Semiconductors » Semitool » California

Building Filters

Related Events

Live Now

Make Offer | Automated Assembly Equipment From Dexcom

by AllSurplus

Online
Ends Jan 31st, 14:00 CST
View event
121

Used Semitool Semiconductors in California, USA

  • Trusted Seller
    Semitool 4400-S Spin Rinse Dryer

    Semitool 4400-S Spin Rinse Dryer (SRD)

    • Manufacturer: Semitool

    The Semitool 4400 SRD is a Doublestack Spin Rinse Dryer (SRD) with 2 Process Chambers, fully refurbished to ‘Like New’ condition. Two redundant Head Assemblies ensure Uninterrupted Operation, allowing you to perf...

    Rocklin, CA
  • Trusted Seller
    9 Position Manifold for DI

    9 Position Manifold for DI Water on SITEK & Semitool 280 SRDs

    • Manufacturer: Semitool

    This 9-position DI water manifold is most commonly mounted to the top of Semitool 280 bowl assemblies on SITEK / Semitool / Rhetech Spin Rinse Dryers. 9 outlet positions for DI water delivery Typically used with ...

    Rocklin, CA
  • Trusted Seller
    8 Position Manifold for DI

    8 Position Manifold for DI Water on SITEK & Semitool 260 & 270 SRDs

    • Manufacturer: Semitool

    This 8-position DI water manifold mounts to the top of Semitool 260 and 270 bowl assemblies on SITEK / Semitool / Rhetech Spin Rinse Dryers. 8 outlet positions for DI water flow Designed for 260 and 270 bowl conf...

    Rocklin, CA
  • Trusted Seller
    Motor Isolator for SITEK &

    Motor Isolator for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    Gray Motor Vibration Isolator, also called a Rubber Mount, used on SITEK, Semitool & Rhetech Spin Rinse Dryers. This natural rubber mount is designed for compression loads of 37 to 86 lbs. Thread Size: 5/16-18 SI...

    Rocklin, CA
  • Trusted Seller
    Motor Isolator for SITEK &

    Motor Isolator for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    Motor Vibration Isolator — also called a Grommet. Used on SITEK / Semitool / Rhetech Spin Rinse Dryers Natural rubber isolator: 1″ diameter x 1″ (2) 5/16-18 thread x 9/16″ long For compression loads: 37 to 86 lbs...

    Rocklin, CA
  • Trusted Seller
    Ferrofluidic Oil for SITEK &

    Ferrofluidic Oil for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    Ferrofluidic oil is used to lubricate the ferrofluidic seal on systems with a brush-type motor. This oil is sold in a 1cc bottle and is compatible with SITEK / Semitool / Rhetech Spin Rinse Dryers. SITEK Part Num...

    Rocklin, CA
  • Trusted Seller
    Heater Blankets for SITEK &

    Heater Blankets for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    SITEK offers high-quality replacement heater blankets for SITEK and Semitool Spin Rinse Dryers (SRDs), designed for consistent and reliable operation. All 255W heater blankets measure 6″ x 7.75″, feature 13″ lead...

    Rocklin, CA
  • Trusted Seller
    Front Motor Bearing for SITEK

    Front Motor Bearing for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    This motor bearing is designed for use in Semitool/Rhetech Spin Rinse Dryer (SRD) systems with Pacific Scientific motors. Installed on the front side near the drive plate, this bearing ensures smooth operation an...

    Rocklin, CA
  • Trusted Seller
    Back Motor Bearing for SITEK

    Back Motor Bearing for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    This motor bearing is designed for use in Semitool/Rhetech Spin Rinse Dryer (SRD) systems with Pacific Scientific motors. Installed on the front side near the drive plate, this bearing ensures smooth operation an...

    Rocklin, CA
  • Trusted Seller
    Slinger Ring for SITEK &

    Slinger Ring for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    Slinger Ring for SITEK / Semitool / Rhetech Spin Rinse Dryer Slinger ring (also known as Sling Seal) is located directly behind the rotor drive plate. Past Possible Part Numbers: 03-230105 10776-501 SITEK Part Nu...

    Rocklin, CA
  • Trusted Seller
    QD Rotor Shaft for SITEK

    QD Rotor Shaft for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    This rotor drive shaft is used on SITEK, Semitool, and Rhetech Spin Rinse Dryers. It is inserted through the center of the motor and secures the rotor with a single mounting bolt, providing stable rotation and re...

    Rocklin, CA
  • Trusted Seller
    LC-5 Servo Amp for SITEK

    LC-5 Servo Amp for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    This is a refurbished and upgraded LC-5+ controller for use on S Model Semitool Spin Rinse Dryers wired for 220V/240V power. While the outer black housing remains original, all internal components—including the C...

    Rocklin, CA
  • Trusted Seller
    Cone Spray Nozzle for SITEK

    Cone Spray Nozzle for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    Cone Spray Nozzle for DI Water Manifold on SITEK / Semitool / Rhetech Spin Rinse Dryer This Kynar cone spray nozzle is mounted in the DI water manifold of Spin Rinse Dryers and delivers a wide-angle spray onto th...

    Rocklin, CA
  • Trusted Seller
    LC-4 Servo Amp for SITEK

    LC-4 Servo Amp for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    This new SITEK Servo Amp, is designed as a direct replacement for the discontinued LC-4 Servo Amp, used in S-Model Systems wired for 110V-120V power. It replaces legacy Automotion Control/Electrocraft models LC4B...

    Rocklin, CA
  • Trusted Seller
    Rotor Stop Positioner (RSP) for

    Rotor Stop Positioner (RSP) for SITEK & Semitool SRDs

    • Manufacturer: Semitool

    This new SITEK-designed Rotor Stop Positioner (RSP) is a direct replacement for the OEM RSP used in Semitool Systems. It is used to index the cam and rotate the rotor to the upright position when the motor stops ...

    Rocklin, CA
  • no-image_en.png

    Semitool PSC-102 Surface Treatment / Cleaning

    • Manufacturer: Semitool
    • Model: PSC-102

    Good condition Semitool PSC-102 Surface Treatment / Cleanings. Located in USA and other countries. Click request price for more information.

    USA
12345