Used Reed in USA

1998 Reed 150

• Manufacturer: Reed

1998 REED 150 TOPSOIL SCREENER, NEW BEARINGS, NEW SPRINGS, NEW TIRES, NEE PARTS, 3/4” BOTTOM DECK, 3” TOP DECK, STRONG MACHINE READY TO WORK

Sartorius Reed BioWelder TC Automated Sterile Tube Welding for Total Containment

• Manufacturer: Reed
• Model: BIOWELDER TC

“Tested and working Sartorius Reed BioWelder TC automated sterile tube welder with tube holders, SD card, and power cable, backed by 90-day warranty. Blade must be acquired separately.” You Will Receive: - Sartor...

Wave Biotech Reed STF IR Sterile Tube Fuser Welder F8555

• Manufacturer: Reed

“For parts or repair Wave Biotech Reed STF IR sterile tube fuser F8555. Tube holders and blades are not included and must be acquired separately.” You Will Receive: - Wave Biotech Reed STF IR Sterile Tube Fuser W...

5’ x 1/4” REED/WEBB “605” INITIAL PINCH PLATE BENDING ROLL

• Manufacturer: Reed

5' X 1/4" REED/WEBB “605” INITIAL-PINCH PLATE BENDING ROLL - (3) Driven Rolls - Manual Drop End - 6" Diameter Rolls Imperial Metric 5’ x 1/4” REED WEB “605” INITIAL-TYPE PLATE BENDING ROLL Model 605 Equipped With...

Sartorius Reed BioWelder Sterile Tube Fuser and SH1 15.9mm Tube Hose Holders

• Manufacturer: Reed

“Tested and working Sartorius Reed BioWelder sterile tube fuser with SH1 OD 5/8”(15.9mm) tube holders and power cable, backed by 90-day warranty. Blade must be acquired separately.” You Will Receive: - Sartorius ...

2021 Reed B-50

• Manufacturer: Reed
• Model: B50
• Horsepower: 110 hp
• Hours: 1,800 h

PUMP NOTES: Ready to work. One owner, dealer serviced. New: wear parts & carbide wear plate. Overall Condition: Good. Make an offer!

NORGREN Reed Switch M/50/LSU/2V

• Manufacturer: Reed

New 30 day warranty Wr31 Bin3 Mpn: M/50/LSU/2V | Ideal reference number: 103806 | Make: NORGREN

REED D44EH

• Manufacturer: Reed
• Model: D44EH

Spindle diameter: 1.58" | Thread/form diameter (in-feed): 1-1/2" (40mm) | Thread/form diameter (thru-feed): 5/8" (16mm) | Thread/form length (in-feed): Up to 3" (80mm) | Thread/form length (thru-feed): 20 Ft (6m...

Reed Sidewinder Oven

• Manufacturer: Reed

Sidewinder – 12 Pan Model 6/12 Serial R9244 100,000BTU Nat. Gas 115V 81″W x 53″D x 87-1/2″H Very Nice Condition Professionally Un-Installed

Reed Planetary Thread Rolling Machine with Bowl Feeder - Brockton Plant Location

• Manufacturer: Reed

Reed Planetary Thread Rolling Machine with Bowl Feeder is 22" diamter CCW- Model 300-A-VB - Bowl Feeder model 1241-104 **Please Note: This item is located at 4159 Brockton Dr. SE, Kentwood, MI 49512

Reed 15-5×3

• Manufacturer: Reed

Reed Proof Box, Model 15-5×3. Box to hold a total of 30 Racks each measuring approximately 28″x36″. Racks to be arranged five racks wide by 6 racks deep. Box to be furnished with five doors on each side of box fo...

Reed 21-7×3

• Manufacturer: Reed

Box to hold a total of 21 oven racks each having a depth of 65″. Racks to be arranged 7 rack wide by 3 racks deep. Seven doors to be furnished on each side of the box for pass thru operation. All panels, both int...

Reed 9-3-3-

• Manufacturer: Reed

Reed 21-7×3

• Manufacturer: Reed

Box to hold a total of 42 racks. each measuring 26″x36″. Racks arranged seven racks wide by six racks deep. Seven doors furnished on each side of box or pass through operation. Box measures 22′-9″ Left to Right. ...