- Trusted Seller
Procunier M2-M6 High Speed Tapping head Morse Taper #2 Shank 11002 (LOC2363B)
new
- Manufacturer: Procunier
Mpn: 11002 | Warehouse location: LOC2363B
$700 USDLansing, MI - Trusted Seller
Emuge SK40 7/8"-1.75" (M22-M48) Tension/Compression Tapping Chuck F3305781.16 (L
new
- Manufacturer: Emuge
Mpn: F3305781.16 | Material: Steel | Spindle type: SK40 | Tension / compression: Yes | Warehouse location: LOC3588A | Shank capacity: 7/8"-1-3/4" (M22-M48) | Edp: 55033589
$1,850 USDLansing, MI - Trusted Seller
ERI America ERTS25 Tapping Collets Lot of 38 Various Sizes (LOC2992B)
new
- Manufacturer: ERI America
ERI America ERTS25 Tapping Collets Lot of 38 Various Sizes (LOC2992B) Condition:New
$760 USDLansing, MI - Trusted Seller
Parlec CAT40 TG100 Tapping Chuck 5.35" Pro C40-10FH5 (LOC1966A)
used
- Manufacturer: Parlec
Parlec CAT40 TG100 Tapping Chuck 5.35" Pro C40-10FH5 (LOC1966A) Condition:Used
$700 USDLansing, MI - Trusted Seller
Emuge HSK63A ER20 Tension Compression Tapping Chuck HSK-A63 KSN1/HDER20 (LOC220)
used
- Manufacturer: Emuge
Emuge HSK63A ER20 Tension Compression Tapping Chuck HSK-A63 KSN1/HDER20 (LOC220) Condition:Used
$750 USDLansing, MI - Trusted Seller
Command SK50 Bilz #4 Rigid Tapping Chuck 8" Pro D6T4-8003 (LOC3281)
new
- Manufacturer: Command
Command SK50 Bilz #4 Rigged Tapping Chuck 8" Pro D6T4-8003 (LOC3281) Condition:New
$600 USDLansing, MI - Trusted Seller
Parlec #6 - 1.625" Straight Shank Tapping Chuck 1.5" Shank S15-77TA5 (LOC2308A)
new
- Manufacturer: Parlec
Parlec #6 - 1.625" Straight Shank Tapping Chuck 1.5" Shank S15-77TA5 (LOC2308A) Condition:New
$750 USDLansing, MI - Trusted Seller
1990 HARTFORD #30/40-180
used
- Manufacturer: Hartford
Capacity: 5/16" thru 5/8" Diameter | Maximum thread length: to 4-1/2" (at max Dia. 2") | Maximum shank length: 6" | Production rate: 90 to 180 PPM Standard #30 | Die pocket depth: 4-5/8" | Approx. floor size: 7...
Ivyland, PA - Trusted Seller
HARTFORD 312
used
- Manufacturer: Hartford
- Model: 312
Production: 33 - 150PPM | Screw diameter capacity: No. 6 ( .138 ) through 5/16" | Thread length capacity: 1/8" - 2-1/2" | Approx. floor size: 4' x 6' | Approx. weight: 4,750 lbs. | Die pocket depth: 2-5/8" | Equ...
Ivyland, PA 
2012 PEE-WEE P20.8G CNC AC
used
- Manufacturer: PEE WEE
22 TON PEE-WEE "P20.8G CNC AC" FULLY-AUTOMATED COLD-FORMING THREAD ROLLER New 2012, Installed 2014, Serial No P11.0122, Model P20.8G CNC-AC EQUIPPED WITH: Siemens "Simatic" Mobile Panel CNC Controller HJ3 Automat...
- Trusted Seller
Collins 44A #8526
used
- Manufacturer: Collins
Collins 4″ Thread-O-Matic Pipe Threading Machine, 44A Inventory # 8526 1/2 – 3/4 2 1/2 – 3 3 1/2 – 4
Tapmatic Drill-n-Tap 50 W 1/2" 20 Thread
new
- Manufacturer: Tapmatic
Self-Reversing tapping attachment for drilling and tapping with high-speed reverse, pre-selective torque control and quick change. Now you can center drill, drill and tap on your conventional drill press or milli...
$1,295 USDLebanon, NJ- Trusted Seller
Lassy 12F Thread Tapping Machine with Tooling
used
- Manufacturer: Lassy
This is a Lassy Thread Tapping Machine with Tooling - Model # 12-F PTWS - 01282023-LR-10 R020725 Picture# 12162022 * All information deemed accurate but may vary from model to model. Contact Larry for any q...
$325 USDCentral Falls, RI - Trusted Seller
Alto, MI - Trusted Seller
Ridgid 535 Pipe Threader, 1/8” – 2” Capacity
used
- Manufacturer: Ridgid
Description Ridgid Model 535 Pipe Threader, 1/8” – 2” Capacity Serial # 673124 Asset # 13475 Specifications: Capacity 1/8” to 2” pipe 1/4” to 2” bolt Volts 115 Amps 8 amps Phase Single Phase HP 1/2 HP Approximate...
Alto, MI 
Prutton 75A-24 Threading & Tapping
used
- Manufacturer: Prutton
- Model: 75A-24
Good condition Prutton 75A-24 Threading & Tappings. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
