Used Forging

10,000 lb Chambersburg model "L" Closed

• Manufacturer: Chambersburg CECO "L" Power Drop

Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

500kW Interpower 2-1/4" to 6" Induction Billet Heater,

Description: 500kW Interpower 2-1/4" to 6" Induction Billet Heater

1,000 ton OWZ 16" Bar diameter

Additional info: Model - HRW-1000 Working Range: Rounds: Ø 100 – 400 mm Squares: 400 x 400 mm Straightness of the bar Ø 320: 10 – 45 mm Ø 210: 10 – 25 mm Ø 130: 15 – 40 mm Ø 90: 25 – 40 mm Weight of the bar -...

100 ton Clearing HG-100-25 C-Frame

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

1986 25 ton Pahnke FM 25/64 Rail Bound, Max tongs

• Manufacturer: Pahnke

Lift tons: 25 tonnes | Max rds: 1,473 mm | Min rds: 609 mm | S-shift: 250 mm | Vertical stroke of tongs parallel to floor: 800 mm | Rail centers: 3,750 mm | Max turning circle of fully opened tongs: 2,058 mm | L...

50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger

• Manufacturer: Beche

Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...

2020 CARER R45H2 AGV SPED 9,920 lbs capacity Remote controlled

• Manufacturer: Carer

Lift tons: 4.1 tonnes

1989 Demag HSP 630/1600 63 tonne Carrying

• Manufacturer: Demag

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

1976 1 tonne Dango & Dienenthal model AMP 1000

• Manufacturer: Dango & Dienenthal AMP 1000

Lift tons: 1 tonnes | Max rds: 400 mm | Min rds: 100 mm | Model number: AMP 1000

26,400 lb (12 tonne) Lasco KGK 1600 Electro-

• Manufacturer: Lasco

Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

2,900 kg Lasco model KH 315

• Manufacturer: Lasco

Size: 2,900 kgs | Stroke: 1,100 mm | Ram l-r: 700 mm | Ram f-b: 700 mm | Anvil l-r: 700 mm | Anvil f-b: 700 mm

1970 250 ton Hatebur AMP-30 3-Die, 120ppm,

Dia: 40 mm | Tons: 250 tonnes | Builder: Hatebur | Part dia: 64 mm | Max cutoff length: 72 mm | Max die ejector: 70 mm | Min cutoff length: 19 mm | Max outer dia for combination parts: 55 mm | Max width across t...

1995 740 ton AMD model 740-2630 Bar & Billet Shear,

• Manufacturer: AMD

Bar dia: 156 mm | Max sqr: 137 mm | Model #: 740-2630 | Force: 671.3 tonnes | Ram stroke: 457 mm | Net weight: 16,783 kgs

300mm dia x 100mm height Mitsubishi

• Manufacturer: Mitsubishi

Additional info: Ring blank dia range: 52mm to 70mm Ring blank height: 110mm Main roll power: 37 kW Electrics: 220V/3/60 Edge roll O.D.: 29.5mm ~ 185mm Edge roll power: 37 kW Edge roll taper angle: 40º Medium rol...