Used Processing in Belgium

Netstal N235-90MP injection moulding

• Manufacturer: Netstal

klemkracht 900 kN injectiekracht 196 kN openingsruimte 125 - 300 mm matrijsruimte 200 - 500 mm inbegrepen: tempereereenheid trechter / mixer zonder gereedschap

conveyor

This auction features a combination of different agricultural and horticultural machinery. Including John Deere, Steyr, Case (track) tractors, Fordson vintage tractors, various mini-tractors, tire rakes, harvesti...

Mobile mixer IMF 30-60t/h

• Manufacturer: IMF

Total dimensions: Length: 15960 mm; Width: 6720 mm; Height: 8500 mm With filter 6.500 m³/h (CAMFIL Farr) With compressor 500 l With SIEMENS S7-300 control system With tank for resin 1000 l and hardener 600 l With...

Green sand mixer BMD TM240

• Manufacturer: BMD

Capacity: ±60t/h | Batch weight: ±1.5t | Cycle time: ±105s | Electrical power: ±250kW

Moisture balance METTLER

• Manufacturer: Mettler - Toledo

Dimensions: Length: 320 mm; Width: 200 mm; Height: 270 mm Max weighing capacity: 360 g, min weighing capacity: 0.5 g

Core shooter LAEMPE L40

• Manufacturer: Laempe / Röperwerk

External dimensions: Length: 3350 mm; Width: 3000 mm; Height: 3340 mm With new cabin Maximum core box size: Width: 1190 mm; Depth: 1000 mm; Height: 790 mm (for horizontal boxes) Maximum span: 1200 mm; minimum spa...

Sand compactability tester GF; PVG

• Manufacturer: GF

Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm

Polisher grinder MECAPOL PRESI, Ø 200mm

• Manufacturer: Presi

External dimensions: Length: 350 mm; Width: 380 mm; Height: 200 mm With water sprinkler With 7 additional plates

Compressor ATLAS COPCO GA55FF 605m³/h

• Manufacturer: Atlas-Copco
• Model: GA 55

External dimensions: Length: 2000 mm; Width: 1000 mm; Height: 1950 mm

Induction furnace INDUCTOTHERM 3 x 6t

• Manufacturer: Inductotherm

With control 5140kVA; 4500kW; 200Hz With 2 transformers Primary voltage: 10500V; Secondary voltage: 595V; 50Hz; 2570kVA Melting and holding warm possible at the same time With loading machines With water pump sta...

Dust filter WAM 300m³/h

• Manufacturer: WAM GROUP

External dimensions: Length: 1500 mm; width: 1350 mm; height: 3000 mm 22 filter cartridges: Length: 740 mm Pneumatic cleaning

2007 Sand feeder 31 liters, KLEIN

• Manufacturer: Klein

Inlet Ø 145 mm With control valves Inlet closure by cones Air supplied from below rather than from the pneumatic cylinder above Advantages: Lower air consumption per tonne and less wear and tear Maximum continuou...

Permeability tester GF, type SPDU

• Manufacturer: GF

External dimensions: Width 400 mm, Depth: 230 mm, Height 480 mm

Automatic core shooter LAEMPE L10

• Manufacturer: Laempe / Röperwerk

All movements are hydraulic with hydraulic unit Vacuum side clamping, plates 700 mm x 200 mm Core extraction slide 380 mm x 300 mm With gassing plate Maximum core box dimensions: width ± 700 mm, depth ± 650 mm, h...

Electric annealing furnace with railcar H&C FOURS 700°C

• Manufacturer: H&C Fours

Dimensions: Length: 1850 mm; width: 2100 mm; height: 2400 mm Internal dimensions: Length: ±1050 mm; width: ±1050 mm; height: ±1080 mm With CE With bogie car on rails With shelf on trolley