Building Filters

Used weight

RAMS 8′ 20 Gauge Sheet Metal Brake
- Manufacturer: Rams
The RAMS-SB Series 8 ft Sheet Metal Brake is constructed with both upper and lower heavy duty tie rods that are tig welded. The all steel craftsmanship ensures a lifetime of fast and precise bends. RAMS brakes in...
Sutton, MA
RAMS 10′ 16 Gauge Sheet Metal Brake
- Manufacturer: Rams
Capacity mild steel: 16 Gauge | Max bending length: 122″ | bending angle: 0-135 Degrees | Max lift of beam: 1 7/8″ | Front to rear beam adjustment: 1 1/2″ | Min reverse bend: 1/2″ | Min flange capacity: 3/4″ | ...
Sutton, MA
Trusted Seller
RAMS RAMS-2006 #84386
- Manufacturer: Rams
- Model: -2006
FEATURES: This unit comes with a 1 HP electric motor, 110-115V single phase. We use Torrington Needle Bearings and hardened steel components throughout, (62 Rockwell). The cabinet is heavy gauge steel with a Hamm...
Ames, IA
RAMS 8′ 22 Gauge Sheet Metal Brake
- Manufacturer: Rams
The RAMS-HB series Sheet Metal Brakes are simply unparalleled in performance. The RAMS-0822-HB Hand Brake is 100% made in the USA. They are backed with a 2 year warranty.
Sutton, MA
Trusted Seller
RAMS RAMS-2006
- Manufacturer: Rams
- Model: -2006
RAMS 20-gauge Pittsburgh Machine The unit comes with a 1 H.P. electric motor, 115/208-230V, 1,725 RPM. Auxiliary outboard shafts will accommodate optional rolls to form Pipe Lock, Drive Cleats or Right Angle Flan...
Kent, WA
Trusted Seller
DRIVE CLEAT NOTCHER RAMS 20 GA
- Manufacturer: Rams
Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades. Blades can be flipped over to use other side. MADE IN THE USA!...
McClellan Park, CA
RAMS 8′ 16 Gauge Sheet Metal Brake
- Manufacturer: Rams
The RAMS-SB Series Sheet Metal Brakes are constructed with both upper and lower heavy duty tie rods that are tig welded. This robust all steel craftsmanship ensures a lifetime of fast and precise bends. All RAMS ...
Sutton, MA
Trusted Seller
RAMS RAMS 24-28
- Manufacturer: Rams
The unit comes with a 1/2 H.P. electric motor, 115/208-230V, 5.4 AMPS 60 cycle single phase. RAMS uses Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet and optional s...
$3,795 USD
Kent, WA
RAMS-2002 20ga Hand Flanger
- Manufacturer: Rams
Capacity: 20 GA. MILD STEEL | Dimensions: 7" LONG x 11" WIDE x 26" HIGH | Approx. weight: 20 LBS
$795 USD
Reno, NV
RAMS-2005 24 Inch 20ga Cheek Bender
- Manufacturer: Rams
Adjusts for 1/4" to 7/8" bends. Capacity: 20 GA. MILD STEEL | Dimensions: 31" LONG x 12" WIDE x 4" HIGH | Approx. weight: 70 LBS
$1,295 USD
Reno, NV
RAMS-2004 24 Inch 20ga Cleat Bender
- Manufacturer: Rams
Capacity: 20 GA. MILD STEEL | Dimensions: 31" LONG x 9" WIDE x 9" HIGH | Approx. weight: 70 LBS
$1,045 USD
Reno, NV
RAMS-2001 20ga Drive Cleat Notcher
- Manufacturer: Rams
Capacity: 20 GA. MILD STEEL | Dimensions: 22" LONG x 4" WIDE x 11" HIGH | Approx. weight: 20 LBS
$525 USD
Reno, NV
RAMS-2007 20ga Stand Alone Power Flanger
- Manufacturer: Rams
Capacity: 20 GA. MAX. – 24 GA. MIN. MILD STEEL | Dimensions: 36" LONG x 17-1/2" WIDE x 34" HIGH | Approx. weight: 204 LBS
$4,200 USD
Reno, NV
RAMS-2014 Auxiliary Machine
- Manufacturer: Rams
Capacity: 20 GA. MAX. – 28 GA. MIN. MILD STEEL | Approx. speed: 40 FPM | Dimensions: 63" LONG x 26" WIDE x 34" HIGH | Approx. weight: 600 LBS
$11,900 USD
Get financing
Est. $234/mo
Reno, NV
RAMS 2428 Pittsburgh Machine
- Manufacturer: Rams
Capacity: 24 GA. MAX. – 28 GA. MIN. MILD STEEL | Approx. speed: 35 FPM | Dimensions: 36" LONG x 16" WIDE x 34" HIGH | Approx. weight: 125 LBS
$4,250 USD
Reno, NV