Used Processing in Oregon, USA

NEW STOCK LETINA 5550GAL/21,000L CLOSED TOP JACKETED STORAGE TANK

Item is a new stock Letina 21,000L (5550 Gallon) closed top jacketed storage tank with valves and fittings. Specifications are as follows: — volume approx. 21000 lit — coat diameter 2230 mm, height 5300 mm — tota...

Lightnin Agitator

• Manufacturer: Lightnin

Item is a used, Lightnin, .75 HP, clamp style agitator. It is equipped with a 54" long by 7/8" diameter S/S shaft and with 11" (3) blade S/S propeller. Motor RPM is 1725. Requires 230/460 volt 3 phase power supply.

Lightnin 1 1/2 HP agitator

• Manufacturer: Lightnin

(2) Available - Item is a used, 1 1/2 HP, Lightnin Agitator drive w/4 bolt flange mount(for vertical, top of tank mount). (no agitator shaft included). 230-460 volt/3 phase.

Groen 150 Ga. Kettle

• Manufacturer: Groen

Item is a used, Groen 150 gallon, S/S, half jacketed, hemispherical bottom, kettle. The kettle is rated at 40 PSI (?). National Board #4814.

Lightnin 1 1/2 HP Agitator

• Manufacturer: Lightnin

(2) Available - Item is a used, Lightnin 1 1/2 HP agitator with 4 bolt flange mount (for vertical, top tank mount). Agitator drive and gear box-no shaft included. 230-460 volt/3 phase.

(1) Available - Deutsche Beverage 15 bbl / 465 Gal Jacketed Brite/ Storage tank

• Manufacturer: Deutsche Beverage

(1) Available - Used 15 bbl / 465Gal Deutsche Beverage Technology jacketed stainless brite / storage tank, 9' 8" H x 44' dia, center bottom, 18" legs, with valces, fittings, carbstone, prv, four legs with cross b...

Pack Leader Shrink Sleeve labeling machine - model SL10, 2021 and 2m steam tunnel

• Manufacturer: Pack Leader

Item is a used Pack Leader model SL10 shrink sleeve labeler last used with a Twin Monkeys can line to sleeve and assortment of beverage can sizes. the machine was built new in 2021 and remains in excellent condit...

2022 Stout 10 bbl - 310 Gal Fermenter Storage Tank

• Manufacturer: Stout Tanks
• Model: CF10

(1) Available - Used Stout 10 bbl / 310 Gal jacketed fermenter / storage tank - - Shadowless Manway for easy cleaning - (2) Glycol Zones - (2) 1.5" butterfly valves - Adjustable Racking Arm for clear transfer - ...

Admix 105RS88S High Shear Mixer

• Manufacturer: Admix

Item is a used Admix Rotosolve, 7 1/2 HP, high shear mixer. It is equipped with a Baldor S/S motor turning at 3520 RPM with 230/460 volt power requirement. It is a flange mount mixer with approximately 42" long s...

(1) Available - Used JV Northwest 170bbl / 5270Gal jacketed/insulated storage tank - HLT

• Manufacturer: JV Northwest

(1) Available - Used JV Northwest 170 bbl / 5270 Gallon jacketed and insulated HLT / storage tank. The tank was previoulsy used a a hot water tank with low pressure steam used to heat the vessel with the included...

(1) Available- Used CPE Cart Mounted Heat Exchanger

• Manufacturer: CPE

(1) Available - Item is a used CPE heat exchanger - Model CPE30H-XXD. This unit is designed with painted end plates and stainless heat transfer plates. The manufcturer describes the unit as follows- "Specificall...

Quincy NW Screw Compressor

• Manufacturer: Quincy

Item is a used, Quincy, 30 HP, MG Series, rotary screw air compressor. This is an air cooled machine set up for 230 volt/3 phase power. Machine was serviced on a regular schedule and is in very good condition. Lo...

2020 DC Norris Ltd. 600 gallon Hemispherical Kettle (Scrape)

• Manufacturer: DC Norris

Item is a used, DC Norris, Ltd. 600 gallon Hemispherical kettle. The machine was manufactured in 2020 and is National Board certified #49. The jacket is rated at 100 PSI at 338 degrees F. It is equipped with a va...

New Stock Letina 158 Gallon / 600L Variable Capacity Jacketed Storage Tank

• Manufacturer: Letina Inox

New Stock Letina 600L / 158 Gal VC jacketed tanks with new style jackets and specifications as follows- — volume approx. 600 lit — coat diameter 797 mm, height 1250 mm — total height approx. 1550 mm — 3 legs,...

2004 bevco M170R-ZPPI

• Manufacturer: Bevco

Item is a used, BEVCO cap/head space sterilizer.(Lay-Flat style conveyor). Frame is all S/S construction w/S/S stand-alone control cabinet. Power requirement is 460 volt/3-phase. It is currently configured with t...