Used Processing in Indiana, USA

Stainless Food Grade Belt Conveyor 96" Wide 28'L 460V 3PH 16 FPM

• Manufacturer: Correa

Conveyor in good used condition. Removed from a working environment. Was used in a food processing plant. All stainless construction. Conveyor consists of 3 sections bolted on 2" stainless tube frame on leveling...

1993 Silvan 30G Air Tank

• Manufacturer: Silvan

BW Sinclair 10" Screw Conveyor Food Grade Dry Bulk Feeder 3PH Belt Drive 128'

• Manufacturer: Sinclair

Screw Conveyor System was removed from a working environment. Was set up as two separate conveyors and ceiling mounted. Includes the hardware that was used. All Stainless food grade material. Lot Includes: (2) 5...

Turbo Chip Conveyor 16"W x 60" Infeed 40-43" Discharge Height No Drive

• Manufacturer: Turbo

If this item ships as Flat Rate Freight please see details in Shipping tab

Hennig 8' 6" Chip Conveyor 16"W x 64" Infeed 19"H Discharge 230/460V 3PH

• Manufacturer: Hennig

Drive type, motor specs: Chain Drive 1/8Hp 230/460V 3PH 120:1 Gearbox Voltage tested at and wired for:: 230V Mfg Date 2018. Serial # H173040-001. If this item ships as Flat Rate Freight please see details in Ship...

Hakusan 8' Chip Conveyor 17"W x 60" Infeed 45-49"H Discharge 230V 3PH

• Manufacturer: Hakusan

Drive type, motor specs: Chain Drive 100W 220V 3PH 400:1 Gearbox. Voltage tested at and wired for:: 230V If this item ships as Flat Rate Freight please see details in Shipping tab

Ryson 1300-400-A1-6 Elevating Spiral Conveyor 16" Belt 2Hp 230/460V 3PH 17' 4"H

• Manufacturer: Ryson

Ryson Model 1300-400-A1-6. Serial 184764. Bed Height (From Floor): Infeed 39" to 44" Top of discharge belt is 17' 4" with legs at minimum height. Conveyor legs are 24-1/2" to 29" height with leveling screws...

Asahi Backward Inclined Centrifugal Blower 21" Impeller 3Ph 5.5kw 230V 5826CFM

• Manufacturer: Asahi

Used, in Good Working Condition, Tested OK. Wired for 230V Impeller is 21" with a 8" ID width. Insulated housing. If this item ships as Flat Rate Freight please see details in Shipping tab

Hytrol 30"W x 75' 3" Grooved Rubber Conveyor Belt Laced 2-Ply Black 2PL100/GP/0

• Manufacturer: Hytrol

New surplus. Laced at both ends. If this item ships as Flat Rate Freight please see details in Shipping tab

Hytrol 190E24 30"x 12' 9" Accumulation Roller Conveyor E24i w/Spur Transfer

• Manufacturer: Hytrol
• Model: 190E24

Rollers set high on frame or below frame?: High If this item ships as Flat Rate Freight please see details in Shipping tab

Hytrol 47.5"W x 722' Grooved Rubber Conveyor Belt 2-Ply Black 49"BW

• Manufacturer: Hytrol

New surplus. If this item ships as Flat Rate Freight please see details in Shipping tab

Interroll 6.400 Joki Drum Motor 138mm x 300mm 38 FPM Conveyor Roller 480V 1/4 Hp

• Manufacturer: Interroll

New old stock. Interroll 180mm grooved roller. 300mm wide Stainless construction. 480V 3Ph 1/4 hp 38 FPM. 13" Between frames 30mm slotted axle. If this item ships as Flat Rate Freight please see details in Shippi...

36"x 36" Steel Ball Transfer 32" Roller Conveyor Rotating Swivel Table Side Load

In Good Used Condition. Ball Transfer Conveyor on 48" Manual Swivel Table with 32" Roller Entry and Exit. Has an air cylinder mounted under the swivel but is not hooked up to anything. 48" Swivel dia. 36"x 36" R...

Centrifugal Blower Backward Incline Fan 14" Wheel 9" In 10x11" Out

• Manufacturer: Guangdong

Used, in Good Working Condition. Removed From a Working Environment. Impeller is 14" Belt driven. This has a 4 kw motor on this unit. If this item ships as Flat Rate Freight please see details in Shipping tab

Steeltek 8' 8" Portable Conveyor 12"Belt Stainless 230/460V Chain Drive 140FPM

• Manufacturer: Steeltek

Motor & Gearbox: Bodine gearmotor 3/4Hp 230/460V 10:1 ratio. Voltage tested and wired for:: 230V If this item ships as Flat Rate Freight please see details in Shipping tab