Used Processing in Minnesota, USA

Alloy Fixture 66” x 66” x 2.75” Base Tray with hanging frame

• Manufacturer: Alloy

This fixture is NEW, never used. Useful for high-temperature heat treatment in vacuum, atmosphere or air. The base ray can be separated from the hanging structure and used as a single layer base tray. Specificati...

Rebuilt 35” Cryo-Baffle

• Manufacturer: Torr Vacuum

Specifications Warranty Rebuilt Torr Vacuum Products Model RVS322C Cryogenic Baffle * Fits Varian and CVC 35" Diffusion Pumps. Since photo was taken, we have also replaced the outer trace cooling tubing with new...

4 SBS Quench Airs (BRAND NEW)

Quench Air Model 5084-1F – 1x Fan – Oil Cooler – $13,900.00 USD - 1x 42in 5HP Single Speed Motor (NO VFD) - Noise Level @ 3ft/1m (Full Speed) <74.0db - NEMA 3R Safety Lockout / Tagout - Inspection Port 2.0in -...

Surface Combustion Batch IQ-36X48X36

• Manufacturer: Surface Combustion

Built by Surface Combustion this is a “Super 36” model, serial number BC-44455-01; - Working Dimensions of 36″ X 48″ X 36″ - Natural Gas fired, maximum operating temperature of 1850F - 480Volt - PLC Controls - In...

3000 CFH AFC Endothermic Gas Generators (2 Available)

Late Model Brick Lined Air-Cooled Endothermic Generator complete with 2 Retorts, Eclipse Burner System, Roots Pump, Waukee Mixer, Waukee Flowmeters, and Top-Mounted Air Cooler. Free Standing Control Panel complet...

Surface Combustion Generator, 6000 CFH

• Manufacturer: Surface Combustion

Endothermic Generator built by Surface Combustion. 3 “bottles” allowing for retorts to be run independently. 480/3PH, Natural Gas Fired Burners. Good condition.

“Surface Combustion” Endothermic Generator-3,000 CFH

• Manufacturer: Surface Combustion

Manufactured by “Surface Combustion” of Maumee, Ohio this is a Model S-2-EN Endothermic generator, Serial Number BC-40932-1. - 3,000 CFH Capacity - Electrically heated, 480/3ph/60cy-45kw - Digital controller and ...

Surface Combustion RX Generator 9000 CFH, 3 Bottle

• Manufacturer: Surface Combustion

Asset number: RX-3T-ABE8 | Heat source: Natural Gas | Voltage: 480 V | Max temperature: 1950º | Type of controls: PLC Controls

Surface Combustion Unidraw

• Manufacturer: Surface Combustion

Manufactured by Surface Combustion of Maumee, Ohio this is an electrically heated Unidraw. Currently set up for a 30″ wide tray it is capable of handling a 36″ wide tray by altering the roller rails giving is a w...

Buehler Samplmet-2 Abrasive Lab Saw

• Manufacturer: Buehler

Good condition Buehler Samplmet-2 metallographic wet-saw, with complete recirculation system and dual clamps. This saw is refurbished, cleaned, tested and ready to ship. The Samplmet-2 takes up to a 9″ diamond ...

Dry Coolers Five Fan Closed Loop Cooling Fans (2 Available)

- Dry Cooler 5 Fan units. - 3” copper in & Out - Both units are in working condition - Both fan units, test run good, motor starters are in the end of the unit. - Both units have been pressure tested.and pa...

Keith Kiln - 16 cuft - Periodic Electric, 1200°C

• Manufacturer: Keith

Periodic Electric 1200°C Operational Since 1997-2001

Mesh Belt Austemper Line Available-330 Pounds/Hour

• Manufacturer: AFC

Manufactured by AFC-Holcroft at their MATTSA licensed facility this is a gas fired mesh belt austemper line with a capacity of 150kg/hour (330 pounds per hour). This a complete line with automated loading system,...

-105°F to 375°F Temperature Test Chamber

• Manufacturer: Cincinnati Sub-Zero

DESCRIPTION: Stainless Steel Lined Temperature Test Chamber complete with Single Swing-Out Front Door, Wilkerson Compressed Air Dryer for Dry Air Purge, and Liquid Nitrogen Boost Capability. INSTRUMENTATION: ...

Surface Combustion 1200 CFH Endo Generator

• Manufacturer: Surface Combustion

Manufactured by Surface Combustion of Maumee, Ohio this is a 1200 CFH capacity endothermic generator. Natural gas heated, 480/3/60, maximum temperature 1950F. Controls; Honeywell digital controller, touch screen ...

Ingersoll Rand EP75 Industrial Compressor

• Manufacturer: Ingersoll Rand
• Model: EP75

Good condition Ingersoll Rand EP75 Industrial Compressors manufactured in 1994. Located in USA and other countries. Click request price for more information.