Used Machine Tools in Saxony, Germany

Trusted Seller
WMW Niles 250x4
- Manufacturer: Niles
4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Other 3- and 4-jaw chucks and f...
Leipzig, Germany
Trusted Seller
FORKARDT F+ 200x3
- Manufacturer: FORKARDT
Flange mounting Ø 185 mm; size Ø 200 x 25 mm, pitch circle Ø 132 mm, bolt size Ø 21mm x / M12, through-hole Ø 105mm conical Jaw connection FBG 200 Clamping range of the jaws max. Ø 200mm with chuck key incl. 26 s...
Leipzig, Germany
Trusted Seller
Röhm KFD-F-EC 400/3 (Nr.35)
- Manufacturer: Röhm
Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken
Leipzig, Germany
Trusted Seller
WMW 600x3
- Manufacturer: WMW
3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key
Leipzig, Germany
Trusted Seller
PST 1,3
- Manufacturer: PST
3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting
Leipzig, Germany
Trusted Seller
WMW AW1000x800x640
- Manufacturer: WMW
clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm
Leipzig, Germany
Trusted Seller
WMW AW 330x310
- Manufacturer: WMW
Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...
Leipzig, Germany
Trusted Seller
Emag VCL 630/800
- Manufacturer: Emag
VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid trave...
Leipzig, Germany
Trusted Seller
WMW DU 250 AS
- Manufacturer: WMW
Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck
Leipzig, Germany
Trusted Seller
IMA Norte VS 800 470x340x120
- Manufacturer: Norte
from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm
Leipzig, Germany
Trusted Seller
1970 WMW AP 865x780x40
- Manufacturer: WMW
surface plate with 3 base stands Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 865 mm | Table width: 780 mm | Table height: 40 mm | Height over ...
Leipzig, Germany
Trusted Seller
1987 TOS - KURIM DU 250 AS
- Manufacturer: TOS Kuřim
Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving ...
Leipzig, Germany
Trusted Seller
1985 WMW 3880x1390
- Manufacturer: WMW
distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm
Leipzig, Germany
Trusted Seller
PERTHEN 400x250x70
- Manufacturer: PERTHEN
MESS PLATE made of granite with central T-slot guide, center distance = 120.5mm
Leipzig, Germany
Trusted Seller
WMW 1000x630
- Manufacturer: WMW
Measurement and Controlling Plate material made of special cast with steel supplement surface scraped & surface-gauged 3 single column made of cast iron with steel ball inserts and adjustment thread
Leipzig, Germany