- Trusted Seller
RÖHM four-jaw chuck
- Manufacturer: Röhm
Additional information Used four-jaw chuck with bore recess Accessories Chuck flange, short taper size 6, 1 set of stepped jaws Further information
Wiesbaden, Germany - Trusted Seller
RÖHM three-jaw chuck
- Manufacturer: Röhm
Add-on Used three-jaw chuck with spiral ring and centrically clamping and individually adjustable reversible jaws, cast iron body Further information
Wiesbaden, Germany - Trusted Seller
RÖHM three-jaw chuck
- Manufacturer: Röhm
Additional Used three-jaw chuck Chuck flange with Morse taper for mounting in the tailstock or hollow spindle
Wiesbaden, Germany - Trusted SellerAuction
Wissen, GermanyVisit Auction Website - Trusted Seller
Röhm 500
- Manufacturer: Röhm
Includes 1 set of reversing claws. 3-klauwplaat: 0 mm ø | 4-claw: 500 | Through: 138 mm ø | Pitch bolt holes (width): 120 mm
Etten-Leur, Netherlands - Trusted Seller
Revolving center points 3 pieces from Röhm / – MK5 110HVL MK5 35829
- Manufacturer: Röhm
rotating point, rotating center point, rotating Morse taper, rotating center point, rotating lathe point, center point, centering taper
Wiefelstede, Germany - Trusted Seller
Power chuck hydraulically from Röhm - KFH-140 20777
- Manufacturer: Röhm
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Short taper
Wiefelstede, Germany - Trusted Seller
Roofing flange from Röhm - diameter 220 mm 16796
- Manufacturer: Röhm
Turning heart Driver, center turning device Outside: Ø 220 | Cone: Ø 106 mm | Short taper: 6 | Hole circle: Ø 133 mm | Mass: 6,4 | Internal storage: 3A10401
Wiefelstede, Germany - Trusted Seller
Etten-Leur, Netherlands - Trusted Seller
Röhm verschiedene
- Manufacturer: Röhm
Vise RÖHM with hydraulic clamping Clamping stroke max. 60mm, clamping width max. 150mm;jaw width 110mm; hydraulic connection Ø 13,5mm each 2x The jaws are equipped with prismatic clamping and with cylindrical sha...
Leipzig, Germany - Trusted Seller
Four-jaw chuck from Röhm – Ø 160 mm 36431
- Manufacturer: Röhm
four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 160 mm | Passage: Ø 40 mm | Hole circle: Ø 62 mm | Admission: Short taper 5 / cone 79 – 82 mm | Accessories: incl. 2nd set of...
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck from Röhm - diameter 125 mm 20424
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 125 mm | Without: Interchangeable jaws | Passage: Ø 32 mm | Number: 1x chuck available | Mass: 5,4 | Internal storage: 3A20304
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck by Röhm - diameter 240 mm 19528
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Feed size: 240 mm | Mounting flange: M80 x 6 mm | Without: Interchangeable jaws | Mass: 26 | Dimensions: Ø240 mm | Internal storage: MA10632
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck by Röhm - diameter 200 mm 20887
- Manufacturer: Röhm
three-jaw chuck, three-jaw lathe chuck -change jaws
Wiefelstede, Germany - Trusted Seller
Three-jaw chuck from Röhm - Ø 160 mm 31821
- Manufacturer: Röhm
Three-jaw chuck, three-jaw lathe chuck Manufacturer: Röhm, three-jaw chuck size Ø 160 mm | Passage: Ø 42 mm | Hole circle: Ø 133 mm | Admission: Short cone 6 / cone 103 - 105 mm | Mass: 10,5
Wiefelstede, Germany
Tip: Enter manufacturer, model or keyword