- Trusted Seller
2020 Leybold Dryvac DV 200
- Manufacturer: Oerlikon - Leybold
Machine type: Pumps | Machine location: California | Stock #: 322747 | -nominal pumping speed: 210 m3/h | -ultimate pressure: 1 x 10-2 mbar | -back pressure: Max 0.2 bar | -shaft speed: 6,600 rpm | -electrical r...
- Trusted Seller
2022 Generac RG02515JNAX
- Manufacturer: Generac
- Model: RG02515JNAX
25 KW 120/240 Volt 60 Hz 3 Phase Delta High Leg Machine type: Generators | Machine location: New Jersey | Stock #: 438313
- Trusted Seller
Cascade Ovens CDO-5
- Manufacturer: Cascade Ovens
Capacity Volume 4.9 Cubic Ft. / 138 Cubic Liters Interior Dimensions 21” x 19.44” x 20.75”534mm x 494mm x 527mm Exterior Dimensions 34.1” x 28.1” x 38.75”866mm x 711mm x 984mm Temperature Temperature Range +2°C (...
- Trusted Seller
Cascade Ovens CDO-5
- Manufacturer: Cascade
- Model: CDO-5
Capacity Volume 4.9 Cubic Ft. / 138 Cubic Liters Interior Dimensions 21” x 19.44” x 20.75”534mm x 494mm x 527mm Exterior Dimensions 34.1” x 28.1” x 38.75”866mm x 711mm x 984mm Temperature Temperature Range +2°C (...
- Trusted Seller
Whisperwatt DCA-25SSIU2
- Manufacturer: Whisperwatt
- Model: DCA-25SSIU2
-Three Phase Output: 25 KVA, 240/480V, 60.1 A(240V) 30.1A(480V), 60Hz -Single Phase Output: 14.4 kW, 120/240V, 60.1A, 60Hz
- Trusted Seller
Mettler Toledo XC CC
- Manufacturer: Mettler - Toledo
Resolution (max. recommended) 60,000d Ingress Protection IP65 Material Frame: Mild steel powder coated; Load plate: Stainless steel AISI304 Load Plate Surface Ra <= 0,8µm (welding lines excluded) Cable Length 2,5...
- Trusted Seller
Mettler Toledo XC CC
- Manufacturer: Mettler - Toledo
Resolution (max. recommended) 60,000d Ingress Protection IP65 Material Frame: Mild steel powder coated; Load plate: Stainless steel AISI304 Load Plate Surface Ra <= 0,8µm (welding lines excluded) Cable Length 2,5...
- Trusted Seller
1996 BTU TCA52-3-36E24
- Manufacturer: BTU
2000° F Electrical Reqs; 480v 15 Amp KVA 12 Machine type: Ovens | Machine location: Massachusetts | Stock #: 798304
- Trusted Seller
Tindall 772
- Manufacturer: Tindall
Set Up for 32oz containers Machine type: Filling Machines | Machine location: Massachusetts | Stock #: 705630 | Air requirements: 10 CFM at 60 PSI | Fill control: Capable of 6Oz to 6LB with no container no fill f...
- Trusted Seller
2018 ELGi EN15-125
- Manufacturer: ELGi
– 20 HP Machine type: Air Compressors | Machine location: North Carolina | Stock #: 869112 | – hours: 768 hrs. | – pressure rating: 125 psi | – capacity: 68 CFM | – motor: 15 kW | – voltage: 480/230v 3 phase/ 60H...
- Trusted Seller
1992 Johnston PFTA-250-4LG-15S
- Manufacturer: Johnston
250 HP Low Pressure Steam Boiler 440 Volt Machine type: Boilers | Machine location: Missouri | Stock #: 835551
- Trusted Seller
2007 Prime Mover OE35
- Manufacturer: Prime mover
- Model: OE35
Capacity 3000 LBS Machine type: Forklifts | Machine location: North Carolina | Stock #: 858114 | A: 225″ | B: 24″ | C: 24″
- Trusted Seller
Conair 610013K1
- Manufacturer: Conair
Previously used to blend Glass-Filled Polypropylene and polypropylene Manual available upon request
- Trusted Seller
2005 Amba Flex SV-600-1600 (TYPE)
- Manufacturer: AmbaFlex
Amba Flex SV Elevating Spiral Conveyor, 2005 Machine type: Conveyors | Machine location: Stock #: | Stock #: 447201 | – center diameter: 1600 mm (62.99 inches) | – base area dimensions: 2280 mm (89.76 inches) | –...
$4,900 USDChicago, IL - Trusted Seller
2013 American Heating Company (AHC) VGG-30
- Manufacturer: American Heating Company (AHC)
Control panel with Fireye controllers Maxon and Honeywell valves Includes exhaust stack 2 Available, Price For 1
Clamco 6800 Shrink Wrapping Machine
- Manufacturer: Clamco
- Model: 6800
Good condition Clamco 6800 Shrink Wrapping Machines manufactured in 2023. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
