Used Boring, Dowel Inserting, Gluing

Trusted Seller
1993 Biesse "Techno Logic" Feed-thru Borer
- used
- Manufacturer: Biesse
- Model: Techno
Biesse "Techno Logic" Feed-thru Borer Feed-Thru boring machine with 3,200 x 640 x65 mm (125.9" L x 25.2" W x 2.6"H) maximum working capacity; 205 x 50 x 10 mm (8" L x 1.9" W x 0.39" H) minimum working capacity. A...
Tiffin, OH
Trusted Seller
1994 Biesse "Techno Logic" Feed-thru Borer
- used
- Manufacturer: Biesse
- Model: Techno
Biesse "Techno Logic" Feed-thru Borer Feed-Thru boring machine with 3,200 x 640 x65 mm (125.9" L x 25.2" W x 2.6"H) maximum working capacity; 205 x 50 x 10 mm (8" L x 1.9" W x 0.39" H) minimum working capacity. A...
Tiffin, OH
Trusted Seller
Weeke Optimat ABD050 Boring and Dowel Insertion Machine - 2013! Stock #2251
- used
- Manufacturer: Homag - Weeke
Tolerances required for wooden dowels: Supported workpiece length (min/max): 20 / 1250 mm (0.79"/ 49.2") Workpiece width (min/max) | Vertical drilling thickness (min/max): 10 / 30mm (0.39" / 1.25") | Horizontal ...
Hughesville, PA
Trusted Seller
1994 Biesse "Techno Logic" Feed-thru Borer
- used
- Manufacturer: Biesse
- Model: Techno
Biesse "Techno Logic" Feed-thru Borer Feed-Thru boring machine with 3,200 x 640 x65 mm (125.9" L x 25.2" W x 2.6"H) maximum working capacity; 205 x 50 x 10 mm (8" L x 1.9" W x 0.39" H) minimum working capacity. A...
Tiffin, OH
Trusted Seller
2002 Biesse "Techno Logic" Feed-thru Borer
- used
- Manufacturer: Biesse
- Model: Techno
Biesse "Techno Logic" Feed-thru Borer Feed-Thru boring machine with 3,200 x 640 x65 mm (125.9" L x 25.2" W x 2.6"H) maximum working capacity; 205 x 50 x 10 mm (8" L x 1.9" W x 0.39" H) minimum working capacity. A...
Tiffin, OH
Trusted Seller
Harlan/Creative Automation Complete Laminating Line
- used
- Manufacturer: Harlan
Harlan/Creative Automation Complete Laminating Line Powered infeed rolls Panel turner (2) Powered case roll decks Hoist & Alignment station Canted infeed powered rollers Panel cleaner Glue spreader unwinder Board...
Tiffin, OH
Trusted Seller
Nordson "Problue 30" Hot Melt Glue Applicator
- used
- Manufacturer: Nordson
- Model: PROBLUE 30
Nordson "Problue 30" Hot Melt Glue Applicator Phase: 3 PHASE | Voltage: 230 VOLT | Load out period: September 26 - October 9, 2025 By Appointment ONLY! | Estimated dimensions: 60" x 36" x 60" | Estimated weight: ...
Tiffin, OH
Trusted Seller
Nordson "Problue 30" Hot Melt Glue Applicator
- used
- Manufacturer: Nordson
- Model: PROBLUE 30
Nordson "Problue 30" Hot Melt Glue Applicator Phase: 3 PHASE | Voltage: 230 VOLT | Load out period: September 26 - October 9, 2025 By Appointment ONLY! | Estimated dimensions: 60" x 36" x 60" | Estimated weight: ...
Tiffin, OH
Trusted Seller
Nordson "Problue 30" Hot Melt Glue Applicator
- used
- Manufacturer: Nordson
- Model: PROBLUE 30
Nordson "Problue 30" Hot Melt Glue Applicator Phase: 3 PHASE | Voltage: 230 VOLT | Load out period: September 26 - October 9, 2025 By Appointment ONLY! | Estimated dimensions: 60" x 36" x 60" | Estimated weight: ...
Tiffin, OH
Trusted Seller
1999 Biesse "Techno Logic" Feed-thru Borer
- used
- Manufacturer: Biesse
- Model: Techno
Biesse "Techno Logic" Feed-thru Borer Phase: 3 PHASE | Voltage: 440 Volts | Load out period: September 25 - October 9, 2025 By Appointment ONLY! | Estimated dimensions: 19'L x 7'W x 7'H | Estimated weight: 9,000 ...
Tiffin, OH
Trusted Seller
KOCH SBD-8,TRIM, BORE AND DOWEL INSERTING MACHINE
- used
- Manufacturer: Koch
- Model: SBD
KOCH SBD-8,TRIM, BORE AND DOWEL INSERTING MACHINE S/N:8403/3395, (1984), (440/60/3 electrics), H-1761 Standard Specifications: - 10” min. & ~ 100” max. work-piece capacity - (2) vertical boring units - (2 ) ...
Hickory, NC
Trusted Seller
BELL 424-AC TRIM, BORE, AND DOWEL MACHINE
- used
- Manufacturer: Bell
BELL 424 TRIM, BORE, & DOWEL MACHINE S/N:, NA, S-4819 Standard Specifications: * Inquire for additional specifications *
Hickory, NC
Trusted Seller
Evans Royal Double Spindle Pocket Hole Drill
- used
- Manufacturer: Evans
Name: Double Spindle Pocket Hole Drill | Arrival date: 09-05-2025 | Dimensions l x w x h (inches): 25 x 57 x 42 | Weight (lb.): 345 | Available quantity: 1
$350 USD
Euclid, OH
Trusted Seller
Doucet MDL SRH-1 Clamp Carrier
- used
- Manufacturer: Doucet
DOUCET CLAMP CARRIER 30 SECT X 8 FT 6 IN WIDE (200+) 36" CLAMPS MODEL SRH-1 SX30- 8.5-240-36 SN 87-10-28 Includes: HYD PWR PACK, PANEL FLATTENER Dismantled and ready to load!
USA
Trusted Seller
2008 Gannomat 470TB Drill and Dowel
- used
- Manufacturer: Gannomat
Gannomat Drill and Dowel Machine - Model: 470TB - Serial Number: 306882 - Year of Manufacture: 2008 - With CNC Control
$15,000 USD
Get financing
Est. $295/mo
Milwaukee, WI
Koch SBD-B Boring, Dowel inserting, Gluing
- used
- Manufacturer: Koch
- Model: SBD-B
Good condition Koch SBD-B Boring, Dowel inserting, Gluings manufactured in 2005. Located in Germany and other countries. Click request price for more information.
Germany