Used Welding Equipment in Texas, USA

TAYLOR-WINFIELD Combination Projection & Spot Welder 100 KVA ENE-12-100 AR Metalworking Equipment

• Manufacturer: Taylor Winfield

“Very good working condition” TAYLOR WINFIELD SPOT WELDER; TYPE: ENE-12-100 AR; S# 74136; 100KVA/440V/60HZ; 12" THROAT. The AR designation means this system is adjustable/retractable. This exact system is still m...

Pandjiris 12x12 Manipulator - Used

• Manufacturer: Pandjiris

Used Pandjiris 12x12 Welding Manipulator Power Travel Car Included ModeL: 1100 Serial: 19053X08-2 Built to 12' x 12' 12' of Vertical Lift. Max under Boom to floor 14' 3-3/4" 12' of Horizontal Travel, Built on Lin...

Pandjiris 3,000lb Headstock with Gripper Chuck - New

• Manufacturer: Pandjiris

New Pandjiris 3,000lb Headstock with Gripper Chuck Package Headstock: New Pandjiris Model: HS-30 3,000lb Capacity 30'' x 30'' Square Table 120 Volt Input Variable Speed Rotation NO Tilt 1 Year Warranty Gripper Ch...

New Koike Aronson 3,000lb Positioner with Chuck

• Manufacturer: Koike Aronson

New Koike Aronson 3,000lb Positioner with Chuck Positioner: New Make: Koike Aronson Model: MD-30 3,000lb Capacity @ 6'' C.O.G. 0.1 - 2 RPM Variable Speed Range 30'' x 30 Square Table Powered Gear Tilt Height Adj...

Preston Eastin 6x6 Manipulator and Subarc Package

Used Preston Eastin 6x6 Manipulator and Subarc Package Preston Eastin 6x6 Manipulator 6ft of Vertical Lift 6ft of Variable Speed Horizontal Travel Complete Lincoln 600A Subarc Package IdealArc DC-600 Power Source...

Pandjiris Model B Chuck - New

• Manufacturer: Pandjiris

Pandjiris Model B Chuck New & Used Available Model: B Capacity: 3,000 Pounds Gripping Diameter Range: I.D.: 5 1/2'' - 44 3/8'' O.D.: 1 1/2'' - 40 3/4'' 3 Jaws

Pandjiris Model A Chuck - New

• Manufacturer: Pandjiris

Pandjiris Model A Chuck New & Used Available Model: A Capacity: 3,000 Pounds Gripping Diameter Range: I.D.: 5 1/2'' - 31 1/4'' O.D.: 1 1/2'' - 27 5/8'' 3 Jaws

Koike Aronson 15" Spin-lock Chuck - New

• Manufacturer: Koike Aronson

15" SPIN LOCK CHUCK KOIKE MODEL WP-400 GRIPPING RANGE 4-3/4" THRU 15" 6.7 INCH CENTER HOLE SHIPPING WEIGHT 49 LB

WeldWire 12x12 Manipulator with Lincoln Subarc Package - Used

• Manufacturer: Lincoln

Used WeldWire 12x12 Manipulator & Subarc Package Manipulator: WeldWire Co Model WEM1212LD 2013 Year Model Powered Travel Car 12 ft of Vertical Travel 12 ft of Horizontal Travel 30' of Track Included 460 Volt Inpu...

Weldwire 8X8 Manipulator - New

8 'X 8' NEW WELDWIRE MANIPULATOR Max height under boom 129" Boom Item Specification Boom Construction Box Boom Ways Angle Boom Drive Type Rack and Pinion Boom Drive HP 1/2 HP...

Pandjiris 3,000 lb Positioner (Fixed Height Base) - New

• Manufacturer: Pandjiris

New Pandjiris 3,000 lb Positioner (Fixed Height Base) New Positioner: Model 30-6 AB 3,000 Pound Capacity @ 6’’ C.O.G. Variable Speed | .046 – 1.40 RPM Powered Gear Tilt | 0 – 135 Degrees 30’’ x 30’’ Table 6...

Profax WP-2000 - New

• Manufacturer: Profax

Model: WP-2000-4 Table Size: 35.5" Primary Voltage: 440 Volts Remote Hand Pendant Variable Speed Footprint: 44" x 37"

Profax 2,000 Pound Positioner with TJ-20 Gripper Chuck – New

• Manufacturer: Profax

Profax 2,000 Pound Positioner with TJ-20 Gripper Chuck – New Positioner: New Profax 2,000 Pound Positioner Model: WP2000-4 2,000 Pound Capacity 460 Volt Input Power Speed Range: 0.1 – 1.2 RPM Chuck: New Pan...

Profax 1,000 lb Positioner with 20” Chuck - New

• Manufacturer: Profax

New Profax 1,000 lb Positioner with 20” Chuck Positioner: New 2022 Profax 1,000 lb Positioner Model: WP1000 1,000 Pound Capacity Powered Gear Tilt Variable Speed Rotation 120 Volt Input Hand Pendant and Fo...

Koike Aronson HD-500 VF - Used

• Manufacturer: Koike Aronson

KOIKE ARONSON YEAR MODEL 2013 HD-500 VF SERIAL NUMBER 48732 CAPACITY 50,000 LBS. MAX LOAD TORQUE: 600,000 LB. IN. ROTATION 1,037,000 LB. IN. TILT 84" X 84" SQUARE TABLE 460 VOLT INPUT 45 F. L. AMPS MITSUBISHI D70...