Used Saws in Illinois, United States

- 225 listings found
Sort by Price: Low to High | High to Low
  • 1989 Hyd-Mech S-20 Horizontal Band Saw, 13" x 18" Swivel Head, PRICE

    • Manufacturer: Hyd-Mech
    • Weight: 1,450 LBS

    Hyd-mech s-20 horizontal band saw, swivel head model: s-20 serial number: 20589298 year: 1989 capacity: 13" x 18" rectangle: 13" x 18" blade wheel: 16" diameter blade speed (4): 90- 140- 220- 310 fpm blade size: ...

    $4,500 (USD)
    West Salem, IL, USA
  • 2010 MARVEL Series 8 Mark II Tilt Frame Vertical Band Saw, 2010

    • Manufacturer: Marvel
    • Weight: 2,700 LB

    Marvel series 8 mark ii tilt frame vertical band saw, 2010 model: 8-mark-ii serial: 830706 horizontal capacity: 17" vertical capacity: 22" vertical capacity at 45 degrees: 12-3/4" wheel diameter: 18" table height...

    $14,900 (USD)
    West Salem, IL, USA
  • 1997 13" X 20" KALAMAZOO TWIN POST SEMI-AUTOMATIC HYDRAULIC HORIZONTAL BAND SAW 18390

    • Manufacturer: Kalamazoo
    • Motor: 3 HP 230/460/3/60
    • Weight: 1350

    Age? full stroke hydraulic vise variable vise pressure hydraulic rise and fall hydraulic blade tensioning broken blade shutoff coolant pump chip pan control console

    No price
    Des Plaines, IL, USA
  • 14" STARTRITE MANUAL CIRCULAR NON FERROUS COLD SAW 18370

      • Motor: 4 HP 460/3/60
      • Weight: 530

      Model cn350mp air vising head swivels 0 to 475 deg. left & right manual down feed

      No price
      Des Plaines, IL, USA
    • 35″ x 16″ DOALL D-900 VERTICAL DIAMOND BAND SAW

      • Manufacturer: Doall

        35″ x 16″ doall d-900 vertical diamond band saw serial no. 590-08102                                     new 2008 equipped with pallet of approx. 100 brand new blades coolant pump & tank 15 hp variable frequency ...

        No price
        Bannockburn, IL, USA
      • NEW – 22″H x 18″W HYD-MECH VW-18 VERTICAL TILT FRAME BAND SAW

        • Manufacturer: Hyd-Mech
        • Weight: 2700 Lbs

        New – 22″h x 18″w hyd-mech vw-18 vertical tilt frame band saw the vw-18 ii is a semi-automatic vertical band saw with the ability to miter from 60° left to 60° right. this model is one of a kind in the hydmech li...

        No price
        Bannockburn, IL, USA
      • 1993 Ditch Witch 7610

        • Manufacturer: Ditch Witch
        • Model: 7610

          80 hp deutz diesel engine 4 speed transmisision. ground drive creep control. 4 way backfill blade a645 rockwheel 24" depth by 6" width. fresh service including: engine oil, oil filter, air filter, fuel filter, & ...

          $24,500 (USD)
          Clinton, IL, USA
        • 1994 16" x 16" Hyd-Mech H-16A, Auto Feed, 1.5" Blade, 10 HP, Bundling

          • Manufacturer: Hyd-Mech
          • Motor: 10 HP 3/60
          • Weight: 12,500 Lbs.

          (1) used 16" x 16" hyd-mech automatic horizontal band saw, model h-16a, s/n c0395036h, new 1995 programmable length control (plc-100) for both piece length and piece count operator's manual override for all funct...

          No price
          Chicago, IL, USA
        • TYPE M WINTER CUTOFF SAW

          • Manufacturer: Winter

            Type m winter cutoff saw hss blades only ‑ cuts ferrous & non‑ferrous capacity: 3‑1/4" round bar 5" tube 4" x 2" rectangular bar type m ‑ six speeds approx.: 16, 22 33, 50, 73, 108 rpm equipped with: vertical arb...

            No price
            Elk Grove Village, IL, USA
          • 5-1/2" BEHRINGER VERTICAL COLD MITRE SAW

            • Manufacturer: Behringer

              Used 5-1/2" behringer vertical cold mitre saw with hydraulic feed model no. vms400h mfd. 2009 cutting capacity: flats 90°: 9.874" x 4.724" flats 45°: 5.511" x 4.724" flats 30°: 3.937" x 3.937" square 90°: 4.724" ...

              No price
              Elk Grove Village, IL, USA