Used Processing in Lower Silesian, Poland

Trusted Seller
MAYER & MAYER DXR R2020R L-P-PUB PDX20 40-100 P
- Manufacturer: Mayer
of German manufacture was manufactured in 2015. The device is a filling station for hand-held dispensers with two-component glue with low and medium viscosity. The glue is loaded from pails or drums with a capaci...
$12,399 USD
Get financing
Est. $243/mo
Jelenia Góra, Poland
Trusted Seller
ATLAS COPCO FX 7
- Manufacturer: Atlas-Copco
- Model: FX 7
was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...
$1,929 USD
Jelenia Góra, Poland
Trusted Seller
BATTENFELD TM 1300
- Manufacturer: Battenfeld
was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...
$4,133 USD
Jelenia Góra, Poland
2007 Wanner C13.20sv
- Manufacturer: Wanner
- Model: C1320SV
Rotor knives: 9Stator knives: 2Rotor diameter: 130 mmRotor width: 200 mm
Wrocław, Poland
2007 Wanner C17.26 SV
- Manufacturer: Wanner
Number of rotating knives - 12 pcs. Efficiency - max ca 20 kg/h Rotation per minute of the rotor - 224 rpm
Wrocław, Poland
2007 PMS HRC-X12
- Manufacturer: PMS
Number of zones: 12
Wrocław, Poland
2019 Motan Metro Mes 10-1
- Manufacturer: Motan
Efficiency: up to 10kg/h | Power: 1-fazowe
Wrocław, Poland
2004 Engel DUO 11050/2300
- Manufacturer: Engel
Core drive: 2 hydraulic Cascades: 10 hydraulic (installed in the machine, expandable) Mould heating zones: 36 Plate type: magnetic (Tecnomagnete) Option: double injection and mould tilting system Control language...
Wrocław, Poland
2015 Krauss Maffei KM 1600 – 17200 MX
- Manufacturer: Krauss-Maffei
Krauss Maffei KM 1600 – 17200 MX Injection Molding Machine. Year of manufacture: 2015. General description: Modern injection molding machine with a fully hydraulic clamping system. Equipped with the advanced MC6 ...
Wrocław, Poland
2015 Krauss Maffei KM 900 – 8100 GX
- Manufacturer: Krauss-Maffei
Krauss Maffei KM 900 – 8100 GX Injection Molding Machine, Year of Manufacture: 2015 General Description: Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions on the fixed platen and 4 control...
Wrocław, Poland
2010 Battenfeld HM 110/350
- Manufacturer: Battenfeld
1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakit UNILOG B6 consisting of:- 07.D00 adjustment elements,- 02.K02 time-controlled air valve- 01.C01 hydraulic control of the NW 6 core on the cl...
Wrocław, Poland
2010 Netstal SynErgy 2400-1700
- Manufacturer: Netstal
- Model: SYNERGY 2400-1700
Short circuit force [kn]: 2400 | Min./ max. mold height [mm]: 260 - 600 | Maximum opening width [mm]: 1110 | Screw diameter [mm]: 62 - 25D | Injection volume [cm3]: 749 | Injection weight [g]: 696 | Injection pr...
Wrocław, Poland
2010 Krauss Maffei KM 80 - 380 CX
- Manufacturer: Krauss-Maffei
- Model: KM80-380CX
Man hours: 35100 | Short circuit force [kn]: 800 | Dimensions of mounting plates (hxv) [mm]: 670 x 670 | Clearance between columns (hxv) [mm]: 420 x 420 | Min./ max. mold height [mm]: 250 | Maximum opening width...
Wrocław, Poland
2001 Krauss Maffei KM 800-5000 MC
- Manufacturer: Krauss-Maffei
- Model: KM800-5000MC
Man hours: 68000 | Short circuit force [kn]: 8000 | Dimensions of mounting plates (hxv) [mm]: 1610 x 1530 | Clearance between columns (hxv) [mm]: 1120 x 1000 | Min./ max. mold height [mm]: 600 | Maximum opening ...
Wrocław, Poland
2005 Battenfeld TM 3500/1900
- Manufacturer: Battenfeld
- Model: TM 35001900
Man hours: 105826 | Short circuit force [kn]: 3500 | Dimensions of mounting plates (hxv) [mm]: 1100 x 1060 | Clearance between columns (hxv) [mm]: 800 x 710 | Min./ max. mold height [mm]: 375...710 | Maximum ope...
Wrocław, Poland