Used Electrical Test Instruments in Gauteng, South Africa

TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2

• new

• Manufacturer: LiSN

The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...

TBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2

• new

• Manufacturer: LiSN

The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...

Coupling Decoupling Network M3

• new

The TBCDN-M3 is a Coupling Decoupling Network for conducted immunity testing according to IEC 61000-4-6. The TBCDN-M3 is compliant with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance sig...

Snap On 32 mm up to 750 MHz

• new

The TBCP2-250 is a snap-on RF current monitoring probe. The probe has a very flat response with a 3dB bandwidth of 250 MHz and is characterized over the frequency range from 30kHz to 300 MHz. Upon request, it can...

FiberMASTER Series – Power Meter

• new

The TREND FiberMASTER™ fibre optic testing kit allows the user to measure absolute power and calculate the loss of fibre optic links at several wavelengths. Absolute power measurements are helpful when trouble sh...

TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F

• new

• Manufacturer: LiSN

The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...

Deviser EP310 Series PON Power Meter

• new

The EP310 is a passive optical network (PON) power meter that enables users to quickly validate PON network installations. It measures 3 wavelengths (1310/1490/1550 nm) at once, with user-defined limits and USB d...

TESCA Wiring Specimen Board

• new

Wiring specimen board have been designed specifically to study different types of cables & wires. With help of this trainer student can make easy understanding with different kind of wires & cables. It consists f...

ShinewayTech OPM-15A -70~+10dBm Optical Power Meter

• new

Grandway FHP2B04 Optical Power Meter ::: -50 to +26dBm

• new

Optical Power Meter -50 to 26dBm Calibrated wavelength: 850/1300/1310/1490/1550/1625nm | Detector type: InGaAs | Accuracy: ±0.2db±1nW | Resolution: 0.01dB | Linearity: ±5% | Auto power-off: Yes | Back-light: Yes ...

Chauvin Arnoux PEL103 | Power and Energy Loggers

• new

• Manufacturer: Chauvin Arnoux

Ergonomic, magnetized and suitable for all types of cabinets, PEL103 loggers provide all the power and energy measurements simultaneously.

Chauvin Arnoux CA6416 Clamp-on Ground Resistance Tester

• new

• Manufacturer: Chauvin Arnoux

Deviser EP350 PON Power Meter -30~+13dBm

• new

The power meter has a variety of options to meet customers’ specific requirements. Customers can choose between single- or dual-layer PON testing and RF overlay supporting RF video. Main technical specifications ...

Grandway OLT55-AHR – Optical Return loss tester

• new

It can perform automatic bidirectional loss test on single fiber with Pass/Fail assessment. With rich functions, flexible configuration and excellent user friendly design, OLT-55 is the ideal optical loss tester ...

TBOH01 5 µH, 10A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025

• new

• Manufacturer: LiSN

The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserte...