Used Drilling Rigs

HUGHES WILLIAMS LLDH MODEL 1000-DOH DRILL RIG #2940Tb

• Manufacturer: Hughes

Manufactured 1974, Fully refurbished, 80’ depth, 5” inner kelly, 7” outer kelly, John Deere 6068 6 cyl engine, 30 ton Pullmaster main winch, 12,000# service winch, air clutches, Joy sticks for travel and turn, mo...

INGERSOLL RAND TH60 DRILL RIG #5158T

• Manufacturer: Ingersoll Rand
• Model: TH-60

- $325k DUAL ROTARY DRILLING RIG SYSTEM (COMPARABLE TO FOREMOST DR24) (Ref#4743T) EPIROC FLEXIROC D65-LF ROCK DRILL

CROWN CC 750 DRILLING RIG #3983Tb

• Manufacturer: Crown

118’ x 350,000# telescoping crown derrick, 15H telescoping substructure, 17-1/2” x 44 ZP 175 rotary, Ideco UTB 160 ton block/hook combo, (2) Detroit Series 60’s 14L engines 620 hp @ 1800 rpm Price bare rig: $985,...

SEISMIC MODEL 10 DRILLING RIG #4188T

) Rotary table drive, Gardner Denver 5 x 6 FG-41 mud pump, Ingersoll Rand Type 40 air cooled air compressor, munted on 1979 GMC Brigadier J9500 tandem axle truck, 30’ x 9’ x 11’ (10’ with Kelly and lights removed...

1973 CYCLONE 300 DRILL RIG #373T

Manufactured 1973, 871 Detroit diesel on deck, 450 cfm Bendix Westinghouse air compressor, no mud pumps but hydraulics are there, 4” kelly, 8” retractable table, bailing line, hydraulic winch, mounted on 1972 For...

SHOP BUILT 6000’ DRILLING RIG #2918Ta

• Manufacturer: Shopbuilt

Trailer mounted, Cat 550 hp engine, 17-1/2” Oilwell rotary table, 7 x 14” mud pump with Cat engine, 4-1/2” kelly, 2000’ drill pipe, 8 drill collars Price: $155,000

GARDNER DENVER 2500 DRILL RIG #10625T

• Manufacturer: Gardner Denver

Manufactured late 1980’s, double drum drawworks, trailer mounted, Cat diesel engine, brand new derrick in 2022, complete package with approx 1,000' of 6 5/8" drill pipe with 4.5 XH Hole thread, (3) 8" collars, , ...

WILSON MOGUL 42 DRILL RIG #2750T

• Manufacturer: Wilson

96’ x 150,000# telescoping derrick, 300,000# hook load capacity. Substructure 10.8’ height (casing pulling), 14’ (drilling/workover), 225,000lb load capacity (workover) or 400,000# (drilling). Cat 3406 diesel eng...

1997 CANTERRA CT-350 MUD ROTARY DRILL RIG #1520Tc

Manufactured 1997, Gardner Denver 5 x 6 mud pump, Rineer sliding top drive (7500 lbs rotary torque), 28,000 lbs pullback, 35000 lb wireline winch, 12000 lb winch, mast has sliding base and wig wag, mounted on 200...

WILSON SUPER 42 DRILLING RIG #2131T

• Manufacturer: Wilson

Single drum drawworks, mounted on 3 axle trailer, 6V71 Detroit diesel engine, 96’ hydraulically raised mast, Gardner Denver FQ-FXQ 5-1/2 x 16" mud pump with air clutch powered by Detroit 6V71 diesel engine, mud m...

IDECO H44 DRILL RIG #3981T

• Manufacturer: Ideco

Drive in, rated to 6500’ with 4-1/2” drill pipe, (2) Detroit 871 engines (305 hp each), Ideco 108’ x 268,000# mast, 12’ H telescoping substructure, Dreco 150 ton block, ZP 17-1/2” x 44” rotary table, V-door catwa...

2010 WILSON 42 WORKOVER/DRILLING RIG #4044Ta

• Manufacturer: Wilson

Rebuilt 2010, double/triple, 8V92 Detroit with Turbo charger and after cooler, trailer mounted, single drum drawworks, Allison transmission 588 Series, 102’ x 225,000# derrick, gooseneck 3 axle trailer 7’ substru...

INGERSOLL RAND TH55 DRILL RIG #858Ta

• Manufacturer: Ingersoll Rand
• Model: TH-55

Mission Magnum mud pump, Mud Slayer M250 mounted on rig, mounte3d on 1996 Ford tandem axle truck with Cat 3306 engine, PTO, no carousel, rod box, 32 jts of 3-1/2” x 20’ drill rod, 20 jts of 3-1/2” x 10’ rods (all...

1993 INGERSOLL RAND A300 AUGER DRILL RIG #7309Tc

• Manufacturer: Ingersoll Rand

Manufactured 1993, 8855 hours, mounted on 2006 Ford F650 truck with 233,500 miles, 3L6 Moyno pump, telescoping tower, 1 winch, underdeck auger racks, 10’ rod storage, 1 winch, telescoping tower200 gal water tank ...

BUCYRUS ERIE 22W SERIES II CABLE TOOL DRILL RIG #9146Ta

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.19 m

Deutz diesel deck engine, mounted on 995 Louisville L8000 with 300 Cummins diesel engine, 1000’ line, string of tools Price: $59,500 – Ohio

Ingersoll Rand ECM-590 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: ECM-590

Good condition Ingersoll Rand ECM-590 Drilling Rigs manufactured in 2001. Located in USA and other countries. Click request price for more information.