Building Filters

Used Punch Presses in Massachusetts, USA

Trusted Seller
1983 Federal No. 32 32Ton OBI Press
- Manufacturer: Federal
- Capacity: 32,000 kg
- Stroke length: 50.8 mm
Air clutch & brake. Federal time-base brake monitor model LMB-101. Inch/single/continuous/jog and bar mode. Dual palm button operation. Reeves variable speed drive. Auto-lubrication. Shadow light curtain.
Massachusetts, USA
DiAcro No. 5 Punch Press s/n BC-1000
- Manufacturer: Di-Acro
DiAcro No. 5 Punch Press s/n BC-1000 To Purchase Equipment or Make An Inspection, Contact: The Auctioneer’s Office At 617-964-1886 or
Newton, MA
No. XX Hand Punch
- Capacity: 1,200 kg
The No. XX has a deeper throat configuration than the No. 5 and can punch up to 3 1/4″ from the edge of the piece. The No. XX can also be used to punch light channels with a 1″ minimum inside dimension an a 1 3/8...
Sutton, MA
No. 7A Portable Punch
The No. 7A punch has a capacity of a 1/4″ hole through 1/8″ plate. Unlike other similar tools, this punch will punch and strip inside a 90° arc movement of the lever and the upper handle will not disengage when m...
Sutton, MA
No. XX Hand Punch in Kit
- Capacity: 1,200 kg
The No. XX has a deeper throat configuration than the No. 5 and can punch up to 3 1/4″ from the edge of the piece. The No. XX can also be used to punch light channels with a 1″ minimum inside dimension an a 1 3/8...
Sutton, MA
No. 5 Jr. Hand Punch
- Capacity: 1,200 kg
The No. 5 Jr. punch has a standard 1 3/4-inch throat depth has an optional mounting base. Includes one 3/16″ round punch and die set. Light Duty Portable Punches are for limited punching power (1.2 tons or less)....
Sutton, MA
TK 18 Station Turret Punch
- Capacity: 8,000 kg
Introducing the Tin Knocker No. 18 Hand Turret Punch. A fast,accurate and flexible method of punching in the shop. Change punch & die sizes in seconds, not minutes. Priced at what you would expect to pay for a us...
Sutton, MA
No. XX Type M Obround Punch
Sutton, MA
No. 10 Portable Punch-Ball Bearing
The No. 10 punch uses rotary ball bearing operation to provide punching capacity beyond linear operation punches. The ball bearing operation extends the life of the punch by 50% while still maintaining its portab...
Sutton, MA
No. 5 Jr. Hand Punch Kit
- Capacity: 1,200 kg
The No. 5 Jr. punch has a standard 1 3/4-inch throat depth has an optional mounting base. The No. 5 is also available as a kit with a standard assortment of round punches and dies in a durable plastic box. The st...
Sutton, MA
No. XX Type O Round Punch
Size: 0.063 (1/16), 0.078 (5/64), 0.094 (3/32-42 DS), 0.109 (7/64), 0.125 (1/8), 0.141 (9/64-28 DS), 0.156 (5/32), 0.172 (11/64), 0.188 (3/16), 0.203 (13/64), 0.219 (7/32), 0.234 (15/64-A DS), 0.25 (1/4-E DS), 0....
Sutton, MA
No. 7A Type O Punch
Size: 0.063 (1/16), 0.078 (5/64), 0.094 (3/32-42 DS), 0.109 (7/64), 0.125 (1/8), 0.141 (9/64-28 DS), 0.156 (5/32), 0.172 (11/64), 0.188 (3/16), 0.203 (13/64), 0.219 (7/32), 0.234 (15/64-A DS), 0.25 (1/4-E DS), 0....
Sutton, MA
No. 12 Portable Punch-Ball Bearing
The No. 12 punch uses rotary ball bearing operation to provide punching capacity in the medium duty range, beyond the capacity of linear operation punches. The No. 12 is able to punch up to 2 1/4″ from the edge a...
Sutton, MA
No. 16 Type O Round Punch
Size: 0.063 (1/16), 0.078 (5/64), 0.094 (3/32-42 DS), 0.109 (7/64), 0.125 (1/8), 0.141 (9/64-28 DS), 0.156 (5/32), 0.172 (11/64), 0.188 (3/16), 0.203 (13/64), 0.219 (7/32), 0.234 (15/64-A DS), 0.25 (1/4-E DS), 0....
Sutton, MA
No. 20 CTL Portable Punch-Ball Bearing
The No. 20CTL punch offers 20 tons of punching power to meet heavier job requirements, and greater versatility in punching flat sheets and angles. Includes one 1/2″ round punch and die set. No. 20 and No. CTL20 a...
Sutton, MA