Used Processing in Alabama, USA

Roach 165222-2 Roller Conveyer set, Width: 24", Length: 34'(9' c

Roach w/ motor 9' curved piece Model no.: 165222-2 | Roller width: 24” | Total length: 34’ | Inventory_number: FM072

Buschman 404 Roller Conveyer set, Width: 22", Length: 18'5", w/

Buschman Model no.: 404 | Roller width: 22” | Total length: 18’5” | W/ baldor vm3538 motor: 1/2 HP, 230/460V, 1725 RPM, 3Ph | Inventory_number: FM073

Buschman 604 Roller Conveyer set, Width: 22", Length: 63', w/ mo

Buschman Model no.: 604 | Roller width: 22” | Total length: 63’ | Inventory_number: FM049

Accuglide/Buschman 1103 Roller Conveyer set, Width: 22", Length:

Accuglide/Buschman 3' lift gate 1 pallet of belts 8',11',10' curved pieces

Buschman 401 Roller Conveyer set Width: 22", Length: 14'6" (3' L

Buschman 3' Lift gate w/ motor Model no.: 401 | Roller width: 22” | Total length: 14’6” | Inventory_number: FM038

Evapco Cooling Tower, model USS2280824L, s/n 16790748, closed ci

Evapco 20'L x 12"W x 14'H gpm across a 7.5F range, 20,812.5 MBH or 1387.5 “tons” (15,000 btu/ hr per ton). INV#: HO-1151, HO-1152, HO-1153

Sweco 30" sifter

• Manufacturer: Sweco

Sweco 30" sifter Freight and Local Pickup Available For Sale

C02 Horizontal Heat Exchanger, 1200 PSI @ 237F, 900 PSI @ 72F

C02 Horizontal Heat Exchanger, approx4-1/2' diax 44-1/2'L, design pressure @ 1160psig @ 237 deg F, operating pressure/ 870psig / 72 deg F, carbon steel/stainless clad, 1”PS/AS insulation, with slight glass/level ...

GDI regenerative desiccant compressed air dryer 325 CFM blower

GDI regenerative desiccant compressed air dryer, s/n 4657A/B, approx 30"diax 8'h, approx 300 gal per tank, MAWP @ 150psig/500 deg F, with control panel, spencer reactivation bower, cat no. 2005, s/n 275278, 5hp/3...

Aqua Chem Mechanical Vapor Recompression Evaporator System VTFF

Aqua Chem Mechanical Vapor Recompression Evaporator, model VTFF, 3 effect vertical tube, falling film unit, product out capacity of 1560lbs/hr, 55% SCS, 6.0%ss CoSO4, 1.24SG, @ 1663 deg F, complete with section A...

Jacobson P-160-DFF hammermill, 10 HP

• Manufacturer: Jacobsen

Entire system with screener may be availble for sale seperately The price is just for the hammermill and screw feeder Freight and Local Pickup Available, Rigging Fees Apply For Sale

Jacobson P-160-DFF hammermill 10HP

• Manufacturer: Jacobsen

Entire system with screener may be availble for sale seperately The price is just for the hammermill and screw feeder Freight and Local Pickup Available, Rigging Fees Apply For Sale

U Shaped Blender, 12'L x 60"W x 68"H, 40 HP Drive

U Shaped Blender, 12'L x 60"W x 68"H (hull dimension) with stainless ribbon blending agitator approx58"dia, with flip top cover, 40hp gear drive, 1775 rpm, plus surge hopper on load cell with pneumatic slide gate...

Tramont Sub-Base Fuel Tank Approx1,800 Gallon 14x6x3

C629 Tramont Sub-Base Fuel Tank Approx1,800 Gallon 14x6x3 **Freight Shipping**

200 HP Hammer Mill with Blunting Magnet

Green Includes Bunting Magnet Please contact for more details Freight and Local Pickup Available, Rigging Fees May Apply For Sale