Building Filters
- Trusted Seller
2000 Northtech HB-700
- Manufacturer: Northtech
Northtech HB-700 Vertical Band Saw w/ Power Feeder 26.5" x 16.5" Northtech HB-700, 27.5" Saw Wheel Diameter, 39" x 27.5" Table Size, 3" Wheel Width, 720 RPM Wheel, 202.8" Blade Length, 10 HP Main Motor, w/ Power ...
Summit, IL 
Northtech NT-12L 12" Tablesaw
- Manufacturer: Northtech
The NT-12L Table Saws employs a rugged steel cabinet and extended steel top for decades of dependable use. The left tilting blade adjustment is easily accessible on the front of the machine with visual angle scal...
Stoneboro, PA
Northtech NT-10L 10" Tablesaw
- Manufacturer: Northtech
The NT-10L Table Saws employs a rugged steel cabinet and extended steel top for decades of dependable use. The left tilting blade adjustment is easily accessible on the front of the machine with visual angle scal...
Stoneboro, PA
Northtech NT16R 16" Tablesaw
- Manufacturer: Northtech
The NT-16R Table Saws employs a rugged steel cabinet and extended steel top for decades of dependable use. The right tilting blade adjustment is easily accessible on the front of the machine with visual angle sca...
Stoneboro, PA- Trusted Seller
Northtech NT PN14 Panel Notcher
Northtech’s NT PN14 panel notcher is specially designed for cutting tall workpieces; the 14″ blades cycle vertically on two precision shafts for perfectly square cuts in material up to 7″ thick. This workhorse is...
Kingston, TN - Trusted Seller
Northtech NT CNC Bandsaw 2500
The Northtech NT CNC Bandsaw 2500 features a band blade swiveling angle +/- 90 degrees and advanced 4-axis CNC control with powerful functions for easy operation and high-efficiency curve cutting without the need...
Kingston, TN 
Northtech SPS10-3 Sliding Panel Saw
- Manufacturer: Northtech
NT-SPS10-3 SLIDING PANEL SAW MAIN MOTOR HP: 7.5 HP VOLTAGE, FREQUENCY: 230/460 Volt 60Hz PHASE: 3 Phase AMP REQUIREMENT: 16.7 / 8.35 Amps FEED SYSTEM: Sliding Table DRIVE SYSTEM: Manual Push of Sliding Table ELEV...
Stoneboro, PA- Trusted Seller
Northtech NT HBR-12E Horizontal Bandsaw
The Northtech NT HBR-12E Horizontal Bandsaw features a 20 HP motor driving the 168″ (L) blade at 6850 FPM. The VFD-controlled 2 HP feed conveyor can be precisely set to speeds between 0 to 97 FPM. The sturdy fram...
Kingston, TN - Trusted Seller
Northtech NT 600A Vertical Band Saw
The Northtech NT 600A Vertical Bandsaw has a 7.5 HP motor, 2” x 208″ blade, and a maximum cut thickness of 13-12″. The 23-3/4” x 26” cast iron worktable is tiltable up to 60 degrees and features a 3-3/4” x 18” fe...
Kingston, TN - Trusted Seller
Northtech NT AW-400PBX Horizontal Bandsaw
The Northtech NT AW-400PBX Horizontal Bandsaw features a powerful 40 HP motor to drive the 2” x 208″ blade at speeds from 4700 – 6750 FPM . The 15-1/4′ (W) feed belt is driven by an inverter-controlled 3 HP motor...
Kingston, TN - Trusted Seller
Northtech NT HBR-300S Horizontal Bandsaw
The Northtech NT HBR-300S Horizontal Bandsaw features a 20 HP soft (Wye-Delta) start motor driving the 170″ (L) blade at 6200 FPM. A 5 HP reversible hydraulic pump smoothly powers the feed conveyor at speeds betw...
Kingston, TN 
Northtech NT HBR-12E Horizontal Bandsaw
- Manufacturer: Northtech
- Phase type: Three-phase
The Northtech NT HBR-12E Horizontal Bandsaw features a 20 HP motor driving the 168″ (L) blade at 6850 FPM. The VFD-controlled 2 HP feed conveyor can be precisely set to speeds between 0 to 97 FPM. The sturdy fram...
Dundee, NY
Northtech, NT-600A Vertical Band Saw
- Manufacturer: Northtech
- Phase type: Three-phase
The Northtech 600a is our entry-level vertical resaw with a robust design that incorporates 24″ band wheels, an oversized work table, a 7.5HP motor, and up to 2″ bandsaw blade for years of dependable performance....
Dundee, NY- Trusted Seller
Northtech 8’ or 16′ Infeed And Outfeed (Tables Only) With Fence, Legs, (1) Gravity Flip Stop
These are a great addition to your Northtech upcut saw. Choose between 8’ or 16′ Infeed And Outfeed Tables. Complete with Fence, Legs, and (1) Gravity Flip Stop.
Kingston, TN - Trusted Seller
Northtech NT HBR-250A-2 Dual-blade Horizontal Resaw Band Saw
This 250 series 20 HP (x2) dual-blade resaw from Northtech can easily handle material up to 11-3/4″ (W)” x 8″ (H). The 1″ (W) x 28″ (Dia.) wheels will securely drive both 1″ and 1-1/4″ blades. The feed conveyor i...
Kingston, TN