Used Forging

2200mm dia x 450mm height Wagner RAW

• Manufacturer: Wagner

Additional info: Radial Drive motor: 300hp Axial Drive motor: 200 hp

3,500mm Ø x 1,200mm H Seonam

Additional info: Min. inside diameter(Mandrel dia.:300mm): 320mm Ring weight: Max. 12,500kgs (27,500 lbs) (Main roll) Diameter: 1300mm Height: 1400mm Rolling speed: Max. 1.5m/sec (Mandrel) Diameter: 300mm Horizon...

45mm diameter Smeral UL 45A Cylindrical type

• Manufacturer: Šmeral Brno
• Model: UL 45

Immediately available Exceptional Condition Moved to storage

1970 1200 ton Hatebur model AMP 70 Hi-Speed

Available for immediate inspection and delivery Dia: 60 mm | Tons: 1,200 tonnes | Builder: Hatebur | Part dia: 125 mm | Max cutoff length: 140 mm | Max die ejector: 130 mm | Part wt: 6 kgs | Min cutoff length: 45...

2006 80mm dia Jaewoo JCP-450

• Manufacturer: Jaewoo

Additional info: Minimum cutting diameter: 28mm Max cutting length: 450mm Minimum cutting length: 50mm Feeding motor power: 2.2 kW Very good working condition Available for immediate inspection and delivery Still...

2015 5/8" x 5" National HS LS-DSSD Warm Header

Additional information: Machine was fully rebuilt in 2015 Complete with: Power Driven Uncoiler with a Multi-Roll Pre-Straightener Ambrell EKOHeat 65/100 65kW Induction Heater new 2013 HYFRA (German) Cooling syste...

Grotnes 7-8-HS-450-12 30″ 12 Jaw Hydraulic Ring Shrinker

Product Description General Info Stock #: 120250066 Location: Decatur,GA Brand: Grotnes Model: 7-8-HS-450-12 Year: 2011 Approx. Shipping Weight: 27,000 lbs Approx. Shipping Dimensions: 20′ L x 8′ W x 7′ H Specifi...

6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height

Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...

1970 1,200 ton Hatebur AMP-70 4-Die, max bar dia

Still installed and under power for inspection Very Good working condition Available for immediate inspection and delivery

1980 440 ton 3-1/2" dia Peddinghaus Caddy 80 Bar

• Manufacturer: Peddinghaus

Additional info: Cutoff capacities at material tensile strengths: Rounds: psi 65,000 - 3.500" psi 92,000 - 3.156" psi 121,000 - 2.750" Squares: psi 65,000 - 3.937" psi 92,000 - 3.562" Flats: psi 65,000 - 7" x 1.3...

1980 1,200 ton National model 6-4 Heavy

• Manufacturer: National

Complete with: Spare parts as follows : (1) Main Electric Motor (2) Adjusting Wedges (1) Upper transfer finger assembly (1) Lower transfer finger assembly (1) Die Block clamping piston This National 6-4 was used ...

3,500mm Asian Built Radial Axial Ring Rolling Mill Re:24925

• Manufacturer: Asian Built

Dia: 3,500 mm | Height: 800 mm | Builder: Asian Built | Radial: 280 tonnes | Axial: 180 tonnes | Min dia: 650 mm | Number of main roll motors, current type & power of each: One DC @ 500kW | Number of axial roll ...

2,800mm Banning RWW H120/V100 CNC

• Manufacturer: Banning

Max Ring diameter - 2,800mm (110") Max Ring height - 500mm (19.7") Radial tonnage - 120 tons Axial tonnage - 100 tons Max Ring Blank weight is 2,000 kg Radial (King) Roll drive power - 315 kW (422 hp) Axial (Edgi...

Grotnes 14-HE-300-12 30″ 12 Jaw Hydraulic Ring Expander

Product Description General Info Stock #: 120250067 Location: Decatur, GA Brand: Grotnes Model: 14-HE-300-12 Year: 2011 Approx. Shipping Weight: 27,000 lbs. Approx. Shipping Dimensions: 20′ L x 8′ W x 7′ H Specif...

Hand Forged Blacksmith Anvil Horn

Traditional forged steel anvil horn piece, exhibiting characteristic hammer marks and working surface. Solid construction with tapered design typical of classic blacksmithing tools. Shows natural patina from use....