Used Mineral Processing

4ft x 11ft 2-Deck Wash Plant

Decks: 2 Decks | Throughput capacity: Approx. 80 YPH | Deck sizes: 4ft Wide x 11ft Long | Drive: Electric Motor | Power output: 1HP | Voltage: 120 Volt | Phase: Single Phase

Agitair Flotation Cells

• Manufacturer: Agitair

Of cells: 2 Cells Per Bank | Drive: Yaskawa Electric Motor (1 Motor Per 2 Cells) | Power output: 20HP | Voltage: 230/460 Volt (Usable at 208 Volt) | Current: 46/23 Amps | Frequency: 60Hz | Phase: 3-Phase

Cone mill liner (bowl liner) part 17502154002 Metso Minerals brand

• Manufacturer: Metso

Cone mill liner (bowl liner) part 17502154002, Metso Minerals brand Manufacturer: Metso For Metso and Sandvik cone crushers Ribbed conical shape Never used

Agitair 4-Cell Flotation Cell

• Manufacturer: Agitair

Of cells: Bank of 4 Cells | Drive: General Electric Motor | Power output: 15HP | Voltage: 230/460 Volt | Current: 42.4/21.2 Amps | Frequency: 60Hz | Phase: 3-Phase

Denver Flotation Cells

• Manufacturer: Denver

With Catwalk Of cells: 2 Cells Per Bank | Drive: WEG Electric Motor (1 Motor Per 2 Cells) | Power output: 10HP | Voltage: 208-230/460 Volt (Usable @ 380 Volt) | Current: 27.9-25.3/12.6 Amps (15.3 A @ 380 Volt) | ...

CPC PUMP AND BALDOR 100 HP MOTOR

• Manufacturer: Baldor - Reliance

stock QR1333 SIZE S3x4x16 S/N 3009G1 TYPE OH4 MODEL VP-CX FLOW 119 GPM HEAD 941 FT. FLANGES 3"-300#RF 4"-300#RF S/N A1406032006 FRAME 405LP RPM 3600 HP 100 VOLTS 575 3 PHASE HZ 60

DILUENT CPC PUMP AND BALDOR 125HP MOTOR

• Manufacturer: Baldor - Reliance

stock QR1313 SIZE S3x6x28 S/N 3009C1 TYPE OH4 MODEL VP-CX FLANGES 3"-300#RF 6"-300#RF S/N A1405302010 FRAME 444LP RPM 1800 HP 125 VOLTS 575 3PHASE HZ 60

CPC PUMP AND BALDOR 25HP MOTOR

• Manufacturer: Baldor - Reliance

stock QR1334 SIZE S2x3x13 S/N 3009H1 TYPE OH4 MODEL VP-CX FLOW 45 GPM HEAD 417 FT.680 150 0.64 API 610 23, 65 FLANGES 2"-300#RF 3"-300#RF S/N B982230-040001 FS FRAME 284LP RPM 3600 HP 25 VOLTS 575 3 ...

CPC PUMP AND BALDOR 75 HP MOTOR

• Manufacturer: Baldor - Reliance

stock QR1331 SIZE 3x4x13 S/N 3009J1 TYPE OH4 MODEL VP-CX FLOW 377 GPM HEAD 690 FT.755 MAWP 600 FLANGES 3"-600#RF 4"-600#RF S/N A1408142111 FRAME 365LP RPM 3600 HP 75 VOLTS 575 3 PHASE HZ 60

Grinding and flotation plant for 60 tons

• Manufacturer: Sin Marca

Grinding and flotation plant for 60 tons Basic equipment data Approximate capacity: 60 tons (I presume 60 tons of ore per shift or per day: it's worth clarifying) Condition: Used PCV Components and specifications...

Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636

• Manufacturer: Hardinge

32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...

Mill, Sag, 13'6" X 4', Marcy, No Motor, #D739647

• Manufacturer: Marcy

Marcy Dry Grind SAG Mill, 13' 6" Diameter x 4' Long. Includes bull gear, pinion gear, large Falk gearbox, air clutch, and lube set. No motor. Manufactured new in 1988.

Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644

• Manufacturer: FL Smidth

Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.

Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643

• Manufacturer: Metso

Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...

Spinktek ST-11-3 Disc Filter, Stainless Steel #4444671

• Manufacturer: Spinktek Systems

Spintek Systems Model number ST-11-3 stainless steel disc filter. Equipment is driven by under-mounted drive, direct connected to spinning discs. Rated for 3-phase, 60-cycle, 460 volt, 70 PSI. Unitized on portabl...