Used Piling Rigs

2010 MOBILE B-54 AUGER RIG #1279Ta

Manufactured 2010, mounted on IHI carrier, 3 winch system (main, auxiliary and wireline), auto hammer, slide base, overhead water swivel, 300 gallon water tank, American Manufacturing piston pump, 8 speed head (m...

CYCLONE 35 COMBINATION CABLE/AUGER RIG #3578T

2 lines, 4 cylinder gas deck engine, 90’ of 4” augers, mounted on GMC single axle truck runs great, deck engine runs great, has issues with brake lines and electronic throttle control Price as is: $47,500 – locat...

CME 55 TRACK MOUNTED AUGER RIG #10533Tc

Cummins 4BT engine (new 2025), new transmission, new rubber tracks, rebuilt pumpkin, new planetary drive both 2024, 20’ mast, Moyno 3L6, breakout wrench, auto hammer Price: $205,000 CME 55 TRACK MOUNTED AUGER DRILL

SHOP BUILT AUGER RIG (SIMILAR TO CME #8944Ta

• Manufacturer: Shopbuilt

Mounted on 1989 Ford F700 2WD truck with gas engine, no angle capability, grouter, 300 gallon water tank, 2 rear hydraulic jacks, 3rd jack just for the bed, running condition Price: $24,500 MOBILE

2018 GEOTECHNICAL CUSTOM BUILT AUGER RIG #325T

Built 2018, auger drill head, core head, auto hammer, 2 winches, 3.25” or 4.25” auger, N or H core rod, two available Price: $87,500 USD Bobcat T550 with wireless remote package available at extra cost IVI PROPSE...

1990 VOLVO/AUTOCAR TRI-AXLE RIG CARRIER #4781Tb

• Manufacturer: Volvo

Cat 3406 engine, 180,000 original miles 22 pieces of 3.75” x 5’ CME hollow stem auger, cutterhead, 2 drive heads, center plug

1984 INGERSOLL RAND A-200 AUGER RIG #2871T

• Manufacturer: Ingersoll Rand

Built 1984, trailer mounted, 10’ stroke, Perkins/Detroit diesel engine, safety hammer, includes 20’ of 3-1/4” hollow stem auger Price on Request or Make Reasonable Offer

1998 CME 55 TRACK MOUNTED AUGER RIG #6813Ta

Built 1998, mounted on Morooka tracks, quick connect mast, 3 winches (12,000, 3500, 3000 lb), 72” stroke, auto hammer, auto feed detent, auto retract, hollow spindle 2-5/8”, 30,000 lb pullback, 20,000 lb pulldown...

1994 MOBILE B24 LOW CLEARANCE AUGER RIG #4201T

Manufactured 1994, good for low clearance, only 180 hours, Detuz Z790 diesel deck engine, cathead, rig mounted on square box frame with jacks, working condition Price: $15,500 Tooling available at additional cost...

Vermeer PD10R Pile Driver

• Manufacturer: Vermeer
• Model: PD10R
• Horsepower: 49 hp
• Operating weight: 7,057.9 kg

Solar Pile Driver, Solar Piling Machine, Guardrail Driver 2019 Vermeer PD10R 20’ Pile Driver Yanmar 4 Cylinder Diesel Meter Reads 2115 Hours Electric Start Autoplum Rubber Tracks Two Speed Crawler Joule 950 1500 ...

Orteco Pile Driver

• Manufacturer: Orteco

2013 Orteco FEX 1000 3.3 Ton Pile Driver Hatz Diesel 3L41C 44,2 HP Electric Start Rubber Tracks Two Speed Crawler Joule 1060 680/720 Blows per Minute Maximum Pile Diameter 8” Maximum Pile Length 15′ Machine Weigh...

2015 Casagrande B125 XP

• Manufacturer: Casagrande
• Model: B 125
• Horsepower: 225 hp
• Operating weight: 39,200 kg

2015 Casagrande B125 XP 3641 Hours 11m X 4 elements bar for drill depth of 140 feet 133mm Kelly Stub

HUTTE HBR 203-E HYDRAULIC TRACK DRILL #3447T

• Manufacturer: HUTTE

Mini rig for seismic and micro piling, electric over hydraulic start, low hours, good condition Price: $220,000

2017 CZM EK125 #9509Tc

Manufactured 2017, approx 15,000 hours Price $165,000

Vermeer PD5R Piling Rig

• Manufacturer: Vermeer
• Model: PD5R

Good condition Vermeer PD5R Piling Rigs manufactured in 2021. Located in USA and other countries. Click request price for more information.