- Trusted Seller
1980 ROUNDO PS 460/10 #1601019
- Manufacturer: Roundo
- Model: PS 46010
SPECIFICATIONS: Roll diameter: 18" TOP ROLL | Capacity, prebend: 10' X 1.25" | Capacity, mild steel: 10' X 1-1/2" | Hydraulic adjustment: YES | Roll position indicators: YES | Pendant control: YES | Hydraulic mot...
Toledo, OH - Trusted Seller
5' X .220 Roundo Plate Roll Z23020
- Manufacturer: Roundo
5' Maximum Width 7/32 Thickness Capacity 8.07" Diameter Top And Bottom Roll 6.29" Diameter Side Rolls Hydraulic Drop End Hydraulically Driven Pre Bending Capacity 59.0" x .256 Rolling Capacity 59.0 x .433 1991 4 ...
- Trusted Seller
2" x 2" x 1/4" ROUNDO "SR-2" HYDRAULIC HORIZONTAL ANGLE-BENDING ROLL w/LEG-IN LEG-OUT - HYDRAULIC ROLL ADJUSTMENT - SET OF ROLLS - PENDANT CONTROL
- Manufacturer: Roundo
2" x 2" x 1/4" ROUNDO HYDRAULIC HORIZONTAL ANGLE BENDING ROLL Imperial Metric New 2006, Serial No 06815, Model SR-2 EQUIPPED WITH: Leg In - Leg Out Hydraulic Roll Adjustment Set of Rolls On Machine Hand Held Pend...
2013 ROUNDO PS-255
- Manufacturer: Roundo
2013 ROUNDO PS-255 plate roll, used. 10' rolls, 0.5" max thickness, hydraulic, 10 hp motor. Pyramid type with double joystick control. Top roll diameter 10.03", side rolls 13.39". Ideal for precise bending tasks.
Naperville, IL- Trusted Seller
2002 Roundo PASC-360 1" x 10' 4-Roll Hydraulic Plate Bending Roll
- Manufacturer: Roundo
Features: Moveable Operators Control Console Digital Readouts for Roll Positioning Variable Roll Speed Hydraulic Drop End Hydraulic Tilt of Each Side Roll for Cone Rolling Overhead Plate Support Equipped With: Mo...
Melville, NY - Trusted Seller
ROUNDO R-3 HYDRAULIC ANGLE BENDING ROLL
- Manufacturer: Roundo
Serial# 007264 Capacity: -Angles- 3″ x 3″ x 5/16″ Wired 208-230/460v 3ph Comes with the standard split rolls for flats and a set of 1 1/4″ & 1 1/2″ pipe rolls ***ALL ORIGINAL PAINT- MACHINE SAW VERY LITTLE USE***
- Trusted Seller
Roundo R9S
- Manufacturer: Roundo
8" X 8" X 1" ROUNDO HYDRAULIC ANGLE BENDING ROLL MODEL R9S S/N OD2732 NEW 1982 ROLL DIAMETER .................... 29" ANGLE IRON, LEG OUT .............. 8" X 8" X 1" MIN. DIAMETER .....................
- Trusted Seller
Roundo 50″ of 12ga Sheet Metal Bending Roll
- Manufacturer: Roundo
Serial# 3388 Shipped- 2001 Capacity- 50″ of 12ga Mild Steel Wired- 220v 3ph All original paint. Rolls are in good shape.
- Trusted Seller
2023 Roundo R4S 4" x 4" x 1/2" Hydraulic Angle Bending Roll
- Manufacturer: Roundo
- Model: R4
Features: Siemens Simatic HMI NC Control Electronic Measurement of Rotation Standard Set Of Bending Rolls Hydraulic Powered Adjustment Of Lower Rolls Hydraulic Guide Rolls Pushing Roll Unit Equipped With: Siemens...
Melville, NY - Trusted Seller
Roundo PS-360 1″ x 10′ Hydraulic Plate Bending Roll
- Manufacturer: Roundo
Product Description General Info Stock #: 120250062 Location: Decatur, GA Brand: Roundo Model: PS-360 Serial #: 976489 Year: 1997 Approx. Shipping Weight: 40,000 Lbs. Approx. Shipping Dimensions: 18′ L x 7′ W x 8...
Stone Mountain, GA - Trusted Seller
Roundo PASC-360 1″ x 10′ 4-Roll Hydraulic Plate Bending Roll
- Manufacturer: Roundo
Product Description General Info Stock #: 121250040 Location: NY Brand: Roundo Model: PASC-360 Year: 2002 Approx. Shipping Weight: 47,500 lbs Loading Fee: Rigging Required Specifications Bending Capacity: 1″ x 10...
Stone Mountain, GA - Trusted Seller
ROUNDO R-3-S
- Manufacturer: Roundo
- Model: R-3-S
ROUNDO (NEW) MODEL R-3-S ANGLE ROLL ANGLE LEG CAPACITY - 3" X 3" X 3/8" LEG OUT - 3" X 3" X 3/8" LEG IN - 3-1/2" X 3/4" FLAT ON EDGE - 6" X 1-1/4" FLAT IRON ON FLAT 10" ROLL DIAMETER DRIVE ON ALL 3 ROLLS - INFINI...
Dodge Center, MN - Trusted Seller
ROUNDO R-62-S
- Manufacturer: Roundo
ROUNDO (NEW) MODEL R-62-S SECTION ROLL (3) DOUBLE PINCH ROLLS 7-1/8" TOP SHAFT DIAMETER 6-1-4" LOWER SHAFT DIAMETER 18" X 1/8" TOP AND LOWER ROLL DIAMETER 0-23 FPM ROTATION SPEED 20 HP FEATURES - UNIVERSAL MODULA...
Dodge Center, MN - Trusted Seller
ROUNDO R-4-S
- Manufacturer: Roundo
- Model: R4
ROUNDO (NEW) MODEL R-4-S ANGLE ROLL ANGLE LEG CAPACITY - 4" X 4" X 1/2" LEG OUT - 4" X 4" X 3/8" LEG IN - 5" X 5/8" FLAT ON EDGE - 7" X 1-1/2" FLAT IRON ON FLAT 12.2" ROLL DIAMETER DRIVE ON ALL 3 ROLLS - INFINITE...
Dodge Center, MN - Trusted Seller
2007 ROUNDO R-5-S
- Manufacturer: Roundo
- Model: R-5-S
ROUNDO (USED) MODEL R-5-S 5" X 5" X 1/2" ANGLE LEG-OUT 4" X 4" X 1/2" ANGLE LEG-IN 8" X 2" FLAT IRON ON FLAT 6" X 5/8" FLAT ON EDGE 5" PIPE 8" I BEAM AND CHANNEL 2-3/4" TO 32" ID SQUARE BAR 3-1/2" TO 40" OD ROUND...
Roundo R4 Bending & Forming
- Manufacturer: Roundo
- Model: R4
Good condition Roundo R4 Bending & Formings available between 1965 and 1995 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword