each - Inlet Head Liners - 4 each - Liner Top Cover Plate - 4 each - Cylinder Liner - 4 each - Skirt - Urethane - 4 each - Apex Insert - 4 each - Urethane Skir...

MSI Xtruder 255 Concentrating Table

• Manufacturer: MSI

Recovers Fine Gold Down To 400 Mesh Full Variable Speed Control And Simple To Operate Fresh Water Can Be Used or Pumped With Its Own Recirculation Pump Water Is Filtered And Reapplied At The Precise Pressure Need...

Deister 999 Concentrating Table

• Manufacturer: Deister

General Model Specifications: Particle Top Size: Capacity Per Deck (3-Deck Total TPH): Dressing Water Per Deck GPM: Feed % Solids:

Knelson KC-MD30 Concentrator

• Manufacturer: Knelson

General Model Specifications: Feed Size: Style: Manual Discharge | Feed capacity: 30-40 Tons/Hr Solids (27.3-36.3 Tonnes/hr.) | Typical fluidization water requirement: 75-110 GPM (17.0-25.0 m³/hr.) | Maximum volu...

4ft. x 8ft. UHF Concentrating Table

• Manufacturer: Graphic Engineering

Drive: Baldor IDNM3542 KB Electronics VFD Overall Dimensions:

Action Mining Wave Table Package

• Manufacturer: Action Mining

Includes: (2) Action Mining M7 Wave Tables (1) Action Mining M10 Wave Table General Model Specifications: M7 Wave Table: 80-99% of Gold Recovery from Classified Black Sands 92-99% of Gold Recovery From Small Batc...

5 x 3 ft (1.5 x 1 m) SAG mill with 20 HP

- Skid mounted - Chain-driven with rollers under shell - Falk gearbox Motor: - 20 HP (15 kW) - 1750 RPM - 256T frame - 230/460 V - 3 Ph - 60 Hz

13.5 x 4 ft (4 x 1.2 m) Marcy SAG mill with 300 HP

- 13.5 x 4 ft shell - Originally designed for dry grinding - removed, disassembled, and in storage ready for inspection and shipping - Mill trunnions and wear parts protected during storage - Trunnion bearings cl...