Used table in Oregon, USA

Invicta 2-Saw, 10' Wide Sliding Table Panel Saw

Used ) Invicta 2-Saw, 10' Wide Sliding Table Panel Saw. Model RP31 Tetra "A". Built in 2002. Adjusts from 12" to 120". Saw stations are both adjustable to 45�. Main saw motors are approx. 5HP and have 14" di...

Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw

• Manufacturer: Wadkin - Bursgreen

Used Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw, S/N 87333. 12" diameter blade tilts either left or right 45�. 3-1/2" tall fence opens 26" right of saw and left stops go out to ...

Invicta Panel Saw, 2-Saw, 10' Wide Sliding Table Panel Saw

Used Invicta 2-Saw, 10' Wide Sliding Table Panel Saw. Model RP31 Tetra "A". Built in 2002. Adjusts from 12" to 120". Saw stations are both adjustable to 45 degrees. Main saw motors are approx. 5HP and have 1...

Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw

• Manufacturer: Wadkin - Bursgreen

Used Late Model Wadkin Model CP12 Heavy Duty Tilting Arbor Sliding Table Panel Saw, S/N 87333. 12" diameter blade tilts either left or right 45�. 3-1/2" tall fence opens 26" right of saw and left stops go out to ...

Marvel 8 Mark II Bandsaw with In & Out Feed Conveyors

• Manufacturer: Marvel
• Model: 8 Mark II

See photos for dimensions Weight: ~2800 lb | Saw type: Vertical Bandsaw with Tilt Frame | Serial: 826908 | Blade length: 14’ 6” | Blade width: 1” | Blade speed: 50-450 SFPM | Capacity: 18” x 22” | Height: 84 ½” |...

SELCO Model EB100 Front Load Horizontal Beam Panel Saw

• Manufacturer: Selco

Used SELCO Model EB100 Front Load Horizontal Beam Panel Saw Max. Cutting Length: 3800mm - Max. Pusher Stroke: 3200mm - Max. Blade Projection: 100mm - Max. Gripper Opening: 97mm - Automatic Side Squaring Device - ...

SAFETY SPEED CUT Model 7400 Vertical Panel Saw

One Used SAFETY SPEED CUT Model 7400 Vertical Panel Saw (American made) Standard Equipment � 3 Hp continuous duty induction saw motor, 7.6 amps 230 volt 3 phase with optional Scoring Blade � Maximum crosscut 6...

36" Vertical Band Saw

28" x 32" Table No identification tags on unit Size: 36"

New Oliver Cut-Off Saw, Model 5025.002 18" Cut Off Saw

One (1) New Oliver Model 5018.002 18"Left Hand Cut Off Saw with 7-1/2HP 3 phase motor prewired for 230 volts. 3450 RPM arbor speed. Left Hand Model uses an 18" diameter saw blade with 1" bore (saw blade not inc...

Bandsaw Guide Dresser, Heavy Duty Automatic Bandsaw Guide Dresser

Heavy Duty Automatic Bandsaw Guide Dresser. 110V operation. Carbide cutter. Automatic table traverse. Inside light. 10" X 1-1/2" 90 degree fixture. Full enclosure. Excellent condition. See photos of Heavy ...

Bandsaw Guide Dresser, Heavy Duty Automatic Bandsaw Guide Dresser

Heavy Duty Automatic Bandsaw Guide Dresser. 110V operation. Carbide cutter. Automatic table traverse. Inside light. 10" X 1-1/2" 90 degree fixture. Full enclosure. Excellent condition. See photos of used He...

R. Hoe (Simonds International) Bandsaw Guide Dresser, Motorized Bandsaw Guide Dressing Machine

• Manufacturer: International

R. Hoe (Simonds International) Motorized Bandsaw Guide Dressing Machine. 1/3HP 110V motor. Carbide cutter. Manual table traverse. Fixture for 42 degree 14" X 1-3/8" guides. Other sizes and angles available. ...

Jacobsen Bandsaw Guide Dresser, (Simonds International) Bandsaw Guide Dresser, Model JM-100A Automat

• Manufacturer: Jacobsen

Jacobsen (Simonds International) Model JM-100A Automatic Bandsaw Guide Dresser. 110V operation. Carbide cutter. Automatic table traverse. Adjustable guide fixture for guides up to 11" X 1-3/4" with variable a...