Used Drilling Rigs

1964 FAILING CFD2 DRILL RIG #8107T
- Manufacturer: Failing
- Model: CFD2
Built 1964, 4-1/2 x 5 Failing mud pump, Grimmer Schmidt 125cfm developmental air compressor, 5-1/4” stationary table, 2-3/8” kelly, 10' stroke, mounted on 1984 International truck with DT466 engine, PTO), 4 hydra...
$62,500 USD
Get financing
Est. $1,176/mo
Oceanside, NY
Trusted Seller
2006 Service King 1000 Drilling Rig
- Manufacturer: Service King
www.VIDAEQ.com Service King 1000 HP Drilling Rig For Sale This rig has been cold stacked. The owner will get the rig package into work ready condition prior to delivery. 👉 Viewing this on Machinio? Then follow...
Oklahoma City, OK
SHOP BUILT MUD ROTARY DRILLING RIG #7785T
- Manufacturer: Shopbuilt
Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pu...
$30,000 USD
Get financing
Est. $565/mo
Oceanside, NY
1997 CME LC60 DRILL RIG #10232T
Manufactured 1997, fully refurbished, ready to drill, , brand new rotary head 80k, almost 100% hydraulic hoses has been changed, new winch motor, one new track, new turbo and lots of new pieces, new radio control...
$200,000 USD
Get financing
Est. $3,764/mo
Oceanside, NY
INGERSOLL RAND TH100 DRILL RIG PACKAGE #4218T
- Manufacturer: Ingersoll Rand
- Model: TH-100
) Ingersoll Rand TH100 drill rig, 2000’ depth rating, Range III, Cat C15 (475 hp) engine, 60,000 lb pullback, 2 motor spur gear top head, 16” table opening, KB to ground 14.8’ with sub and 4.1’ no sub, 39’ max ca...
$3,650,000 USD
Oceanside, NY
2016 DIEDRICH D50 DRILL RIG #242T
- Manufacturer: Diedrich
Manufactured 2016, track mounted, John Deere 4 cylinder turbo (115 hp) diesel engine, 24” wide rubber 2-speed track, tandem hydrostatic drive pump, in/out and side to side slide base, cathead, front carrier winch...
$265,000 USD
Get financing
Est. $4,987/mo
Oceanside, NY
1994 TEXOMA 330-12 DRILL RIG #3961Ta
- Manufacturer: Texoma
- Model: 330
- Drilling depth: 7.62 m
- Drill Pipe Diameter: 76.2 mm
Manufactured 1994, 12’ depth, Detroit engine, (1) wet bar kelly, 3” square sub, ring and pinion rotary, 3” kelly bar, 5500 lb winch, hydraulic pole grabber that extends 6’, good condition Price: $65,000
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
1999 INGERSOLL RAND T3 DRILL RIG #11116Tb
- Manufacturer: Ingersoll Rand
Manufactured 1999, 900/350 Doosan air compressor (new 2022), Cat 3406 deck engine (rebuilt May 2022), approx 950 hours on compressor and engine), rotation head completely rebuilt 2024 as well as most hydraulic pu...
$480,000 USD
Get financing
Est. $9,034/mo
Oceanside, NY
2007 MAIT HR-30 DRILL RIG #9160T
- Manufacturer: Mait
Manufactured 2007, Komatsu PC65, drill depth approx 70’, stub on locking kelly bar is 100mm Price: $160,000 MAIT HR30/1 MINI DRILL
$160,000 USD
Get financing
Est. $3,011/mo
Oceanside, NY
WALKER NEER 250-40 DRILL RIG PACKAGE #1042Ta
- Manufacturer: Walker
Top head Drive drill rig, Cat 3406 (500 hp), Alliston 750 transmission, capable of running casing up to 43’, pipe handling boom, hydraulic pipe tongs, pulldown equipped (pulldown chains have been removed), rated ...
$420,000 USD
Get financing
Est. $7,904/mo
Oceanside, NY
1978 SCHRAMM T64 DRILL RIG MODIFIED #5882T
- Manufacturer: Schramm
Manufactured 1978, fully refurbished, 900/250 Sullair compressor, Detroit Series 60 diesel deck engine, mounted on 4 axle (3 in rear, one in front) Freightliner truck with Cummins engine, Funk gear box, 42 gpm pu...
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
1968 GARDNER DENVER 500 DRILL RIG #10015Ta
- Manufacturer: Gardner Denver
Manufactured 1968, (2) 5 x 6 mud pump, 600 cfm air compressor, 7-1/2” retractable table (rebuilt), 24’ fluted kelly, mounted on 1995 Ford L9000 truck with M11 Cummins engine, 10 speed transmission, PTO, 4 hyd lev...
$162,500 USD
Get financing
Est. $3,058/mo
Oceanside, NY
1983 INGERSOLL RAND TH60 DRILL RIG #10631T
- Manufacturer: Ingersoll Rand
- Model: TH-60
Manufactured 1983, retrofitted with 900/300 air compressor (installed 2019 with approx. 1400 hours), Deutz V12 twin turbo deck engine, mounted on 2002 Forden truck with Cummins engine, 4000 miles, rod box, no car...
Oceanside, NY
1973 SANDERSON CYCLONE 300 DRILL RIG #3476T
- Manufacturer: Sanderson
Manufactured 1973, Mounted on 1999 International 4700 truck with diesel engine, PTO, 110,000 miles, centrifugal pump was removed Price: $65,000
$65,000 USD
Get financing
Est. $1,223/mo
Oceanside, NY
1990 DIEDRICH D50 DRILL RIG #3452Tb
- Manufacturer: Diedrich
Manufactured 1990’s, auto hammer, 3 winches, 6 cylinder John Deere diesel engine, mounted on 2013 Hino 268 truck, automatic, approx. 200k miles, used for hollow stem auger and mud rotary wells Price: $62,500
$62,500 USD
Get financing
Est. $1,176/mo
Oceanside, NY
Atlas-Copco FLEXIROC T45 Drilling Rig
- Manufacturer: Atlas-Copco
- Model: FLEXIROC T45
Good condition Atlas-Copco FLEXIROC T45 Drilling Rigs available between 2013 and 2014 years. Located in USA and other countries. Click request price for more information.
USA