Building Filters
MX-2 MECAL SAW FOR LATH
- Manufacturer: MECAL
MX-2 V. Lath saw. With 2 cutting discs for cutting the corner. VIEW TECHNICAL DATA Rotation speed 2800 rpm Electrical frequency Hz 50 Installed electrical power kW 1.5 Air consumption of compressed air per work c...
Agios Dimitrios, Greece
NEBES TM 210 TF / MF TAPE SAW
specifications Adjustable cutting angle ranging from 0 ° to 60 ° Cast iron for both the strong high-speed forge and the body. Fast tape tightening system with rings and double tapered bearings. The pressure readi...
Agios Dimitrios, Greece
Machinery
Description Technical characteristics ALVA 55 Pneumatic tilting of heads at 90 o -45 o – 22.5 o Intermediate angles via stops at the front of the machine Direct motor transmission Motor power: 2.2 kW Hydro-pneuma...
Thessaloniki, Greece
Machinery
Description Technical characteristics ALVA 55 THETA Cutting from 22.5 o to 90 o with electronic control at each intermediate degree Direct motor transmission Motor power: 2.2 kW Hydro-pneumatic disc feed (adjusta...
Thessaloniki, Greece
Machinery
Description Technical characteristics Head tilt: 90°- 45°- 22.5° and intermediate angles through front mechanical stops suitably protected from chips No. 2 carbide cutting discs with a diameter of 500 mm Hydrauli...
Thessaloniki, Greece
TM 275 NEBES Iron saw
Band saw of NEBES TM 275 metals Italy Three-phase Heavy industrial construction !!! Adjustable cutting angle ranging from 0 ° to 60 ° Cast iron for both the strong high-speed forge and the body. Fast tape tighten...
Agios Dimitrios, Greece
TDC 622 DYNACUT MECAL DOUBLE SAW
DOUBLE SAW OF UP AND ADVANCED DISCS Fixed cutting unit on the left. Electric positioning of the mobile cutting unit. The Saw is with 3 Axes managed by CNC, driven by 5Kw servomotors each. Inclination of cutting h...
Agios Dimitrios, Greece
SW 550 R / PLUS MECAL
- Manufacturer: MECAL
Description SW 550R/PLUS MECAL SEE THE BROCHURE • Single head aluminum saw with frontal output of the disc • It is able to perform cuts at 22.5 °- 45 °- 90 °- 135 °- 157.5 ° • All intermediates can be adjusted wi...
Agios Dimitrios, Greece
AS 600 TOP FACTORY DIGIT MECAL
Description • Single head aluminum saw with automatic pneumatic and hydraulically controlled upward discharge of the disc • It is able to perform cuts at 20 °- 45 °- 90 ° • All intermediates can be adjusted with ...
Agios Dimitrios, Greece
AS 500 TOP FACTORY MECAL
- Manufacturer: MECAL
AS 500 TOP FACTORY MECHANICAL Description Single head aluminum saw with automatic pneumatic and hydraulically controlled upward discharge of the disc It is able to perform cuts at 20 °- 45 °- 90 ° All intermediat...
Agios Dimitrios, Greece
TDC 622 EDGEMASTER-5A MECAL DOUBLE SAW
- Manufacturer: MECAL
Aluminum double saw TDC 622 EDGEMASTER-5A 5 AXIS DOUBLE RISING DISC SAW FOR DIFFICULT JOINTS IN ANYONE FATE Fixed cutting unit on the left. Electric positioning of the mobile cutting unit. The Saw is with 5 Axes ...
Agios Dimitrios, Greece
HANSTAHL S225 Band Saw
specifications Hydraulically adjustable automatic head descent Adjustable cutting angle ranging from 0 ° to 60 ° Cast iron for both the strong high-speed forge and for the body. Fast tape tightening system with r...
$3,951 USDAgios Dimitrios, Greece