Used Processing in Colorado, USA

TRI CLOVER SANITARY FILTER

• Manufacturer: Tri-Clover

TRI CLOVER SANITARY FILTER Triclamp inlet and outlet: 2.5" | Outer diameter body: 4" | Overall length: 36" | Perforated strainer: 1/8" | Hole size, misc: ANGLE-LINE SIDE-INLET MODEL & LONG PERFORATED

DONALDSON SANITARY FILTER

• Manufacturer: Donaldson / Torit / DCE

DONALDSON SANITARY FILTER Inner diameter triclamp inlet and outlet: 2.5" | Outer dia. tube: 4" | Overall length: 32"

SANI-MATIC SANITARY FILTER

• Manufacturer: Sani-Matic

SANI-MATIC SANITARY FILTER Triclamp inlet and outlet: 2.5", | Outer dia. body: 4", | Misc: ANGLE-LINE END-INLET BODY & SHORT PERFORATED

SANI-MATIC SANITARY FILTER

• Manufacturer: Sani-Matic

SANI-MATIC SANITARY FILTER Triclamp inlet and outlet: 2" | Outer dia. body: 4" | Mesh size: 30 | Misc: ANGLE-LINE END-INLET MODEL & LONG WEDGE WIRE

SANI-MATIC SANITARY FILTER

• Manufacturer: Sani-Matic

SANI-MATIC SANITARY FILTER Tri-clamp inlet & outlet: 2.5" | Outer dia. body: 4" | Overall length: 24" | Misc: STRAINER ELEMENT MISSING

SANI-MATIC SANITARY FILTER

• Manufacturer: Sani-Matic

SANI-MATIC SANITARY FILTER Triclamp inlet and outlet: 2.5" | Outer dia. body: 4" | Overall length: 36" | Misc: STRAINER ELEMENT MISSING

PALL SANITARY FILTER

• Manufacturer: Pall

PALL SANITARY FILTER Inner diameter jacket inlet and outlet: 0.75" FNPT | Outer dia. tube: 4.75" | Overall length: 17" | Cartridge length: 10''

DONALDSON SANITARY FILTER

• Manufacturer: Donaldson / Torit / DCE

TRI-CLAMP GAUGE PORT: 1.5", GPM CAPACITY: 15 DONALDSON SANITARY FILTER

Dryer, Vacuum, Filter, Nutsche, 316L S/st, Rosenmund #D737068

• Manufacturer: Rosenmund

Dryer, Filter, Nutsche, 316L Stainless Steel Contacts, Vacuum. Rosenmund bolted dished top, center discharge, ASME code stamped, full vacuum/50 PSI internal working pressure, 90 PSI jacket working pressure.

CONTHERM SCRAPED SURFACE HEAT EXCHANGER

• Manufacturer: Alfa-Laval
• Model: 6X9

ALFA-LAVAL CONTHERM MODEL 6X9, SERIAL NO. HC4448SCN SCRAPED SURFACE HEAT EXCHANGER. HYDRAULIC ROTOR LIFT SYSTEM, CAST PRODUCT HEADS, STAINLESS STEEL PRODUCT CYLINDER. PRODUCT CHAMBER MAWP - 300 PSI @ 600 F, MEDIA...

350 GALLON TOTE TANK

• Manufacturer: SNYDER INDUSTRIES

350 GALLON TOTE TANK. HEIGHT 50", WIDTH 43". Orientation/shape: VERTICAL, SQUARE | Top/bottom: FLAT TOP, SLOPED BOTTOM | Exterior: 304 SS | Outlet: 2" NPT | Features: MANHOLE, BAFFLED

SWECO VIBRO-ENERGY SEPARATOR

• Manufacturer: Sweco
• Model: ZS24

SWECO SEPARATOR. 3 DECKS, 24" SCREENS. .5 HP, 1200 RPM, 460V, 3 PHASE, 143TZX FRAME MOTOR. DIMENSIONS: LENGTH - 72" , WIDTH - 28" ,HEIGHT - 63"

1000 GALLON PROCESSOR

• Manufacturer: Cherry Burrell

1000 GALLON PROCESSOR TANK. MANUFACTURER CHERRY BURRELL. , CYLINDRICAL, DOMED TOP , CONE BOTTOM , JACKET, 304 SS EXTERIOR, 2" TC OUTLET. MANHOLE, SPRAYBALL, THERMOWELL. HEIGHT 130", DIAMETER 90".

300 GALLON LIQUIFIER TANK

• Manufacturer: BREDDO

300 GALLON JACKETED BREDDO LIQUIFIER TANK MANUFACTURER: BREDDO LIKWIFIER MODEL: LORW SERIAL: D14837 98191 CYLINDRICAL (ROUND), DOMED TOP w/ HINGED LID , SHALLOW CONE BOTTOM JACKET, 304SS EXTERIOR 2" TC OUTL...

CLEPCO PORTABLE TANK HEATER

CLEPCO PORTABLE TANK HEATER FEATURING 3 ACCUTHERM IMMERSION HEATERS, ITT SSCF SERIES SHELL AND TUBE HEAT EXCHANGER, 85 GALLON STAINLESS TANK, 10 HP FPX-1732 SUPPLY PUMP, ASSORTED ITT DIAPHRAGM VALVES.