Building Filters
1991 Amada HFA-300
- Manufacturer: Amada
- Model: HFA-300
Product name: Band saw | Main specifications: Cutting capacity: Φ330, □330×330, Blade dimensions: 32×1.066×4115mm
Tokigawa, Japan
2006 Amada HFA300
- Manufacturer: Amada
- Model: HFA-300
Product name: Band saw | Main specifications: Cutting capacity: Φ330, □330 x 330, Blade dimensions: 32 x 1.06 x 4115
Tokigawa, Japan
2003 Daito GAⅡ510
- Manufacturer: Daito
Product name: Band saw | Main specifications: Cutting capacity: Φ510, □510, saw blade dimensions width thickness length: 41 x 1.27 x 5300 mm, saw blade speed: 10~137
Tokigawa, Japan
1995 Amada HFA-400
- Manufacturer: Amada
- Model: HFA-400
Product name: Band saw | Main specifications: OT240011 Cutting capacity: Round material φ420㎜ Square material w415×H415㎜ Saw blade speed 50Hz 15～90m/min 60Hz 17～90m/min
Tokigawa, Japan
2005 Amada HFA-700CⅡ
- Manufacturer: Amada
- Model: HFA-700
Product name: Band saw | Main specifications: Cutting capacity: Φ290~Φ700mm, □700×800mm~30×290mm, saw blade dimensions (width/thickness/length): 67×1.6×8300mm, running speed: 15~120m/min (inverter speed change),...
Tokigawa, Japan
2012 Daito STⅡ4565
- Manufacturer: Daito
- Model: ST4565
Product name: Band saw | Main specifications: We are currently preparing. Please wait a moment. | Remarks: We are currently preparing. Please wait a moment.
Tokigawa, Japan
2007 Amada HFA250
- Manufacturer: Amada
- Model: HFA-250
Product name: Band saw | Main specifications: Cutting capacity: Φ250, □270×250, Blade dimensions: 27×0.9×3505
Tokigawa, Japan
1986 Amada HA-700
- Manufacturer: Amada
- Model: HA-700
Product name: Band saw | Main specifications: Cutting capacity: Round material φ700, Square material W800 x H700, Saw blade speed 50Hz: 12-80m/min, 60Hz: 14-96m/min, Minimum clamp width 200, Chip conveyor
Tokigawa, Japan
1990 Amada V-400
- Manufacturer: Amada
- Model: V-400
Product name: Contour machine | Main specifications: Capacity: 250 high x 400 deep Saw blade speed: 15-19 m/m Saw blade dimensions: 3375-3535 Adjustment: 80 3-phase 200V Motor saw 1.5Kw Grinder 0.06kW
Tokigawa, Japan
Makita CE001GZN
- Manufacturer: Makita
Power and high speed cutting exceeding engine type. Blade diameter 355mm Maximum depth of cut 127mm Wrench 13-19, coupling sleeve, ring 20 (OD Φ22) Φ25.4 Φ30.5) This product is This product is the main body only....
$868 USDKumagaya, Japan
Artendorf F45 ProDrive
- Manufacturer: Ardendorf
Ascent and descent of the spindle is equipped with CNC control as standard. With easy-to-see large LCD display Enter the operation with the numeric keypad. The self-diagnostic function accurately displays the poi...
Kumagaya, Japan
Synx SRP II
- Manufacturer: Shinx
Multi-stage hold down. LM guide running rail type saw table Rigid frame SINUC3500 Easy operation with touch type color LCD. Another operation can be performed while the machine is in operation. Easy input mode an...
Kumagaya, Japan
Matsui Ironworks ZC-300
- Manufacturer: Matsui
-Can be selected between 4' (12mm) and 5' (15mm) depending on the blade specifications. -The same thickness as the material to be installed is used as a ruler. The finish will be seamless. -Can be used for new co...
Kumagaya, Japan
Matsui Ironworks KM-101 with 5-minute blade
- Manufacturer: Matsui
-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...
Kumagaya, Japan
Matsui Ironworks KM-101 with 3-minute blade
- Manufacturer: Matsui
-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...
Kumagaya, Japan