Used frequency controller in Wallonia, Belgium

Frequency converter BOSCH 25kVA 200V 300Hz

• Manufacturer: Bosch

Dimensions: Length: 1070mm; Width: 330mm; Height: 430mm WITHOUT control box

Frequency converter HIMMELWERKE, 15 kVA 200 V. 300HZ.

15 kVA, 200 V, 300 Hz With electronic exciter Control box on request against additional cost

Frequency converter LOHER, 293 Hz, 200 V, 10 KVA

• Manufacturer: Loher

Motor type SN60M-29, serial number 5205774, 8,5 kW, 2915 rpm, 220/380 V Fixed to a frame With old control box

Frequency converter AVK, 11 KVA, 200 V, 300 Hz

• Manufacturer: AVK

With electronic exciter 12 V Wit newly rewinded motor 200 V, 300 Hz, 11 kVA New control board for an extra charge

Frequency converter LOHER, 10 KVA 200 V. 300 HZ.

• Manufacturer: Loher

Motor: type: SN60M-2G, 8,5 kW, 2915 rpm, exit 220/380 V, 31/18 A Converter type DCG1610, 10 KVA, 200 V, 300 Hz Exit 220/380 V, 24/14,without control box

2006 Motorized casting ladle, 9 t, IBW

With manual gear motor, frequency controlled With control box and remote control With mechanical switch to "tilting by hand" With planet gearbox (possible to use for treatment ladle) With counter weight on the ov...

2008 Core Shooter RÖPER FCS 25 HV-K

• Manufacturer: Laempe / Röperwerk

Dimensions of core boxe vertical: 800 x 530 x max. height 750mm Wuth hydraulic unit, power 37 kW With electric control PLC SIEMENS S7-300 With 2x shot heads Table povement by gear motor and frequency converter Ga...

2006 Green sand mixer FONDARC SCOVAL ROTOMAX RTM2000 ±40 to 50t/h 2000 kg

• Manufacturer: Scoval Fondarc

Mixing tools from above With water dosing ROTOKONTOL With power desk, witout control desk and frequency converter With mecanic discharge flap in the bottom

2003 Circular vibrator / Trowalisator VIBROCHIMICA 285l

• Manufacturer: Vibrochimica

Outer dimensions: Ø1320mm; Height: 9850mm Channel: depth: 355mm; width: 330mm 3,7kW; 400V;1500rpm With control (incl. frequency converter) With CE

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...

Amine Gas Washer BGT, 20 000 m³/h

• Manufacturer: BGT

400/690V; 29kW; 50HZ With protection basin: Ø2200mm; Height: 750mm; Volume: 2,85m³ With PH-electrode and control unit With control unit S7-300 With dust separator With exhaust fan With chimney With CE in document...

stainless corecoting mixing vessel G+F 115l

• Manufacturer: G+F

Dimensions: Lenght: 650mm; Depht: 1100mm; Hight: 1680mm 0,75KW; 685 r/min; 230/400V contenance: 115L with variable speed by frequency converter Danfoss niveau control over VEGA submersible transmitter wateradditi...

Screw mixer BORDEN, ± 2 t/h with 2 hoppers

With sand hopper, 2 compartments, contenance total ± 2,2 m³ on feet With extraction screw With additive bunker ± 0.22 m³ Wiht dosing screw and impeller The large bunker has 4 pneunamtic metering sliders The meter...

Motorized casting ladle, 20 t, IBW

Year of construction: 2004 Weight: 12 000 kg with out the lining 6380 kg. With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the oversi...