Used Processing in Shaanxi, China

Trusted Seller
Hangji 3# Flying Shear HS-FS0708
- Manufacturer: Hangji
The function of the flying shear 1, As the head and rear part of the rolling parts have some defect or the temperature of steel is too low, the flying shear need to cut the head and rear to insure the quality of ...
Xi'An, China
Trusted Seller
Hangji Dividing Flying Shear / Gripping Shear Widely Used in Rebar and Rod Production Line
- Manufacturer: Hangji
Gripping shear The function of the gripping shear The gripping shear is located in the entrance of the pre-finishing mill and finishing mill, it is used to protect the pre-finishing mill and finishing mill by cut...
Xi'An, China
Trusted Seller
Hangji High Working Efficiency Trimming Shear Equipment
- Manufacturer: Hangji
The function of the snap shear The snap shear is fixed behind the track switch, and is used to chop the rolled piece cut off by the flying shear before falling into the offcut collector when some failure occurred...
Xi'An, China
Trusted Seller
Hangji laying head and pinch roll
- Manufacturer: Hangji
The Transmission Gear Box Of The Spinning Machine Is Of Welded Structure, The Gears And Bearings In The Box Are Lubricated With Thin Oil, And The Spinning Head Is Covered In The Safety Cover Of The Spinning Machi...
Xi'An, China
Trusted Seller
hangji Hangji Brand Rebar Processing Machinery
- Manufacturer: Hangji
1. The purpose of the equipment The finishing mill group is composed of top crossed 45° High-speed wire-rod finishing mills. The finishing mill group is located in high-speed wire-rod workshop. Through 10 unit ra...
Xi'An, China
Trusted Seller
hangji Manufacturing Metallic Processing Equipment of Steel Hot Rolling Mill Machines
- Manufacturer: Hangji
Product Description WKD as a professional steel rolling mill manufacturer for steel rebar and wire rod or some sectional steel. also provide the accessory equipment and spare parts used in steel rolling line , li...
Xi'An, China
Trusted Seller
Hangji Full Automatic Pinch Roll Used in Steel Processing Line
- Manufacturer: Hangji
Pinch Roll 1. Equipment Application The pinch roll and wire discharger are arranged after water cooling plant of finishing roll. The pinch roll is the device for steel line rolling production which mainly used fo...
Xi'An, China
Trusted Seller
Hangji Low Power Consumption Roling Mill Equipment Used in Steel Processing
- Manufacturer: Hangji
The function of 135m finishing mill group The finishing mill group is composed of top crossed 45° High-speed wire-rod finishing mills. The finishing mill group is located in high-speed wire-rod workshop. Through ...
Xi'An, China
Trusted Seller
Hangji brand Steel Rolling Mill Machinery (turn-key) /Hot Rolling Mill Process
- Manufacturer: Hangji
Common technical processing overview Continuous casting square billets ------ Heating furnace ---- High pressure water descaling ---- Roughing mills group ----- # 1 Flying Shears ---- Intermediate mills group ---...
Xi'An, China
Hydarulic Mono Strand Jack
- Manufacturer: Zhongtuo
- Model: ZT
Product Description Description of Mono strand jack: Quick acting grips are perfect for pullout testing of grouted re-bar on highway, bridge and tunnel applications. When used with a hydraulic jack, just slip...
Shaanxi, China
Synchronous Lifting System for Steel Strand Jacks Post Tension Jack
- Manufacturer: Zhongtuo
- Model: ZT
ZT PLC Hydraulic Strand Jack Synchronous Lifting System for Large Buildings Product Lines : Heavy Lifting Technology ·Precision control of synchronous lifting and lowering ·Can be controlled by a single operat...
Shaanxi, China
12.7mm Post Tensioning Mono Strand Jack
- Manufacturer: Zhongtuo
- Model: ZT
Mono Strand Pulling Jack Is a multi-purpose pre-stressed tensioning device, easy to operate. Mainly used for single hole tensioning. But also for porous preload, tension and troubleshooting, and can be applied ...
Shaanxi, China
Multi PC Strand Jack for Bridge Building Prestressing
- Manufacturer: Zhongtuo
- Model: ZT
Product description 1. Model: YQC270(27 tons), YDC240(65 tons). 2. Capacity: 27 tons and 65 tons, Tension Journey: 200mm, Tension Cylinnder Area: 4418mm², Weight: 24kg, Size: 108x510mm. 3. Usage: For stre...
Xi'An, China
Trusted Seller
Hangji The Chopping Shear for The Steel Producing Line
- Manufacturer: Hangji
Equipment composition and structural characteristics. Snap shear is composed by motor, shear machine housing, base, pinch roll and tool rest, shear machine housing is composed by lower base, middle box and upper ...
Xi'An, China
Trusted Seller
Hangji Snap Shear-15
- Manufacturer: Hangji
Gripping shear The function of the gripping shear The gripping shear is located in the entrance of the pre-finishing mill and finishing mill, it is used to protect the pre-finishing mill and finishing mill by cut...
Xi'An, China