ROMI I-40A
- Manufacturer: Romi
- Model: I40
Tip height: 325 mm | Distance between points: 1.000 mm | Permissible diameter on the busbar: 650 mm | Admissible diameter over the cross slide: 450 mm | Cross car course: 280 mm | Tool-carrier machine course: 15...
Limeira - State of São Paulo, Brazil
2000 ROMI TORMAX 30
- Manufacturer: Romi
- Model: Tormax 30
Height between tips: 205 mm | Distance between ends: 1.500 mm | Permissible diameter on the busbar: 420 mm | Admissible diameter over the table wings: 370 mm | Admissible diameter over the cross slide: 230 mm | ...
Limeira - State of São Paulo, Brazil
2001 Romi Discovery 760
- Manufacturer: Romi
- Model: Discovery 760
Command: Siemens | Conical seat: ISO40 | Speed range: 7.500 rpm | Fast forwarding of the x and y axes: 30 m/min | Z axis fast forward: 20 m/min | Programmable cutting feed: 1 to 15 m/min | Upper table stroke (x-...
Limeira - State of São Paulo, Brazil
ROMI TP-100 / 6,000 mm
- Manufacturer: Romi
Distance between ends: 6.000 mm | Diameter over the bus: 1.300 mm | Diameter over the carriage cross: 1.000 mm | Allowable weight between centers with two micrometers: 30.000 kg | Main engine power: 100 hp
Limeira - State of São Paulo, Brazil
2001 ROMI DISCOVERY 560
- Manufacturer: Romi
- Model: Discovery 560
Command: Siemens | Nose cone: ISO40 | Speed range: 7.500 rpm | Rapid traverse in x, y and z: 30/30/20 m/min | Programmable cutting feed: 1 to 15 m/min | Longitudinal travel (x-axis): 560 mm | Transverse travel (...
Limeira - State of São Paulo, Brazil
2012 ROMI CENTUR 80A
- Manufacturer: Romi
- Model: Centur 80A
- Spindle bore: 305 mm
- spindle head: Driven by an AC motor through pulleys and V-belt, it features continuous speed variation. The spindle shaft is supported by high-precision bearing housings with permanent lubrication. | - bedway:...
Limeira - State of São Paulo, Brazil
ROMI DISCOVERY 1000
- Manufacturer: Romi
- Model: Discovery
Command: fanuc | Conical seat: ISO40 | Speed range: 6.000 rpm | Fast forwarding of the x and y axes: 30 m/min | Z axis fast forward: 20 m/min | Programmable cutting feed: 1 to 15 m/min | Upper table stroke (x-ax...
Limeira - State of São Paulo, Brazil
LATHE ROMI EH-40
- Manufacturer: Romi
- Model: EH40
No comments have been posted for this product, be the first! Comment TECHNICAL INFORMATION: - Whitworth threads: 42 - ½ fpp GENERAL MEASUREMENTS:
São Paulo, Brazil
Lathe Romi ID-20
- Manufacturer: Romi
Lathe Romi ID-20 Lathe Romi ID-20 With 1500mm between ends; 360mm diameter over the busbar; 225mm bus width; Head rpm range: from 50 to 3000RPM; Main engine: 5 HP. Machine in perfect conditions of use and operation:
Joinville - State of Santa Catarina, Brazil2006 ROMI 1000 CNC Machining Center
- Manufacturer: Romi
ROMI 1000 CNC Machining Center Chip conveyor Vertical spindle head Distance from spindle nose to table: 110 ~ 750 T x Distance slot widths: 18 x 80 mm Automatic tool changer Tool magazine capacity: 22 tools Maxim...
2013 CNC lathe brand Romi GL240 (Dia x Length) 300 x 400 mm
- Manufacturer: Romi
- Model: GL240
CNC lathe brand Romi model GL240 Allowable diameter over the busbar 420 mm Maximum turnable diameter 300 mm Maximum turnable length 400 mm Nose A2-5 Hydraulic Plate 165 mm Bar capacity 51 mm Mitsubishi M70 remote...
2000 Romi Discovery 560 Machining Center (XYZ) 560 x 406 x 508 mm
- Manufacturer: Romi
- Model: Discovery 560
Romi brand machining center Discovery 560 model Year 2000 Siemens command BT-40 Cone 6000RPM Axis travel (XYZ) 560 x 406 x 508 mm Distance between tree nose and table 125 to 633 mm Table size 840 x 360 mm Maximum...
CNC lathe brand Romi model Galaxy
- Manufacturer: Romi
- Model: Galaxy
Romi brand CNC lathe Galaxy model chip conveyor This machine is off-line and will be sold off-line. It was working normally. A component is missing from the panel, which has already been found to be economical to...
1995 Machining Center Romi Discovery 308 (XYZ) 450 x 310 x 410 mm
- Manufacturer: Romi
- Model: Discovery 308
Romi Machining Center Model Discovery 308 Year 1995 Axis strokes (XYZ) 450 x 310 x 410 mm Distance between tree nose and table: 120 to 530 m Table 425 x 1,060 mm Working area 360 x 840 mm Width of grooves x dista...
Tip: Enter manufacturer, model or keyword
