Used Processing in Canada

54 Litres stainless tank on cart

• Manufacturer: Robroy Industries

-Shipping dimensions: length 57" x width 28" x height 82" -Tank dimensions: diameter 12" x height 30" -Stainless steel cart -Stainless vessel with removable lid -Max allowable workable pressure:100 PSI at 300 deg...

32,136 Litres Stainless Steel Tank

-Supported with 4 legs -Dome bottom -Flat top -304 stainless steel -7069 IMP Gallons -Tank is 232" tall with the legs 273" tall

50,006 liters Insulated stainless steel tank

-Flat bottom -Dome top -Flange on side is 1.5" -Tank Dimensions: 200" tall x 145" diameter Shipping dimensions with it laying down: -Length: 20.2 ft -Height: 10.5 ft -Approximate weight: 8,500 pounds

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping Dimensions: 12" length x 12" width x 12" height -Input/output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

940 Litres stationary tank

-Open top with lid -Stationary with fork lift accessible flat bottom -Diameter is 32.5" -Height is 47.5" -207 IMP

Lightnin Mixer

• Manufacturer: Lightnin

Model:N33G-33, HP:1/3, Volt:115, Phase:1, RPM:1725,

922 Liter Horizontal Tank

• Manufacturer: Sharpsville Container

-203 IG -MAWP 100 psi @250 F -MDMT -20 F @ 100 psi -9" from the ground to the bottom -64" tall -Certified by Sharpsville container

5 HP Scott Hammer Mill

-Shipping dimensions: length 49" x width 40" x height 30" -Model: Sh18-12 -5 HP -208-230/460 Volts -15-23.2/6.6 AMPS -1725 RPM -3 phase

Leroy Somer Blower B-1000

• Manufacturer: Leroy Somer

-Shipping dimensions: Height - 17" x Width - 14" x Length - 32" -Input / output flange - 6 1/2" -See picture of faceplate for volt/amp/hz variations. -Leroy Somer motor

700 Litres tank with heating coil

-Shipping dimensions: Height 88" x Width 50" x Length 50" -4 stationary legs, feet can be adjusted for leveling purposes, legs are 40" tall -Half closed flap lid -Port on the side is 2" -Cone bottom with a 2" dra...

4,000 Liter open top Jacketed tank with mixer mount

-Has port for mixer to be mounted -Jacketed -Legs are 14" tall and stationary -Cone bottom -81" tall x 62" diameter -1.5 threaded port on side -3" bottom port -Open top no lid

1,000 Litres Stainless steel tank with heating coil

-Cone bottom with a 2" Drain -Heating coil in the middle of the tank -4 Stationary legs of tank are 22" tall -Tank dimensions: 36" diameter x 60" tall -Shipping: Height 95" x Width 45" x Length 45" -Man whole on ...

909 Liter Stainless steel tank with dome bottom

-4 stationary legs that are 30" tall -Dome bottom with a 3" drain on bottom -1" valve on the side at the bottom -Manhole on top -Tank dimensions: 35" diameter x 58" tall -200 IMP Gallon

Gandus Saldatrici Tb - 3 Grease line heat Sealer

• Manufacturer: Gandus

-Shipping dimensions: Height - 20" x Width - 29" x Length - 16" -115 V -50/60Hz -Comes with case

227 Litres above ground steel tank for fuel/Oil

• Manufacturer: Hassco industries inc

-Shipping dimensions: length 36" x width 26" x height 60" -Double wall, ULC rated -227 L -2.5mm thick primary tank

Atlas-Copco CD 250 Dryer

• Manufacturer: Atlas-Copco
• Model: CD 250

Good condition Atlas-Copco CD 250 Dryers manufactured in 2017. Located in Canada and other countries. Click request price for more information.