RAMS 8′ 20 Gauge Sheet Metal Brake
- Manufacturer: Rams
The RAMS-SB Series 8 ft Sheet Metal Brake is constructed with both upper and lower heavy duty tie rods that are tig welded. The all steel craftsmanship ensures a lifetime of fast and precise bends. RAMS brakes in...
Sutton, MA
RAMS 8′ 16 Gauge Sheet Metal Brake
- Manufacturer: Rams
The RAMS-SB Series Sheet Metal Brakes are constructed with both upper and lower heavy duty tie rods that are tig welded. This robust all steel craftsmanship ensures a lifetime of fast and precise bends. All RAMS ...
Sutton, MA
RAMS 8′ 22 Gauge Sheet Metal Brake
- Manufacturer: Rams
The RAMS-HB series Sheet Metal Brakes are simply unparalleled in performance. The RAMS-0822-HB Hand Brake is 100% made in the USA. They are backed with a 2 year warranty.
Sutton, MA
RAMS 10′ 16 Gauge Sheet Metal Brake
- Manufacturer: Rams
Capacity mild steel: 16 Gauge | Max bending length: 122″ | bending angle: 0-135 Degrees | Max lift of beam: 1 7/8″ | Front to rear beam adjustment: 1 1/2″ | Min reverse bend: 1/2″ | Min flange capacity: 3/4″ | ...
Sutton, MA- Trusted Seller
RAMS RAMS-2006 #84386
- Manufacturer: Rams
- Model: -2006
FEATURES: This unit comes with a 1 HP electric motor, 110-115V single phase. We use Torrington Needle Bearings and hardened steel components throughout, (62 Rockwell). The cabinet is heavy gauge steel with a Hamm...
Ames, IA - Trusted Seller
RAMS RAMS-2006
- Manufacturer: Rams
- Model: -2006
RAMS 20-gauge Pittsburgh Machine The unit comes with a 1 H.P. electric motor, 115/208-230V, 1,725 RPM. Auxiliary outboard shafts will accommodate optional rolls to form Pipe Lock, Drive Cleats or Right Angle Flan...
Kent, WA - Trusted Seller
RAMS RAMS 24-28
- Manufacturer: Rams
The unit comes with a 1/2 H.P. electric motor, 115/208-230V, 5.4 AMPS 60 cycle single phase. RAMS uses Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet and optional s...
$3,795 USDKent, WA - Trusted Seller
$750 USDKent, WA - Trusted Seller
DRIVE CLEAT NOTCHER RAMS 20 GA
- Manufacturer: Rams
Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades. Blades can be flipped over to use other side. MADE IN THE USA!...
McClellan Park, CA 
RAMS Duct Beader Model RAMS-2060-DB
- Manufacturer: Rams
RAMS Duct Beader MODEL RAMS-2060-DB Capacity: 20 Gauge Mild Steel | Bead increments: 12" Center | Motor drive: Chain Driven | Approx speed: 30 FPM | Motor: 115V/ Single Phase | Shipping dimensions: 80 x 43 x 34 ...
RAMS-2014 Auxiliary Machine
- Manufacturer: Rams
Capacity: 20 GA. MAX. – 28 GA. MIN. MILD STEEL | Approx. speed: 40 FPM | Dimensions: 63" LONG x 26" WIDE x 34" HIGH | Approx. weight: 600 LBS
RAMS 2428 Pittsburgh Machine
- Manufacturer: Rams
Capacity: 24 GA. MAX. – 28 GA. MIN. MILD STEEL | Approx. speed: 35 FPM | Dimensions: 36" LONG x 16" WIDE x 34" HIGH | Approx. weight: 125 LBS
$4,250 USDReno, NV
RAMS-2013 S & Drive Machine
- Manufacturer: Rams
Capacity: 24 GA MAX on S Cleat - MILD STEEL22 GA MAX on Drive Cleat - MILD STEEL | Approx. speed: 30 FPM | Dimensions: 44" LONG x 18" WIDE x 34" HIGH | Approx. weight: 500 LBS
RAMS-2006 20ga Pittsburgh Machine
- Manufacturer: Rams
Capacity: 20 GA. MAX. – 26 GA. MIN. MILD STEEL | Approx. speed: 25 FPM | Dimensions: 36" LONG x 17.5" WIDE x 34" HIGH | Approx. weight: 350 LBS
RAMS 1860-DB 60" 18 Gauge Duct Beader
- Manufacturer: Rams
RAMS Duct Beader MODEL RAMS-1860-DB Capacity: 18 Gauge Mild Steel 60" Wide | Bead increments: 12" Center | Motor drive: Chain Driven | Approx speed: 30 FPM | Motor: 115V/ Single Phase | Shipping dimensions: 80 x...
Tip: Enter manufacturer, model or keyword