Building Filters
- Trusted Seller
LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph
- Manufacturer: LeTarte
Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,620 USDMillersburg, IN - Trusted Seller
LeTarte EM11KA #82442
- Manufacturer: LeTarte
SPECIFICATIONS: EQUIPPED WITH: (2) WESTINGHOUSE MOTORS FOOT PEDAL COOLANT SYSTEM AIR SYSTEM ALLEN BRADLEY SWITCH NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA RABAUD XYLOSCIE 600 EM
- Manufacturer: Rabaud
Safe and ergonomic stand sawhorse with holding clamp and handle. Blade is fully covered by a casing with a mobile cover on the cutting area thanks to the rocking stand. Controlled cutting length by adjustable dea...
Moriches, NY- Trusted Seller
2026 CAM-WOOD CS-18AAT-16/SFJ 300 END MATCHER (W/OPTIMIZING CUTOFF SAW) [EM-300007]
- Manufacturer: Cam-Wood
CAM-WOOD 16' Pusher Type Cutoff Saw with Crayon Marking connected to a CAM-WOOD 12" wide End Matcher; System width capacity is 12" with a maximum inbound board length of 16' (as priced here). 8' and 12' Saws are...
- Trusted Seller
CTD Machine Double End Compound Miter Pneumatic Trim Saw 3HP 460V 3PH 16' Rail
- Manufacturer: CTD Machine
Miter Saw in good working condition. CTD Machine 2DC-02. Recently upgraded to 3Hp motors and added Powerflex VFD drive. 10" Blades. 16' Rail length, 36" work height. 28" Base depth. If this item ships as Flat Rat...
$4,250 USDMillersburg, IN 
$1,973 USDMombercelli, Italy
CANTEK | CFS100 AUTOMATIC DEFECT CUTOFF CHOP SAW
- Manufacturer: Cantek
- Model: CFS100
The Cantek CFS100 Automatic Defect Cutoff Chop Saw is the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indi...
- Trusted Seller
Cantek CFS100 Automatic Defect Cutoff Chop Saw
- Manufacturer: Cantek
The Cantek CFS100 Automatic Defect Cutoff Chop Saw is the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are ind...
Montoursville, PA - Trusted Seller
SCORTEGAGNA EM 270 R Automatic hack sawing machine
- Manufacturer: Scortegagna
Automatic hack sawing machine Capacity: Ø 270 mm circa
Collegno, Italy - Trusted Seller
UV Cure System
- Manufacturer: Unknown
Confirmed with Fab 15 that there is a broken part on the system. Tool is stored in a stroage room at Tower A in Fab 15. Tool is stored in a storage room on the 1st floor at Tower A in Fab 15. 300mm UV Photoresist...
Bree, Ireland - Trusted Seller
UV Cure System
- Manufacturer: Unknown
Confirmed with Fab 15 there is modification record on the system and there are no missing parts from it. Tool is stored in a storage room on the 1st floor at Tower A in Fab 15. 300mm UV Photoresist Hardening Syst...
Bree, Ireland - Trusted Seller
UV Cure System
- Manufacturer: Unknown
Confirmed with Fab 15 that there is a broken part and modification record. Tool is stored in a storage room on the 1st floor at Tower A in Fab 15. 300mm UV Photoresist Hardening System -Model: UMA-2003-H120F-EM4 ...
Bree, Ireland 
Cantek End Matcher EM12
- Manufacturer: Cantek
CANTEK | EM12 END MATCHER Continuous through feed end matcher producing tongue and groove on flooring & paneling. The Cantek EM12 End Matcher is specially designed for machining tongue and groove (with or without...
Cantek CFS 100 Automatic Defect Cutoff Chop Saw
- Manufacturer: Cantek
CANTEK | CFS100 AUTOMATIC DEFECT CUTOFF CHOP SAW An economical and high-speed approach to defect cross-cutting with partial optimization. The Cantek CFS100 Automatic Defect Cutoff Chop Saw is the perfect upgrad...
CLAW ST11/24
- Manufacturer: ARTIGLIO
Artiglio ST 115 Chuck Column Flywheel diameter 1150 mm. 140 mm flywheel band for blade width 150x1.2x7900 Automatic blade tensioner with input safety sensor Both the flywheels and the blade are lubricated with na...
Bibbiena, Italy
