- Trusted Seller
Sandretto 150 TON
- Manufacturer: Sandretto
Features Hydraulic sausage press Origin Italy Condition Used
Lima, Peru 
SANDRETTO MICRO 65/247
- Manufacturer: Sandretto
Injection machine brand "SANDRETTO", model "MICRO 65/247.
2010 SANDRETTO HES 3500
- Manufacturer: Sandretto
Injection machine SANDRETTO HES 3500 (with MASTER MATTIC RB 500CN robot). 1.2 TECHNICAL DATA TYPE MEGA H ES MODEL KN 35000 EUROMAP CLASSIFICATION 54250 Control Panel SEF 2000 Thread diameter mm 200 L/D Rat...
Marinha Grande, Portugal
1997 SANDRETTO EUROMAP 612/200
- Manufacturer: Sandretto
Injection machine SANDRETTO EUROMAP 612/200. Closing force: 610 tons | Screw diameter: 75 mm | Screw l/d ratio: 21 | Maximum screw speed: 153 rpm | Injection volume: 2 831 cm³ | Injection pressure: 1 548 bar | Sc...
Marinha Grande, Portugal
1997 SANDRETTO OTTO 2054/380
- Manufacturer: Sandretto
- Model: OTTO 2054380
Injection machine SANDRETTO OTTO 2054/380 Screw diameter: 75 MMS | Course volume: 1370 CM CM³ | Grip strength: 3800 | Rear knejector strength: 87 KN | Screw length: 21 L/D | Plastification capacity: 69,9 G/1" | N...
1997 SANDRETTO MEGA T 610
- Manufacturer: Sandretto
- Model: MEGA T 610
"SANDRETTO" brand injection machine, model "MEGA T610", with MASTER MATTIC RB300CN robot.
Marinha Grande, Portugal
1991 SANDRETTO EUROMAP 612-150 Serie Otto 150 S8 150
- Manufacturer: Sandretto
SANDRETTO EUROMAP 612-150 Serie Otto 150 S8 150 7Tn year 1991 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal
1985 SANDRETTO EUROMAP 515-135 Serie 135
- Manufacturer: Sandretto
- Stroke length: 575 mm
SANDRETTO EUROMAP 515-135 Series 135 5.7Tn year 1985 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal
1995 SANDRETTO EUROMAP 430-120 Serie Otto 120
- Manufacturer: Sandretto
- Stroke length: 870 mm
SANDRETTO EUROMAP 430-120 Series Otto 120 4.5Tn year 1995 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal
1988 SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350
- Manufacturer: Sandretto
- Stroke length: 575 mm
SANDRETTO EUROMAP 1960-350 Series hp 350 S7 350 14.5 Tn year 1988 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal
1993 SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350
- Manufacturer: Sandretto
- Stroke length: 575 mm
SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350 14.5 Tn Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal- Trusted Seller
SANDRETTO 200 ton
- Manufacturer: Sandretto
- Stroke length: 800 mm
Ton: 200 | Frame: H FRAME | Inspection: 2015 | Table - x: 1300 | Table - width (mm): 1300 | Slide - piston rods: 1 | Table - y: 1100 | Piston rods: 1 | Slide - x: 1300 | Slide - stroke - mm: 800 | Mould mounting...
Susa, Italy - Trusted Seller
SANDRETTO 350 ton
- Manufacturer: Sandretto
- Stroke length: 800 mm
Ton: 350 | Table - x (mm): 1800 | Slide - stroke (mm): 800 | Frame (h/c): H FRAME | Inspection: 2021 | Activation system (eccentric/link motion/knucle joint/oleodynamic/screw fly): OLEODYNAMIC | Table - y (mm): ...
Turin, Italy 
SANDRETTO
- Manufacturer: Sandretto
- Capacity: 200,000 kg
Hydraulic Press with 2 Uprights Capacity: 200 tons | Table size: 1600x1250 mm | Typology: OLEO | Push points: 1 | Sleigh ride: 600 mm | Vertical light: 1000 mm | Sled size: 1600X1250 mm | Slide width: 1600 mm | S...
Settimo Torinese, Italy- Trusted Seller
SANDRETTO HYDRAULIC PRESS – 60 TON – 1985
- Manufacturer: Sandretto
SANDRETTO HYDRAULIC PRESS – 60 TON – 1985 With 600×600 mm mould for ceiling panels This Sandretto hydraulic press is a robust C-frame (C-type) metal forming press designed for industrial stamping, sheet-metal w...
Savona, Italy
Tip: Enter manufacturer, model or keyword
