Used Presses in Georgia, USA

Hasenclever SPK 2,000 Ton Screw Press

• Manufacturer: Hasenclever
• Stroke length: 450 mm

Diameter of screw: 400 mm | Bed of the press (width x depth): 1,120 x 1,250 mm | Ram mounting face (width x depth): 1,120 x 1,250 mm | Stroke: 450 mm | Minimum clear height: 1,020 mm | Whole stroke: 20 / min | H...

2,000 Ton Hydraulic Head Press

1st stage: 2,500 kN | 2nd stage: 5,000 kN | 3rd stage: 8,000 kN | Rated force of hydraulic cushion: 2,500 kN | Travel of the cross-piece (drawing & clamping): 1,700 mm | Maximum distance between table & drawing ...

Siempelkamp 7000 Ton Hydraulic Press

• Manufacturer: Siempelkamp
• Stroke length: 1,000 mm
• Daylight: 2,000 mm

Rexroth Hydraulics – 4 Main Pumps – 200 HP – 4,700 Gallon Rolling Bolster Material Tooling Transfer System

Bliss HS-5000 Ton Hydraulic Press

• Manufacturer: Bliss
• Capacity: 5,000,000 kg
• Stroke length: 1.07 mm

Size & Make of Pumps – Two Vickers PV-2125 & One Tuthill 6-0 Size & Make of Motor – Two West. 150 HP, One West. 5 HP 7 Four West 10/2.5 HP Make & Type of Valves Bliss – Air ControlHPV-13379 Bliss – Speed Change ...

600 Ton Hydraulic Dishing Press

• Stroke length: 1,700 mm
• Daylight: 2,200 mm

Force: 600 Ton | Working pressure: 220 kg/cm² | Stroke - up/down: 900 mm | Stroke - right/left: 1,700 mm | Daylight: 2,200 mm | Bolster: 5,500 / 1,500 mm | Pressing speed: 4 mm/second | Down speed: 100 mm/second...

Parker-Hannifin 120 Ton Twin Column Hydraulic Straightening Press

• Manufacturer: Parker Hannifin
• Stroke length: 279.4 mm
• Daylight: 457.2 mm

120 Ton HPM / Parker - Hannifin Twin Column Hydraulic Straightening Press Movable fixturing that can move with the head or disengage from the head has been added 2-Axis Traveling Gantry Type All Steel Weldment...

4,000 Ton Hydraulic Dishing Head Press

Movable table size: 5,500 x 6,000 mm | Distance between columns: 5,900 x 4,100 mm | Distance between table & ram: 3,750 mm | Pressing speed: 100 mm/sec | Height above floor: 13,370 mm | Distance below floor: 7,5...

Drilco 400 Ton x 30' Traveling Head Hydraulic Straightening Press

• Manufacturer: Drilco

POWERED HEAD TRAVERSE - CHAIN DRIVEN "V" BLOCK SUPPORTS POWER TURNING ROLLS POWERED ELEVATION OF ROLLS PRESSURE GAUGE HYDRAULIC POWER SUPPLY Cleaned, Painted, and Under Power

Siempelkamp HP 800 Isothermal Press Complex

• Manufacturer: Siempelkamp

Fully automated, self-contained isothermal Press Complex for sale from highly motivated seller! We have been asked to find a buyer for this state-of-the-art isothermal press complex. The press complex is prist...

SPS (Siempelkamp) 3500 Ton Hydroforming Press

• Manufacturer: Siempelkamp
• Stroke length: 1,350 mm

Force hydroforming: 3,500 ton | Force deep drawing: 1,600 Ton | Stroke: 1,350 mm | Moving bolster: 3,150 x 1,900 mm | Cushion force: 400 Ton | Cushion stroke: 450 mm

Tandem Press Line Composed of (5) Five Innse Single Action with Cushion Mechanical Presses Line

• Manufacturer: Innse
• Stroke length: 940 mm
• Daylight: 1.78 mm

Force: 900 ton | Stroke: 940 mm | Slide regulation: 762 mm | Day light: 1,778 mm | Table size: 4,572 x 2,464 mm | Number of cushions: 3 | Cushion force: 105 mm | Cushion stroke: 305 mm

Mossini PO/2M 1000 Ton Hydraulic Press

• Manufacturer: Mossini
• Model: PO2M 1000
• Stroke length: 1,000 mm

1000 Ton Hydraulic Press CE Mark Pressure: 10,000 Kn | Table dimensions: 1,600 x 3,000 mm | Slide dimensions: 1,600 x 3,000 mm | Lower blank holder: 600 Ton | Blank holder stroke: 400 mm | Top dead center: 1,280...

10,000 Ton Hydraulic Structural / Pipe Forming Bending & Cladding Press

• Stroke length: 1,750 mm

Pipe wall thickness range: 10 - 63.5 mm | Maximum length: 12,200 mm | Pipe diameter range: 168 - 1,524 mm | (6) six main cylinders bore: 870 mm | Stroke travel: 1,750 mm

Dake Dura Press Force 10 Ton Electrically Operated Hydraulic Powered Press

• Manufacturer: Dake
• Model: Force 10

Product Description General Info Stock #: 120250008 Location: Stone Mountain, GA Brand: Dake Model: Dura Press Force Approx. Shipping Weight: Local Pick Up Only Approx. Shipping Dimensions: Local Pick Up Only Spe...

Hannifin F-31101 30 Ton 4 Post Hydraulic Press, Magnum Press Control Retrofit

Product Description General Info Stock #: 150250002 Location: Stone Mountain, GA Brand: Hannifin Model: F-31101 Serial #: F-31105 Approx. Shipping Weight: 10,000 Lbs Approx. Shipping Dimensions: 13.5′ L x 6′ W x ...