Used Processing in USA

Crate of Components

• Manufacturer: federal equipment

Crate of Components Crate with used 6" butterfly valves, Swagelock and assorted fittings, etc.

60" Kason Screen, 1 Deck, C/S

• Manufacturer: Kason

60" Kason Screen, 1 Deck, C/S Used 60" Kason screen, model K60-2-CS, carbon steel construction, 1 deck design, on base wiht 1 hp, 230/460 volt motor, serial# KCN-6031.

Russell Sieve, model A16850

• Manufacturer: Russell

Russell Sieve, model A16850 Russell Sieve, model A16850. Serial number AS149.

Blue Tech BT-06 Air Classifying Mill, 20 HP

• Manufacturer: BT

Blue Tech BT-06 Air Classifying Mill, 20 HP Used Blue Tech air classifying mill, model BT-06, stainless steel rotor and classifier wheel, with carbide tip hammers, 20 hp, 230/460 volt main drive, 3 hp, 230/460 vo...

Premier HM-5 SuperMill Media Mill, C/S, 20 HP

• Manufacturer: Premier

Premier HM-5 SuperMill Media Mill, C/S, 20 HP Used Premier SuperMill media mill, model HM-5, carbon steel jacketed chamber and disks, approximately 6.5 liter gross capacity, 5 liter working capacity chamber, mech...

PVA Dispensing Metering Module, Model Endurance

• Manufacturer: PVA

PVA Dispensing Metering Module, Model Endurance Used PVA Meter-Mix dispensing system, model Endurance, setup with Part A and Part B piston pumps with menu-driven HMI to control shot size, mix ratio, flow rate, pr...

2018 Henry Simon HS GPak 430

• Manufacturer: Simon

Equipped With -Sifting chambers with multiple sieve decks -Vibratory drive system -Adjustable sifting screens -Structural steel frame -All Available Manuals

Maron 72

• Manufacturer: Maron

Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 225539 | -bale size: 30″ x 38″ | -cylinder size: 6″ D | -feed opening: 29″ x 27″ | -operating pressure: 2,700 | -motor: 20 HP | -cycle ...

Cumberland 100 HP

• Manufacturer: Cumberland

Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 225284 | -motor: 100 HP | -rotor knives: 3 Twin Shear Knives | -bed knives: 2 | -cutting chamber dimensions: 24″ x 40″ | -screen size: ...

Dings Overbelt Magnet

30" wide by 5' long Dings Overbelt Magnet 30" Wide 5' Long Good rectifier Comes with the stand Buyer responsible to disassemble and transport Selling as-is where-is.

Hoffman NEMA 12 & 13 enclosure 30" W X 36" H X 11" D

• Manufacturer: Hoffmann

ITEM #: 10649 Used Hoffman NEMA 12 & 13 enclosure 30" W X 36" H X 11" D Overall measurement: 30" W. X 36" H. X 11" D, wall mount brackets, and bottom routed conduit holes. Used for process measurement & control....

2007 Guidetti Cable Processing System

• Manufacturer: Guidetti

The 2007 Guidetti Cable Processing System, model Sincro 530C-R, offers an effective solution for granulation and separation tasks. This system, which has been rebuilt and is currently in use, features a granulati...

2017 Otec DF80 Df-series Pharma Drag Finishing Unit 230v-ac

• Manufacturer: OTEC

“Used” Model number: DF80 | Mpn: DF80 | Shipping weight: 1403 lbs | Shipping dimensions: 82 x 56 x 46 in | Reference sku: 1736885

Honeywell C7076A1007 Ultraviolet Flame Detector

• Manufacturer: Honeywell

“SHELF WEAR” Model number: C7076A1007 | Mpn: C7076A1007 | Shipping weight: 7 lbs | Shipping dimensions: 14 x 8 x 7 in | Additional notes: SHELF WEAR | Reference sku: 1701933

Komax ST-40411B Stainless Static Mixer 4in X 10in X 10in

• Manufacturer: KOMAX

“New without Factory Packaging” Model number: ST-40411B | Mpn: ST-40411B | Shipping weight: 295 lbs | Shipping dimensions: 33 x 26 x 19 in | Reference sku: 1067743