Building Filters
SCM Panel Saw Model Nova Si X
- Manufacturer: SCM / SCMI
Maximum saw blade diameter with scoring unit installed mm 400 Max. sawblade projection from table at 90°/+45°/-45°mm 136/97/60 Cutting width on parallel fence mm 1270 Squaring stroke mm 3200÷ kW7 (overhead guard ...
St Helens, United Kingdom
SCM Model TF130-PS Class Spindle Moulder with Integrated Sliding Table
- Manufacturer: SCM / SCMI
Max. useful spindle length mm / inches 180 / 7 Spindle speed rpm 3000/4500/6000/7000/10000 Max. diameter of the profiling tool 250 / 9.8 Max. tool diameter retractable under the table at 90° 320 / 12.6 Max. diame...
St Helens, United Kingdom
SCM Compact XL 4 Head Planer/Moulder,
- Manufacturer: SCM / SCMI
SCM Compact XL 4 head Planer/Moulder, with Tersa Block, with Moulding on Both Side Heads, Top Head . Excellent Condition. . numerical readouts to all movements pneumatic pressures 2 feed speeds bed lube 2m infeed...
SCM SI400 EP Nova Sliding Table Panel Saw
- Manufacturer: SCM / SCMI
- Model: SI400EP
Electronic Version Upper Mobile Control Panel “READY 3 UP” Plus Version Powered Parallel Fence With Electronic Programmer Continuous Adjustments By Push Buttons Possibility Of Incremental Positions Automatic Set-...
St Helens, United Kingdom
SCM L’invincibile Model FS7 Combined Planer Thicknesser. Xylent Spiral Cutterblock
- Manufacturer: SCM / SCMI
- Model: Linvincibile
Ready Electronic Control Simultaneous lifting and locking of surface tables with a mechanical safety device Speedy setting up for changeover from surfacing to thicknessing. Rubber-coated outfeed roller Interchang...
St Helens, United Kingdom
SCM Nova SI40 Programmable Sliding Table Panel Saw
- Manufacturer: SCM / SCMI
Max. saw blade diameter 400mm Max. sawblade projection from table at 90°/45° 138/98mm Cutting width on parallel fence 1270mm Squaring stroke 3200mm Three-phase motor 7.5hp Ready 3 Electronic control. Powered and ...
St Helens, United Kingdom
SCM Profiset 40 4 Sided Planer with 2300mm Pre-Straightening Infeed Table
- Manufacturer: SCM / SCMI
Bringing high degrees of functionality, ergonomics and robustness, the SCM Profiset 40 Planer with 2300mm Pre-Straightening Infeed Table is a high-end machine worthy of the most professional craftsmen. The high q...
St Helens, United Kingdom
SCM Formula Feed 48 – 4 Roller Feed Unit
- Manufacturer: SCM / SCMI
- Model: Formula
Horsepower/Rotation 1 HP (0.75 KW), 1 or 3 phase ; Forward / Reverse Range of Speeds (50Hz) (60Hz) 4/8/10/20 M/min (13/26/33/66 FPM) Optional Speeds (w/extra gear set)3/6/13/26 M/min (10/20/43/85 FPM)Rollers(Belt...
$1,070 USDSt Helens, United Kingdom
SCM SI400 Nova 3.2m Panel Saw. SPECIAL PROMOTION
- Manufacturer: SCM / SCMI
- Model: SI400
ova 3.2m Panel Saw CE Conformity Max. Cutting Height At 90° 140mm (With 400mm Blade) Blade Tilt (Degrees) 45° Max. Cutting Height At 45° 97mm (With 400mm Blade) Blade Lift & Tilt Manual Rip Fence Capacity 1270mm ...
SCM L’invincibile Model SI X Panel Saw
- Manufacturer: SCM / SCMI
- Model: Linvincibile
Machine type electronic programmed Squaring capacity with carriage and extended stop mm3200x3200 Blade tilting +/- 46° Main blade rotating speed rpm 2800 ÷ 4200 Scoring blade rotating speed rpm 6000 Cutting heigh...
St Helens, United Kingdom
SCM Formula Feed 38 – 3 Roller Feed Unit
- Manufacturer: SCM / SCMI
- Model: Formula
Horsepower/Rotation 1 HP (0.75 KW), 1 or 3 phase ; Forward / Reverse Range of Speeds (50Hz) (60Hz) 2/4/5.5/7/11/13/16.5/33 M/min (6.5/13/18/22/36/43/55/108 FPM) Rollers Φ120 x 60 mm x 3 pcs (Φ4-3/4” x 2-3/8” x 3 ...
$922 USDSt Helens, United Kingdom
SCM SI350 Class 3.2m Sliding Table Panel Saw
- Manufacturer: SCM / SCMI
Lifting & tilting of the saw unit by hand wheels Eccentric Clamp Squaring Fence Outfeed table extensions Direct Start of main motor with push buttons Independent Powered Scoring Unit Overhead Gantry Saw guard Rip...
St Helens, United Kingdom
SCM Minimax Model SC2c Panel Saw 1 Phase
- Manufacturer: SCM / SCMI
- Model: Minimax SC 2C
Max. sawblade diameter mm315 Max. sawblade projection from the table at 90°/45° mm100/78 The cutting width on parallel fence mm 900 ÷ (1270 Option) Belt driven scoring unit (OPTION) Rip fence capacity 1270mm (OPT...
$4,964 USDSt Helens, United Kingdom
SCM Sandya 1K CS Single Head Sander, Excellent Condition
- Manufacturer: SCM / SCMI
- Model: Sandya
SCM Sandya 1KCS Single Head Sander with Combination Head, Roller & Pad, To Ce Regs. 2 roller infeed & outfeed power rise & fall with numerical readout auto table positioning device
SCM Ti 5-LL L’invincibile Programmable Tilting Spindle Moulder with HSKB63 Tool Holders
- Manufacturer: SCM / SCMI
- Model: Linvincibile
Top of the range Programmable Spindle Moulder from SCM Linvincibile Overhead control panel with “EYE-S” touch control Fences flex type auto adjustment Raise, lower, Tilt of spindle +45 50 deg -45 50 deg Fast sect...
St Helens, United Kingdom
SCM / SCMI Record 310 Wood CNC Machining Center
- Manufacturer: SCM / SCMI
- Model: Record 310
Good condition SCM / SCMI Record 310 Wood CNC Machining Centers manufactured in 2006. Located in Italy and other countries. Click request price for more information.
Italy