Machine Tools » Sheet Metal Processing » Germany

Search By Manufacturer

Search By State

Search By Type

Building Filters

984

Used processing in Germany

  • Trusted Seller
    Weingarten UZH 80

    Weingarten UZH 80

    • Manufacturer: Weingarten

    This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 p...

    Leipzig, Germany
  • Trusted Seller
    1995 Schröder Ducter 1500

    1995 Schröder Ducter 1500

    • Manufacturer: Schroeder
    • Power requirement: 2 kW

    CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation...

    Leipzig, Germany
  • Trusted Seller
    1991 HEIDEL MB W 140

    1991 HEIDEL MB W 140 OP 4

    • Manufacturer: HEIDEL
    • Power requirement: 25 kW

    CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upp...

    Leipzig, Germany
  • Trusted Seller
    1986 VEB ELEKTROTECH.GERAETE 4 F

    1986 VEB ELEKTROTECH.GERAETE 4 F - 6150

    • Manufacturer: VEB ELEKTROTECH.GERAETE
    • Power requirement: 1.5 kW

    Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...

    Leipzig, Germany
  • Trusted Seller
    1970 straightening machine DDR BETRIEB nicht

    1970 straightening machine DDR BETRIEB nicht bekannt

    • Manufacturer: DDR BETRIEB
    • Power requirement: 1.2 kW

    straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.

    Leipzig, Germany
  • Hämmerle AP200-3100

    Hämmerle AP200-3100

    • Manufacturer: Hämmerle

    Designation of the plant: Used press brake | Folding: 3100mm | Pressure force: 200t | Hub: 400mm | Length: 4350 | Width: 2200 | Height: 3400 | Mass: 18500kg | Bullet performance: 26,5kW / 380V | Duty date: By ar...

    Frankfurt, Germany
  • Hidroliksan HD100

    Hidroliksan HD100

    • Manufacturer: Hidroliksan

    designation of the plant / description New hydraulic workshop press New hydraulic workshop press gt table size / working area / working size 1010 x 300 motor power (kw) / motor power (kw) 4 kW down speed 7.12 mm/...

    Frankfurt, Germany
  • Hidroliksan HD180

    Hidroliksan HD180

    • Manufacturer: Hidroliksan

    designation of the plant / description New hydraulic workshop press table size / working size 1550x550mm motor power (kw) / motor power (kw) 7,5 kW down speed 8 mm/s return speed 13,3 mm/s dimensions l x w x h / ...

    Frankfurt, Germany
  • 2000 Adige, BLM LT651

    2000 Adige, BLM LT651

    • Manufacturer: Adige

    REIS Robotics linear handling for stacking, HRL26 robot incl. gripper Machine data for the entire system (manufacturer's data): (Laser cutting head was exchanged in 2015, current operating hours 37,407h) Optical ...

    Frankfurt, Germany
  • SH-Germany SAL 28

    SH-Germany SAL 28

    • Manufacturer: SH-Germany

    machine designation / machine model LAS 28 length of fiber optic cable / fiber cable length 2.5m wavelength / marking wavelength 1064nm laser repetition frequency / laser repetition frequency ≤100kHz marking dept...

    Frankfurt, Germany
  • SH-Germany SAL28 XL

    SH-Germany SAL28 XL

    • Manufacturer: SH-Germany

    machine model / machine model SAL 28 length of fiber cable / fiber cable length 2.5m wavelength / marking wavelength 1064nm laser repetition frequency / laser repetition frequency ≤100kHz to mark depth (depth of ...

    Frankfurt, Germany
  • 2003 I.MA.L CESO1A Speed 64

    2003 I.MA.L CESO1A Speed 64

    • Manufacturer: Imal

    Press safety inspection according to BGR 500 according to the test report. Next inspection in January 2026.

    Frankfurt, Germany
  • 1991 Hämmerle AP 100 2100

    1991 Hämmerle AP 100 2100

    • Manufacturer: Hämmerle

    without tools Designation of the plant: Used press brake | Max. pressing force: 1000KN | Max working length: 2100mm | Max. stroke: 400mm | Discharge: 300mm | Mass weight: 11500kg | Operating voltage: 380V 50Hz | ...

    Frankfurt, Germany
  • 2007 Finnpower LP6

    2007 Finnpower LP6

    • Manufacturer: Finnpower

    operating hours = switch-on time (june 2024) 15137 h information on order confirmation when purchasing 3 clamping claws with central locking system programmable clamp positioning (pcs) brush tables 18 stationary ...

    Frankfurt, Germany
  • Hidroliksan HD160

    Hidroliksan HD160

    • Manufacturer: Hidroliksan
    • Model: HD160

    designation of the plant / description New hydraulic workshop press table size / working size gt 1100x350mm motor power (kw) / motor power (kw) 5.5 kW down speed 6,2 mm/s return speed 9,8 mm/s dimensions l x w x ...

    Frankfurt, Germany
1819202122

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.