Used Processing in Michigan, USA

3 Station Manual Plating Line PL2196

Poly-Pro Construction. 3 Station Manual Line $8.500 or $3,000 per Tank. 2″ Drains at bottom. 4 Support bands on each tank. Each tank is 1,420 lbs each. 3 Station Manual Plating Line PL2196

Mix Mor 3 HP Mixer MX2778

• Manufacturer: MixMor

Mix Mor 3 HP Mixer MX2778 Weight: 150 lbs | Tested by: RV | Hp: 3 | Rpm: 1750 | Shaft length: 1.50" | Clamp: Bolt On | Volts: 208-240/460

Lightnin .75 HP Mixer MX2782

• Manufacturer: Lightnin

No Shaft. Lightnin .75 HP Mixer MX2782 Weight: 25 lbs | Tested by: RJ | Hp: 0.75 | Shaft length: .75" | Drive: Gear | Clamp: Bolt On | Volts: 208-230/460

Mix Mor .75 HP Mixer MX2777

• Manufacturer: MixMor

Mix Mor .75 HP Mixer MX2777 Weight: 150 lbs | Tested by: RV | Hp: 0.75 | Rpm: 1725 | Shaft length: 1.50" | Clamp: Bolt On | Volts: 208-240/460

Neptune .50 HP Mixer MX2808

• Manufacturer: Neptune

3 Phase Stainless Steel Propeller. Neptune .50 HP Mixer MX2808

3M-Matic Model 29200 Adjustable Case Sealer MH2359

• Manufacturer: 3M
• Model: 200A

Watt: 220. HZ: 60. Weight: 350 lbs | Volts: 115 | Amps: 1.9 | Dimensions: 71"L x 30.50"W x 64"H | Hp: .16

Steel 12″L x 59″W x 23″H Flat Plate Heating Coil HC2505

Unused New Stock. Steel 12″L x 59″W x 23″H Flat Plate Heating Coil HC2505

Stainless Steel 12″L x 82″W x 36″H Grid Heating Coil HC2504

Inlet: 1.50″ Outlet: .75″ Pressure Tested. Stainless Steel 12″L x 82″W x 36″H Grid Heating Coil HC2504

Stainless Steel 12″L x 70″W x 36″H Plate Heating Coil HC2503

Inlet/Outlet: 1″. Pressure Tested. Stainless Steel 12″L x 70″W x 36″H Plate Heating Coil HC2503

Tranter Heat Exchanger HE2084

• Manufacturer: Tranter

Stainless Steel Plates Max Pressure: 100 psi Max Temperature: 230 degrees Tranter Heat Exchanger HE2084

Tranter Heat Exchanger HE2083

• Manufacturer: Tranter

Stainless Steel Plates Max Pressure: 100 psi Max Temperature: 230 degrees Tranter Heat Exchanger HE2083

Mefiag 300 GPH Cartridge Filter F2668

• Manufacturer: Mefiag
• Model: DPMSP-300

PVC Construction. Self-Priming. Magnetic Drive. (3) 10″ Filter Cartridges. Mefiag 300 GPH Cartridge Filter F2668

Hangzhou Leo 7 Cu’ Air/Hydraulic Filter Press FP2590

• Manufacturer: Hangzhou Leo

Refurbished. New plumbing. 83″ Between legs. Will need new cloths and gaskets. Hangzhou Leo 7 Cu’ Air/Hydraulic Filter Press FP2590

Klinkau 7 Cu’ Non-Gasketed Plates FP2621

• Manufacturer: Klinkau

(1) Lot of 21 Plates. Center Feed, Side Disharge. 3″ Center Feed. Side Discharge. Klinkau 7 Cu’ Non-Gasketed Plates FP2621

Watermark 5 Cu’ Air/Hydraulic Filter Press FP2600

• Manufacturer: M.W. Watermark

Has feed pump control system. 62″ Between legs Will need new cloth and gaskets. Watermark 5 Cu’ Air/Hydraulic Filter Press FP2600