Used in Wallonia, Belgium

Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM

• Manufacturer: Inductotherm

Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...

Vertical band saw, table 550x550mm, FUHO

• Manufacturer: SAE

Tiltable table 550 x 550 mm, max part height 400 mm, Infinitely variable speed

Chain hoist DEMAG PK5N-F 1000kg

• Manufacturer: Demag
• Model: PK5

220/380V; 1/0.25kW With hook Without plug and control bottle

Chain hoist DEMAG PK10N-F 2000kg

• Manufacturer: Demag
• Model: PK10

220/380V; 1,5/0,35kW With hook with chain box and remot control

Chain hoist DEMAG PK10N-F 1000kg

• Manufacturer: Demag
• Model: PK10

220/380V; 1,5/0,35kW With hook With plug and control bottle

2000 Mobile hydraulic wedge station HOLMATRO

• Manufacturer: Holmatro

Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer

2000 Mobile hydraulic wedge station HOLMATRO

• Manufacturer: Holmatro

Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer

Gear box ladle SENSEBRENNER ±2,5t

Planetary gearbox N° 2453 /GGG60 / 310398 With wheel Ø720mm

2020 Pillar drilling machine EPPLE, GB50V

• Manufacturer: EPPLE

With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...

2022 Cupola filter with cooler GARANT 40.000m³/h

• Manufacturer: Garant

Filter system With discharge screw and motorised double flap With fan With GARANT gas cooler With cooler cleaning, 200Pa, 0.7kW With fresh air flap 1500mm x 350mm With hopper and motorised double flap and big bag...

2009 Amine Gas Washer BGT, 9000 m³/h

• Manufacturer: BGT

Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm

2018 Mixing plant for core sand LORAMENDI 6t/h

• Manufacturer: Loramendi

Consisting of: -1 Sand bunker -1 Temperature control system 4.8t/h -1 Weighing hopper -1 Core sand mixer LORAMENDI; MDR1,5 150kg / filling; 90s mixing time / filling -2 Dosing tanks for resin and hardener -2 Tank...

2018 Ladle heating station NORDIC FURNACES

• Manufacturer: Nordic Furnaces

1 used ladle lid and one brand new one With control board Fits perfectly on HWS casting ladles 2t

2007 Manipulator CLANSMAN, Type C620RB

• Manufacturer: CLANSMANN

Payload: 500kg | Max opening of the tongs: ±1000m | Horizontal speed: 0.9m/s | Vertical speed: 1m/s | Swivelling speed: 60°/s | Hydraulic power: 22kW

Plateau balance KERN 300kg

• Manufacturer: Kern

Dimensions: Length: 550mm; Width: 550mm; Height: 60mm