Building Filters
- Trusted Seller
Heinz Mayer MSL90-P25-R-220 linear unit MSL 90-P25-R220 | Linear technology H220
- Manufacturer: Mayer
4-PD Age rating: No age restrictions | Content: 1 piece | Item condition: Second hand
$518 USDBorken, Germany - Trusted Seller
1998 AKYAPAK 1030 x 70
- Manufacturer: Akyapak
Additional Information Brand new, manually operated three-roll bending machine, asymmetrical roll arrangement Further Information This machine comes from a remaining stock.
Wiesbaden, Germany 
WMT HR 300
- Manufacturer: WMT
Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm
Velen, Germany
WMT 305-1
- Manufacturer: WMT
Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 305 x 1mm
Velen, Germany
HBM 1015-1
- Manufacturer: HBM - Hottinger
- Model: 1015-1
Control: conventional | Delivery: ab Lager | Material width: 1015 mm | Material thickness: 1 mm | Speed: von Hand | Weight: 240 Kg | Dimensions: 1420 x 600 x 750 m
Velen, Germany
WMT 1000 HDTR
- Manufacturer: WMT
- Power requirement: 0.6 kW
roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English
Velen, Germany
WMT 1000 HDTR
- Manufacturer: WMT
- Power requirement: 0.6 kW
roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English
Velen, Germany
2009 AYEL-TECH PK 35
- Manufacturer: AYEL-TECH
- Power requirement: 1.5 kW
Profile bending machine with: - Foot pedal for right/left rotation - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation
Velen, Germany
MEGEY BM-M-125
- Manufacturer: MEGEY
- Power requirement: 0.75 kW
Flanging machine is equipped with: - Emergency switch - Footswitch - 8 pcs. Roll sets
Velen, Germany
OSTAS KMRP-1,2
- Manufacturer: Ostas
- Power requirement: 0.75 kW
Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets
Velen, Germany
MEGEY PK 35
- Manufacturer: MEGEY
- Power requirement: 1.5 kW
Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven
Velen, Germany
TUGRA PK 40
- Manufacturer: TUGRA
- Power requirement: 1.1 kW
Electric profile roller - Either horizontal or vertical working - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm / 1 " - Operation manual - Foot swi...
Velen, Germany
UWM UWM 1000
- Manufacturer: UWM
- Model: 1000
- Power requirement: 0.23 kW
Control: conventional | Delivery: ab Lager | Weight max.: 1000 Kg | Workpiece diameter: 20 - 800 mm | Drum diameter: 200 x 50 mm | Feed: 80 - 1600 mm/min | Total power requirement: 0,23 kW | Dimensions of the ma...
Velen, Germany
DUMETA D-DWR-1-D
- Manufacturer: DUMETA
- Power requirement: 0.1 kW
Control: conventional | Delivery: ab Werk | Weight max.: 1000 kg | Workpiece diameter: 20-800 mm | Connected load frequency: 230 V | Speed: 100 - 1000 mm/min | Total power requirement: 0,1 kW | Weight of the mac...
Velen, Germany
OSTAS OHS 2070 x 220
- Manufacturer: Ostas
- Power requirement: 7 kW
Control: conventional | Sheet width: 2070 mm | Plate thickness: 10 mm | Pre-bending: 8 mm | Total power requirement: 7 kW | Weight of the machine ca.: 5 t | Dimensions of the machine ca.: 4050 x 1470 x 1550 mm
Velen, Germany