Building Filters

25

Used ds in Upper Austria, Austria

ISEMT - DS CONTROL TRANSFORMER
- used
- Manufacturer: ISEMT
Control: conventional | Freight basis: In stock
Niederkappel, Austria
SBA TA61833/2 3X380V DS CONTROL TRANSFORMER
- used
- Manufacturer: SBA
Control: conventional | Freight basis: In stock | Additional number: 206-013
Niederkappel, Austria
Bürkle Schöck DX 3051 380V+-5% / DS-STEUERTRAFO
- used
- Manufacturer: Bürkle
Control: conventional | Freight basis: In stock | Dimension: 750VA
Niederkappel, Austria
Bürkle Schöck DX 3041 380V/ 1 DS-STEUERTRAFO
- used
- Manufacturer: Bürkle
Control: conventional | Freight basis: In stock | Dimension: 587VA | Additional number: 86.4666
Niederkappel, Austria
1983 BATTENFELD BSKM 170/46-S-DS Injection blow molding machine
- used
- Manufacturer: Battenfeld
- Screw Diameter: 35 mm
another auger is in stock + spare parts Control: conventional | Screw diameter: 35 mm | Platen: 480 x 480 mm | Displacement: 86.6 cm³ | Injection weight in polysterol: 78.8 g/hp | Closing force: 460 kN | Engine p...
Niederkappel, Austria
LOHER FOR MOTOR BAL100L1A- COMPLETE BRAKE F.DS
- used
- Manufacturer: Loher
Control: conventional | Freight basis: In stock | Dimension: 24V 32NM
Niederkappel, Austria
Auction
Neopost - Test machine, practically NEW! - DS 180i - Envelope Inserters - 2020
- used
- Manufacturer: Neopost
Neopost DS 180i inserting machine from test position, practically NEW, hardly used, only 17,245 inserts at the counter!! The unit was fully inspected by a legitimate technician on 5/19/25 and is in absolutely min...
Linz, Austria
Visit Auction Website
MATRA DS200.1 Brake current turning and grinding machine
- used
- Manufacturer: Matra
- Model: DS2001
Control: conventional | Freight basis: in stock | Turning diameter: / mm | Turning length: / mm | Workpiece length: / mm
Niederkappel, Austria
Dr. Henschen DS2350 Contact pressure gauge
- used
- Manufacturer: Dr. Henschen
100 bar, rear connection Control: conventional | Freight basis: In stock
Niederkappel, Austria
Automatic packing pressDS-A 700
- used
Triple compaction in one baling cycle Thanks to the technically sophisticated baling system, these baling presses with four cylinders compact from three sides in one baling cycle. This sensational innovation ensu...
Seewalchen am Attersee, Austria
Automatic packing pressDS-A 2200
- used
Enormous forces for punching waste This compact, newly developed system utilizes the power of 4 separate cylinders in each pressing cycle and therefore compacts exceptionally well, even with pre-shredded punching...
Seewalchen am Attersee, Austria
Bernardo Surface planer and thicknesser PT 305 DS with aspiration / 230 V
- new
- Manufacturer: Bernardo
- Model: PT 305
The PT 305 DS planer and thicknesser offers a wide range of standard accessories, including an integrated dust extractor, waste bag and carriage, making this model unbeatable in price-performance ratio for the pr...
$1,500 USD
Linz, Austria
Bernardo Surface planer and thicknesser PT 305 DS with aspiration / 400 V
- new
- Manufacturer: Bernardo
- Model: PT 305
The PT 305 DS planer and thicknesser offers a wide range of standard accessories, including an integrated dust extractor, waste bag and carriage, making this model unbeatable in price-performance ratio for the pr...
$1,500 USD
Linz, Austria
2025 EP DS3 NEUMASCHINE
- used
- Manufacturer: EP
- Model: DS3 NEUMASCHINE
Used forklift no.: ZSDS33000 | Type of drive: electric | Load capacity: 1500 kg | Mast: duplex | Lifting height: 3000 mm | Building height: 2067 mm | Fork length: 1150 mm
Lambach, Austria
2025 EP DS3 NEUMASCHINE
- used
- Manufacturer: EP
- Model: DS3 NEUMASCHINE
Used forklift no.: ZSDS33300 | Type of drive: electric | Load capacity: 1500 kg | Mast: duplex | Lifting height: 3300 mm | Building height: 2217 mm | Fork length: 1150 mm
Lambach, Austria

12