Used Wire Machinery

RMG 34-0284-01

• used

• Manufacturer: RMG

Diameter (high carbon steel): .187" (4.7mm) | Maximum production: 84 FPM | Electrics: 460V 3 PH 60 HZ | Hp: 2HP | Approx. floor size: 33" x 33" x 50"H | Approximate weight: 950 lbs

DIACRO #2

• used

• Manufacturer: Di-Acro

Maximum radius without quik-lok: 9" | Maximum radius with quik-lok: 7" | Height of standard forming nose: 1" | Operating leverage: 29" | Round mild steel bar capacity: 1/2" | Square mild steel bar capacity: 3/8"...

Penn 8B

• used

• Manufacturer: Penn

Max wire diameter: 5/16" | Equipped with: Reeves Variable Speed Drive

LUBOW WBR-1

• used

• Manufacturer: Lubow
• Model: WBR-1

Capacity: 1/2" 1 Piece | Table size: 24" x 72" | Adjustable bend angle: 0 - 135 Degree | Equipped with: With Automatic Turret and One Adjustable Die For All Wire Sizes

FASTENER ENGINEERS DTVA-0220-S

• used

• Manufacturer: Fastener Engineers

Capstan diameter: 20" | Maximum wire diameter: .250" | Speed range: up to 90 FPM | Approx. weight: 1300 lbs | Approx. floor size: 50" x 39" x 52" H

LUBOW WBR-1

• used

• Manufacturer: Lubow
• Model: WBR-1

Capacity: 1/2" 1 Piece | Table size: 24" x 72" | Adjustable bend angle: 0 - 135 Degree | Equipped with: Automatic Turret, 1 Adjustable Die For All Wire Sizes

LUBOW ML 6

• used

• Manufacturer: Lubow

Capacity: 3 Pieces 5/16" Round Wire | Rotation: 400 Degees | Rotating disc: 6" | Table size: 24" x 60" | Approx. weight: 700 LBS | Equipped with: Foot Pedal

OMCG 630

• used

• Manufacturer: OMCG

Mechanical feeding: from 0 up to 24.8" (630mm) | Wire diameter range: 0.315" (8mm) | Strip width: 1" (25mm) | Maximum strip thickness: 0.08" (2mm) | Approx. weight: 4500 lbs | Approx. floor size: 144" x 47" x 7...

LUBOW DWB 2

• used

• Manufacturer: Lubow

Rotation: 225 DEG | Max distance between bends: 3' | Minimum distance between bends: 4 1/2" | Equipped with: Bending Angles Independent in Each HeadSolid Center Post

Pneumatic Bender

• used

LUBOW ML 6

• used

• Manufacturer: Lubow

Capacity: 3 Pieces 5/16" Diameter | Rotation: 400 Degrees | Rotating disc: 6" | Number of stops: 8 | Table size: 2' x 5' | Approx. weight: 650 LBS | Equipped with: Air OperatedFoot Pedal

Renco 16" Drawing Deadblock Model 16DB30VF

• used

Finish block diameter: 16" | Motor: 30 HP | Electrics: 480V/3/60 | Dimensions: 60" W x 84" L x 84" H | Equipped with: Control Techniques Commander CDE Model CDE30HPICD AC Drive

1990 MACBEE 4HFMEL

• used

• Manufacturer: Macbee

Number of blocks: 4 | Diameter of blocks: 13" | Motors: 3 HP | Speed range: 0 - 600 FPM | Electrics: 240V/60Hz/3 Phase | Equipped with: Siemens Simoreg DC Drives Oil Cooled Die BoxesSpoolerIncludes 4 Integrated ...

1990 MACBEE 4HFME

• used

• Manufacturer: Macbee

Number of blocks: 4 | Diameter of blocks: 13" | Motors: 3 HP | Speed range: 0 - 600 FPM | Electrics: 240V/60Hz/3 Phase | Equipped with: Siemens Simoreg DC DrivesOil Cooled Die BoxesSpooler Includes 4 Integrated ...

Car-Anth Pneumatic Power Former

• used

• Manufacturer: Car-Anth

Table size: 8" x 31" | Center disc: 6" | Center pin: 1/2" | Equipped with: Foot Pedal