Used Processing in Florida, USA

Used Poly Processing approximately 8,000 gallon poly tank

• Manufacturer: Poly Processing

Used Poly Processing approximately 8,000 gallon poly tank. 10'-6" diameter X 15' high straight side. Dished top, flat bottom. Covered with white foam sprayed insulation. Top fittings: 24" manway, (1) 2" and (1) 6...

6" x 6" x 13/16"AKYAPAK AKD 160 ANGLE PROCESSING LINE

• Manufacturer: Akyapak

▪ AKD 160 ANGLE PROCESSING LINE ▪ Punching Unit – 2 units, 3 punching tools per unit ▪ Marking Unit – 8 cartridges, 8 letters and numbers per cartridge ▪ Shearing Unit – 275 ton hydraulic piston ▪ Infeed syst...

Mu 80 Tone Generator

Mu 80 Tone Generator 8 ¼” x 8 ½” x 1 ½” Yamaha Sold as is

Mu 15 Tone Generator

Mu 15 Tone Generator 4” x 7 ½” x 1 ½” Yamaha Sold as is

Mu 5 Tone Generator

Mu 5 Tone Generator 4” x 7 ½” x 1 ½” Yamaha Sold as is

PURA DYN 02-00244B

• Manufacturer: PURA DYN

** AN APPOINTMENT IS REQUIRED BEFORE PICK-UP. WE ARE CLOSED ON FRIDAYS.** (4) PURA DYN FILTERS. MODEL: 02-00244B. ALL UNUSED AND KEPT IN STORAGE. SOLD AS SHOWN. SEE PHOTOS. DECAL: NONE.

OIL CONTAINER

Used oil container, 500 gallons Lot type: Online Auction | Inventory id: Oil

Traulsen Blast Chill Freezer

• Manufacturer: TRAULSEN

Traulsen Blast Chill Freezer - Model RBC100-ZKR02 serial#T157943C11 - Single phase, 208 volts - Type 404A freon

chiller 100 ton , trane screw

• Manufacturer: Trane

chiller trane 100 ton. MODEL: RTAA1004YT01A300 VOLTS 460 3PH 60 HZ 2 COMPRESSOR SCREW. TYPE OF USE OUTDOOR VOLT UTIL RANGE 414-506 COMPRESSORS 460 VOLTS 60 HZ 3PH RLA 84 LRA 137 MAS FUSE OR BRKR 250 -- REAL DUAL...

Epson LS6-602S Industrial Robot, RC90-B Controller, 860mm Reach

• Manufacturer: Epson

Epson LS6-602S Industrial Robot, equipped with an RC90-B Controller, AC220-240V power supply, maximum reach of 860mm, max payload of 6kg, power consumption of 2500W, single phase, 200V, 10A, certification include...

Epson Industrial Robot with RC90-B Controller, 600 mm Reach

• Manufacturer: Epson

Epson Industrial Robot with RC90-B Controller, featuring a 600 mm reach, 4 axes, payload capacity of 5 kg (11 lbs), repeatability of mm, power supply requirements of 120V AC, weight of 48 lbs (21.8 kg), Controlle...

Epson LS6-602S Industrial Robot Arm, 4-Axis, 6 kg Payload, RC90 Controller

• Manufacturer: Epson
• Model: LS6-602S

Epson LS6-602S Industrial Robot Arm, 4-Axis, 6 kg Payload, RC90 Controller, Manufacture Date: 12/2012, Power Supply: 200VAC 3 PHASE, Serial Number: L9A005187 Category : Industrial Robot Arm Make : Epson Model : L...

2019 Epson LS6-602S Industrial Robot Arm

• Manufacturer: Epson
• Model: LS6-602S

Epson LS6-602S Industrial Robot Arm, 6kg Payload, 4 Axes, 220V, Manufactured Date: 07/2019, Power Consumption: Axis 1: 200W, Axis 2: 200W, Axis 3: 100W, Axis 4: 100W, Weight: Approximately 44 lbs (20 kg), Communi...

Epson C4-A901S Industrial Robot Arm, 4kg Payload, RC700-A Controller

• Manufacturer: Epson
• Model: RC700-A

Epson C4-A901S Industrial Robot Arm, 6 axes, repeatability mm, reach 23.6 inches (600 mm), power supply AC90-264V 50/60Hz, communication interfaces Ethernet USB RS-232C, mounting options Floor Ceiling, operating ...

Epson C4-A901S Industrial Robotic Arm, 6-Axis, RC700-A Controller, 2020

• Manufacturer: Epson
• Model: RC700-A

Epson C4-A901S Industrial Robotic Arm, 6-Axis, 8.8 lbs (4 kg) Maximum Payload, 35.4 in (900 mm) Reach, mm Repeatability, 200-230 VAC Power Supply, IP54 Rating, Floor/Ceiling/Wall Mounting Options, Serial Number: ...